AD8544AR
ADI公司
- Lifecycle
- Active
- Stock
- 1986 件
- Package
- SOIC-14
- Series
- 線性放大器-儀器、運算放大器、緩衝放大器
對 AD8544AR 和 AD8542AR-REEL7 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD8544AR and AD8542AR-REEL7 are both quad and dual CMOS rail-to-rail operational amplifiers from the same AD854x family, sharing identical per-channel electrical characteristics, supply voltage range, and SOIC package family. The AD8544AR integrates four amplifiers in a 14-lead SOIC, while the AD8542AR-REEL7 provides two amplifiers in an 8-lead SOIC supplied on tape and reel. Because the channel count and package footprint differ, the AD8542AR-REEL7 is not a pin-for-pin drop-in for the AD8544AR, but it is a strong functional candidate where a dual amplifier in a smaller footprint satisfies the circuit requirement. Designers should confirm channel count, board footprint, and reel packaging needs before substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8544AR | AD8542AR-REEL7 | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 4 (Quad) | 2 (Dual) | Determines how many independent op-amp channels are available in a single package; a quad and a dual are not directly interchangeable in a given circuit layout. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Defines the operating supply window; matching ranges ensure the part works in the same single-supply systems. |
| Input Offset Voltage (max) | 6 mV | 6 mV | Sets the worst-case DC error at the input; identical values mean comparable precision in DC signal chains. |
| Input Bias Current (typ) | 1 pA | 1 pA | Very low CMOS input bias current minimizes errors in high-impedance sensor and filter circuits; matching values preserve performance. |
| Gain Bandwidth Product | 1 MHz | 1 MHz | Determines the achievable closed-loop bandwidth; identical GBW means similar AC response and stability behavior. |
| Slew Rate | 0.92 V/µs | 0.92 V/µs | Limits large-signal transient response; matching slew rates ensure equivalent dynamic performance. |
| Supply Current per Amplifier (typ) | 45 µA | 45 µA | Governs power consumption in battery-powered designs; equal per-amplifier current keeps power budgets consistent. |
| Input Voltage Noise Density | 42 nV/√Hz | 42 nV/√Hz | Affects noise floor in low-level signal amplification; identical noise density preserves signal-to-noise performance. |
| Package Type | 14-Lead SOIC | 8-Lead SOIC | Footprint and pin count differ, so the PCB layout must be redesigned; the parts are not drop-in replacements. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8544AR | AD8542AR-REEL7 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Obsolete | Obsolete |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 4 | 2 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.92V/µs | 0.92V/µs |
| Gain Bandwidth Product | 1 MHz | 1 MHz |
| Current - Input Bias | 4 pA | 4 pA |
| Voltage - Input Offset | 1 mV | 1 mV |
| Supply Current | 45µA (x4 Channels) | 45µA (x2 Channels) |
| Current - Output / Channel | 30 mA | 30 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8544AR is a quad (four-channel) rail-to-rail CMOS operational amplifier in a 14-lead SOIC package, while the AD8542AR-REEL7 is a dual (two-channel) rail-to-rail CMOS op amp in an 8-lead SOIC package supplied on a 7-inch reel. Both share the same AD854x family core specifications, including 1 MHz gain bandwidth product and rail-to-rail input/output, but differ in channel count, package pinout, and packaging format.
Yes. Both devices are members of the AD854x family and share the same per-channel specifications, including a 1 MHz unity-gain bandwidth, rail-to-rail input and output swing, and single-supply operation from 2.7 V to 5.5 V. The primary differences are the number of integrated channels and the package/pinout.
No. The AD8544AR is a 14-lead quad device and the AD8542AR-REEL7 is an 8-lead dual device; they have different pin counts, pinouts, and PCB footprints. A direct drop-in substitution is not possible without a board redesign or an appropriate package adapter.
Both devices operate from a single supply of 2.7 V to 5.5 V, and they also support dual-supply operation within the corresponding total supply range. This makes them suitable for low-voltage, battery-powered, and 3 V/5 V mixed-signal systems.
Both the AD8544AR and AD8542AR-REEL7 feature a unity-gain bandwidth of 1 MHz, which is a shared family specification of the AD854x series. This bandwidth is suitable for low-frequency signal conditioning, sensor interfacing, and general-purpose amplification.
Yes. Both devices provide rail-to-rail input and output swing, allowing signals to approach both supply rails. This is beneficial in low-voltage single-supply designs where maximizing dynamic range is important.
The AD8544AR is supplied in a 14-lead SOIC package in tube or standard reel quantities depending on the ordering code. The AD8542AR-REEL7 is supplied in an 8-lead SOIC package on a 7-inch tape-and-reel, which is suited to automated surface-mount assembly lines.
The AD8544AR should be selected when four independent op-amp channels are needed in one package, since it integrates four amplifiers in a 14-lead SOIC. The AD8542AR-REEL7 provides only two channels and would require two devices to achieve four channels, consuming additional board area.