圖片僅供參考
STF5N95K5
+物料清單MOSFET N-CH 950V 3.5A TO220FP
-
製造商意法半導體
-
製造商部分 #STF5N95K5
-
有存貨6658
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Series | SuperMESH5™ |
| PartStatus | Active |
| FETType | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| DraintoSourceVoltage(Vdss) | 950 V |
| Current-ContinuousDrain(Id)@25°C | 3.5A (Tc) |
| DriveVoltage(MaxRdsOn,MinRdsOn) | 10V |
| RdsOn(Max)@Id,Vgs | 2.5Ohm @ 1.5A, 10V |
| Vgs(th)(Max)@Id | 5V @ 100µA |
| GateCharge(Qg)(Max)@Vgs | 12.5 nC @ 10 V |
| Vgs(Max) | ±30V |
| InputCapacitance(Ciss)(Max)@Vds | 220 pF @ 100 V |
| PowerDissipation(Max) | 25W (Tc) |
| OperatingTemperature | -55°C ~ 150°C (TJ) |
| MountingType | Through Hole |
| SupplierDevicePackage | TO-220FP |
| Package/Case | TO-220-3 Full Pack |
| BaseProductNumber | STF5N95 |
概述
Description
STF5N95K5 is a type of power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) produced by STMicroelectronics. It is designed for high-efficiency power management applications, particularly in switch-mode power supplies (SMPS) and converters.
Key features include:
1. Voltage Rating: It typically has a high breakdown voltage, making it suitable for various voltage applications.
2. Low On-Resistance: This characteristic reduces conduction losses, enhancing efficiency and thermal performance.
3. Fast Switching Speed: Ideal for high-frequency applications, contributing to improved overall performance in power conversion.
4. Thermal Performance: Often packaged to dissipate heat effectively, allowing for reliable operation under demanding conditions.
Overall, the STF5N95K5 is utilized in applications like motor drives, power supplies, and electric vehicles, where efficiency and reliability are critical.
Key features include:
1. Voltage Rating: It typically has a high breakdown voltage, making it suitable for various voltage applications.
2. Low On-Resistance: This characteristic reduces conduction losses, enhancing efficiency and thermal performance.
3. Fast Switching Speed: Ideal for high-frequency applications, contributing to improved overall performance in power conversion.
4. Thermal Performance: Often packaged to dissipate heat effectively, allowing for reliable operation under demanding conditions.
Overall, the STF5N95K5 is utilized in applications like motor drives, power supplies, and electric vehicles, where efficiency and reliability are critical.
Equivalent
The STF5N95K5 chip, a 950V N-channel MOSFET, has several equivalent products, including the STP5N95K5, IRF840, and FQP13N90. Other alternatives may include the MTP5N95E and BUK955R-50. Always verify specifications such as voltage, current rating, and RDS(on) to ensure compatibility for your specific application.
Features
The STF5N95K5 is a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) designed for high-efficiency applications. Key features include:
1. Voltage Rating: Typically operates at 950V, making it suitable for high-voltage applications.
2. Current Rating: Capable of handling up to 5A, ideal for power management tasks.
3. Low RDS(on): Offers a low on-resistance, which reduces power losses during operation, enhancing overall efficiency.
4. Fast Switching Speed: Designed for quick switching capabilities, benefiting applications such as power supplies and motor drives.
5. Thermal Performance: Equipped with a maximum junction temperature rating, allowing for reliable operation at elevated temperatures.
6. Package: Available in a TO-220 package, facilitating easy mounting and heat dissipation.
7. Applications: Commonly used in power converters, inverters, and other high-voltage power management systems.
These features make the STF5N95K5 suitable for a wide range of industrial and consumer electronics applications, promoting energy efficiency and reliability.
1. Voltage Rating: Typically operates at 950V, making it suitable for high-voltage applications.
2. Current Rating: Capable of handling up to 5A, ideal for power management tasks.
3. Low RDS(on): Offers a low on-resistance, which reduces power losses during operation, enhancing overall efficiency.
4. Fast Switching Speed: Designed for quick switching capabilities, benefiting applications such as power supplies and motor drives.
5. Thermal Performance: Equipped with a maximum junction temperature rating, allowing for reliable operation at elevated temperatures.
6. Package: Available in a TO-220 package, facilitating easy mounting and heat dissipation.
7. Applications: Commonly used in power converters, inverters, and other high-voltage power management systems.
These features make the STF5N95K5 suitable for a wide range of industrial and consumer electronics applications, promoting energy efficiency and reliability.
Pinout
The STF5N95K5 is an N-channel MOSFET (metal-oxide-semiconductor field-effect transistor) with a total of 3 pins. The pin configuration and their functions are as follows:
1. Gate (G): This pin controls the MOSFET's operation. A voltage applied to this pin turns the MOSFET on or off.
2. Drain (D): The current flows out of this pin when the MOSFET is on. It is connected to the load in a circuit.
3. Source (S): This pin is connected to the ground or negative supply in a circuit, completing the current path when the device is operational.
The STF5N95K5 is designed for high-voltage applications, with a maximum voltage rating of 950V and a continuous drain current rating of up to 5A. It is commonly used in power supply circuits and other applications requiring efficient switching.
1. Gate (G): This pin controls the MOSFET's operation. A voltage applied to this pin turns the MOSFET on or off.
2. Drain (D): The current flows out of this pin when the MOSFET is on. It is connected to the load in a circuit.
3. Source (S): This pin is connected to the ground or negative supply in a circuit, completing the current path when the device is operational.
The STF5N95K5 is designed for high-voltage applications, with a maximum voltage rating of 950V and a continuous drain current rating of up to 5A. It is commonly used in power supply circuits and other applications requiring efficient switching.
Manufacturer
The STF5N95K5 is manufactured by STMicroelectronics, a global semiconductor company. STMicroelectronics is a leader in the design and manufacturing of a wide range of products, including microcontrollers, power management solutions, sensors, and various other semiconductor devices. The company serves multiple sectors such as automotive, industrial, personal electronics, and communication equipment.
Founded in 1987 and headquartered in Geneva, Switzerland, STMicroelectronics is known for its innovation and development in the electronics industry. The company focuses on creating solutions that improve energy efficiency, enhance connectivity, and enable smart technologies. With a strong global presence, STMicroelectronics operates several manufacturing facilities and R&D centers worldwide, making it a significant player in the semiconductor market.
Founded in 1987 and headquartered in Geneva, Switzerland, STMicroelectronics is known for its innovation and development in the electronics industry. The company focuses on creating solutions that improve energy efficiency, enhance connectivity, and enable smart technologies. With a strong global presence, STMicroelectronics operates several manufacturing facilities and R&D centers worldwide, making it a significant player in the semiconductor market.
Application
The STF5N95K5 is a power MOSFET commonly used in various applications, including:
1. Switching Power Supplies: For efficient power conversion in DC-DC converters and inverters.
2. Motor Drives: Used in electric vehicle drives and industrial motor control for efficient switching.
3. Power Management: In battery management systems and power distribution for energy efficiency.
4. Consumer Electronics: Employed in devices like laptops and smartphones for power regulation.
5. LED Drivers: Used in lighting applications for efficient current control.
Its high voltage and current capabilities make it suitable for these applications.
1. Switching Power Supplies: For efficient power conversion in DC-DC converters and inverters.
2. Motor Drives: Used in electric vehicle drives and industrial motor control for efficient switching.
3. Power Management: In battery management systems and power distribution for energy efficiency.
4. Consumer Electronics: Employed in devices like laptops and smartphones for power regulation.
5. LED Drivers: Used in lighting applications for efficient current control.
Its high voltage and current capabilities make it suitable for these applications.
Package
The STF5N95K5 is packaged in a surface mount device (SMD) format, specifically in a DPAK (TO-252) package. This type of packaging allows for efficient thermal management and is suitable for applications requiring reliable performance in compact spaces.
