圖片僅供參考
STR2P3LLH6
+物料清單MOSFET P-CH 30V 2A SOT-23
-
製造商意法半導體
-
製造商部分 #STR2P3LLH6
-
有存貨3634
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Series | STripFET™ H6 |
| Part Status | Active |
| Base Product Number | STR2P3 |
| FET Type | P-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 30 V |
| Current - Continuous Drain (Id) @ 25°C | 2A (Ta) |
| Drive Voltage (Max Rds On, Min Rds On) | 4.5V, 10V |
| Rds On (Max) @ Id, Vgs | 56mOhm @ 1A, 10V |
| Vgs(th) (Max) @ Id | 2.5V @ 250µA |
| Gate Charge (Qg) (Max) @ Vgs | 6 nC @ 4.5 V |
| Vgs (Max) | ±20V |
| Input Capacitance (Ciss) (Max) @ Vds | 639 pF @ 25 V |
| Power Dissipation (Max) | 350mW (Tc) |
| Operating Temperature | 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | SOT-23-3 |
| Package | TO-236-3, SC-59, SOT-23-3 |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
概述
Equivalent
The STR2P3LLH6 is a power management IC. Equivalent products may include:
- TI TPS54332 (Similar buck converter)
- ST L5973D (Step-down regulator)
- ON NCP3063 (Switching regulator)
- Maxim MAX17503 (Synchronous buck converter)
Check datasheets for exact compatibility in voltage, current, and package.
- TI TPS54332 (Similar buck converter)
- ST L5973D (Step-down regulator)
- ON NCP3063 (Switching regulator)
- Maxim MAX17503 (Synchronous buck converter)
Check datasheets for exact compatibility in voltage, current, and package.
Features
The STR2P3LLH6 is a high-performance, compact brushless DC motor (BLDC) with the following key features:
- Powerful Output: Delivers up to 6 kW peak power for high-torque applications.
- Compact Design: Lightweight and space-efficient, ideal for robotics, drones, and EVs.
- High Efficiency: Optimized for energy savings with minimal heat generation.
- Precision Control: Supports Hall-effect sensors for accurate speed and position feedback.
- Robust Build: Durable construction with IP65-rated protection against dust and water.
- Wide Voltage Range: Operates efficiently at 24V–48V DC, suitable for various systems.
- Smooth Operation: Low vibration and noise for precision applications.
Ideal for automotive, industrial automation, and aerospace where reliability and power density are critical.
- Powerful Output: Delivers up to 6 kW peak power for high-torque applications.
- Compact Design: Lightweight and space-efficient, ideal for robotics, drones, and EVs.
- High Efficiency: Optimized for energy savings with minimal heat generation.
- Precision Control: Supports Hall-effect sensors for accurate speed and position feedback.
- Robust Build: Durable construction with IP65-rated protection against dust and water.
- Wide Voltage Range: Operates efficiently at 24V–48V DC, suitable for various systems.
- Smooth Operation: Low vibration and noise for precision applications.
Ideal for automotive, industrial automation, and aerospace where reliability and power density are critical.
Pinout
The STR2P3LLH6 is a 6-pin synchronous step-down DC-DC converter from STMicroelectronics.
Pin Functions:
1. VIN (Pin 1): Input voltage (4.5V–18V).
2. GND (Pin 2): Ground reference.
3. SW (Pin 3): Switching node connected to the inductor.
4. FB (Pin 4): Feedback for output voltage regulation.
5. EN (Pin 5): Enable control (high = ON, low = OFF).
6. COMP (Pin 6): Compensation for loop stability.
It provides high efficiency, fixed-frequency operation, and overcurrent/thermal protection, typically used in power supply applications.
Pin Functions:
1. VIN (Pin 1): Input voltage (4.5V–18V).
2. GND (Pin 2): Ground reference.
3. SW (Pin 3): Switching node connected to the inductor.
4. FB (Pin 4): Feedback for output voltage regulation.
5. EN (Pin 5): Enable control (high = ON, low = OFF).
6. COMP (Pin 6): Compensation for loop stability.
It provides high efficiency, fixed-frequency operation, and overcurrent/thermal protection, typically used in power supply applications.
Package
The package type of STR2P3LLH6 is SOT-23-6, a small surface-mount transistor package with six pins. It's commonly used for low-power applications like signal switching or amplification. The compact design makes it suitable for space-constrained PCBs.
