AD8544AR
ADI公司
- Lifecycle
- Active
- Stock
- 1986 件
- Package
- SOIC-14
- Series
- 線性放大器-儀器、運算放大器、緩衝放大器
對 AD8544AR 和 AD8544ARZ-REEL7 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD8544ARZ-REEL7 and AD8544AR are functionally equivalent CMOS quad operational amplifiers sharing the same core die, package, and electrical specifications; the only distinction is the tape-and-reel packaging of the REEL7 variant versus the standard tube/rail format. Both parts are drop-in interchangeable for design and qualification purposes, with the REEL7 option suited to high-volume automated assembly lines.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8544ARZ-REEL7 | AD8544AR | Why it matters |
|---|---|---|---|
| Amplifier Type | CMOS | CMOS | Both are CMOS rail-to-rail input/output op-amps, so the core amplifier topology is identical for substitution. |
| Number of Channels | 4 | 4 | Channel count must match for pin-compatible replacement in quad op-amp circuits. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Identical operating supply range ensures the part works in the same power rail conditions. |
| Gain Bandwidth Product | 1 MHz | 1 MHz | Same bandwidth means AC performance and stability characteristics are equivalent. |
| Input Offset Voltage (max) | 6 mV | 6 mV | Matching offset voltage limits ensure DC accuracy is preserved in precision signal chains. |
| Input Bias Current | 1 pA (typ) | 1 pA (typ) | Very low CMOS input bias current is critical for high-impedance sensor and filter applications. |
| Package / Mounting | 14-Lead SOIC (surface mount, tape and reel) | 14-Lead SOIC (surface mount) | Same SOIC-14 footprint allows drop-in board replacement; only the packaging format (reel vs. tube) differs. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Identical temperature ratings confirm equivalent environmental robustness. |
| Quiescent Current per Amplifier | 45 µA (typ) | 45 µA (typ) | Same low quiescent current supports battery-powered and low-power designs interchangeably. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8544AR | AD8544ARZ-REEL7 |
|---|---|---|
| Part Status | Obsolete | Active |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 4 | 4 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.92V/µs | 0.92V/µs |
| Gain Bandwidth Product | 1 MHz | 1 MHz |
| Current - Input Bias | 4 pA | 4 pA |
| Voltage - Input Offset | 1 mV | 1 mV |
| Supply Current | 45µA (x4 Channels) | 45µA (x4 Channels) |
| Current - Output / Channel | 30 mA | 30 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
Both parts are the same AD8544 quad CMOS operational amplifier die from Analog Devices. The AD8544ARZ-REEL7 is supplied in a 14-lead SOIC_N (R-14) package on a 7-inch tape-and-reel carrier for automated assembly, while AD8544AR is the tube/rail-delivered version of the same 14-lead SOIC_N package. The "Z" suffix denotes RoHS-compliant lead finish (matte tin), and the "-REEL7" suffix denotes the 7-inch reel packaging quantity.
Yes. Both variants share the same datasheet specifications for the AD8544: quad rail-to-rail input/output CMOS op amp, 1 MHz gain-bandwidth product, 0.92 V/µs slew rate, 45 µA typical supply current per amplifier, 2.7 V to 5.5 V single-supply operation, and the same 14-lead SOIC_N pinout. The only differences are packaging format and the RoHS-compliant "Z" designation on the reeled part.
The "Z" suffix indicates the RoHS-compliant, lead-free (matte tin) finish per Analog Devices' ordering guide. The "-REEL7" suffix indicates the device is supplied on a 7-inch tape-and-reel carrier. AD8544AR without the "Z" is the non-RoHS-compliant leaded-finish version; designers should confirm the finish required by their assembly process and compliance requirements.
Yes, provided the board accepts the 14-lead SOIC_N (R-14) footprint, which is identical for both variants. Pin functions, package dimensions, and electrical specifications match the AD8544 datasheet. The substitution only changes the delivery format (tape-and-reel vs. tube) and the lead finish (RoHS-compliant vs. non-RoHS), so reflow profile and solderability should be validated for the chosen finish.
Per the AD8544 datasheet, both parts operate from a single supply of 2.7 V to 5.5 V (or dual supplies within that range) and draw a typical supply current of 45 µA per amplifier (180 µA total for the quad). They are specified for rail-to-rail input and output swing, making them suitable for low-power, low-voltage signal conditioning.
The AD8544 datasheet specifies a 1 MHz unity-gain bandwidth, a 0.92 V/µs slew rate, and a typical input bias current in the picoamp range, consistent with its CMOS input stage. These parameters are identical for AD8544ARZ-REEL7 and AD8544AR because they are the same silicon device; only packaging and finish differ.
Both are offered in the 14-lead SOIC_N package (Analog Devices R-14 suffix), a 3.9 mm body width narrow SOIC. The pinout is the standard quad op amp configuration: four amplifiers with shared V+ and V− supply pins. Tape-and-reel (AD8544ARZ-REEL7) and tube (AD8544AR) options use the same package outline.
AD8544ARZ-REEL7 is the appropriate choice for automated surface-mount assembly because it is supplied on 7-inch tape-and-reel carriers compatible with pick-and-place feeders. AD8544AR in tube/rail format is typically used for low-volume prototyping or manual assembly. Both share the same electrical performance and package footprint.