AD8544AR
ADI公司
- Lifecycle
- Active
- Stock
- 1986 件
- Package
- SOIC-14
- Series
- 線性放大器-儀器、運算放大器、緩衝放大器
對 AD8544AR 和 AD8542ARZ 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD8542ARZ and AD8544AR are both CMOS rail-to-rail input/output operational amplifiers from the same AD854x family, sharing identical supply voltage range, bandwidth, and package type, but they differ in channel count (dual versus quad), making the AD8544AR a functional candidate only where the additional two channels and the associated pinout change are acceptable in the target design.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8542ARZ | AD8544AR | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 | 4 | Determines how many independent op-amp channels are available in a single package, directly affecting circuit density and channel count. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Defines the operating supply window; matching ranges ensure the parts are interchangeable in the same power rail design. |
| Input Offset Voltage (max) | 6 mV | 6 mV | Sets the worst-case DC error at the input; identical values mean comparable precision in signal conditioning. |
| Gain Bandwidth Product | 1 MHz | 1 MHz | Determines the frequency range over which the amplifier provides useful gain; matching values preserve AC performance. |
| Input Bias Current (typ) | 1 pA | 1 pA | Very low CMOS input bias current minimizes errors in high-impedance sensor and filter circuits; equal values ensure equivalent behavior. |
| Slew Rate | 0.92 V/µs | 0.92 V/µs | Governs large-signal transient response; identical slew rates mean comparable dynamic performance. |
| Quiescent Current per Amplifier (typ) | 45 µA | 45 µA | Affects total power consumption; per-amplifier matching allows predictable power budgeting when channel count changes. |
| Package | 8-Lead SOIC | 14-Lead SOIC | Footprint and pin count differ, so PCB layout and assembly must be redesigned when substituting one for the other. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Confirms both parts are rated for the same environmental conditions, supporting use in industrial and automotive applications. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8544AR | AD8542ARZ |
|---|---|---|
| Part Status | Obsolete | Active |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | 4 | 2 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.92V/µs | 0.92V/µs |
| Gain Bandwidth Product | 1 MHz | 1 MHz |
| Current - Input Bias | 4 pA | 4 pA |
| Voltage - Input Offset | 1 mV | 1 mV |
| Supply Current | 45µA (x4 Channels) | 45µA (x2 Channels) |
| Current - Output / Channel | 30 mA | 30 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8542ARZ is a dual (2-channel) rail-to-rail CMOS operational amplifier in an 8-lead SOIC package, while the AD8544AR is a quad (4-channel) rail-to-rail CMOS op amp in a 14-lead SOIC package. Both share the same core amplifier design and similar per-channel specifications, but differ in channel count and package pin count.
No. The AD8542ARZ uses an 8-lead SOIC (R-8) package, and the AD8544AR uses a 14-lead SOIC (R-14) package. They have different pin counts and pinouts, so they are not drop-in replacements for each other on the same PCB footprint.
Yes. Both devices are specified for single-supply operation from 2.7 V to 5.5 V, and they also support dual-supply operation within that total range. This makes them suitable for low-voltage battery-powered and portable systems.
Both the AD8542ARZ and AD8544AR have a gain bandwidth product of 1 MHz, allowing them to handle general-purpose signal conditioning, filtering, and buffering tasks in low-power applications.
The AD8542ARZ (dual) typically draws about 45 µA per amplifier, while the AD8544AR (quad) also specifies approximately 45 µA per amplifier. Total quiescent current therefore scales with the number of channels: roughly 90 µA for the dual and roughly 180 µA for the quad, making both well suited to low-power designs.
Yes. Both devices feature rail-to-rail input and output (RRIO) capability, allowing input signals to swing to both supply rails and output voltage to swing close to both rails, which maximizes dynamic range in low-voltage systems.
Both the AD8542ARZ and AD8544AR specify a typical input offset voltage of 1 mV (with a maximum around 6 mV) and very low input bias current in the picoampere range, thanks to their CMOS input stage. These characteristics suit high-impedance sensor interfaces and precision low-power signal chains.
The AD8542ARZ (dual) is typically chosen for compact designs needing two amplifier channels, such as single-sensor signal conditioning or two-stage filters. The AD8544AR (quad) is preferred when four channels are required in one package, such as multi-sensor interfaces, active filter banks, or multi-channel buffering, reducing board space and component count versus using two dual devices.