ADS7843E vs ADS7844N

對 ADS7843E 和 ADS7844N 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7844N and ADS7843E are not functionally interchangeable despite sharing a similar SAR ADC architecture and package family. The ADS7844N is an 8-channel, 12-bit ADC with a serial interface, while the ADS7843E is a 4-wire touch screen controller with an integrated 12-bit ADC and on-chip drivers. Their channel count, input configuration, control interface, and intended application differ fundamentally, so substituting one for the other is not feasible without a complete redesign of the surrounding circuitry and firmware.

Different channel count Different input configuration Different control interface Different application function

Parts at a glance

Part A

ADS7843E

伯爾·布朗

Lifecycle
Active
Stock
6691 件
Package
SSOP-16
Series
資料獲取-觸控式螢幕控制器
Part B

ADS7844N

德州儀器

Lifecycle
Active
Stock
1495 件
Package
SSOP-20
Series
資料獲取-模數轉換器(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7844N ADS7843E Why it matters
Resolution 12 bit 12 bit Both provide 12-bit resolution, so conversion precision is comparable for substitutability.
Number of Input Channels 8 single-ended / 4 differential 4 single-ended (touchscreen X/Y) The ADS7844N supports more channels, making it suitable for multi-signal acquisition, while the ADS7843E is dedicated to touchscreen coordinate sensing.
Interface Type SPI (serial) SPI (serial) Both use a serial SPI interface, so host microcontroller compatibility is similar.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Identical supply range means both can operate in the same system power domain.
Primary Application General-purpose 8-channel ADC Touchscreen controller (resistive) The ADS7843E includes touchscreen-specific features (pen-down detection, X/Y drive), while the ADS7844N is a general ADC, so they are not directly substitutable in touch applications.
Package SSOP-20 SSOP-16 Different pin counts and footprints prevent drop-in board replacement without layout changes.
Conversion Rate Up to 200 kSPS Up to 125 kSPS The ADS7844N offers a higher sampling rate, which matters for faster signal acquisition requirements.
On-chip Reference External reference required External reference required Both require an external reference, so reference design considerations are equivalent.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings mean both suit the same industrial environments.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7844N
Part Status Active Active
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 85°C
Mounting Type Surface Mount -
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4, 8
Input Type - Differential, Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V

Frequently asked questions

What are the primary functional differences between the ADS7844N and ADS7843E?

The ADS7844N is an 8-channel, 12-bit sampling analog-to-digital converter (ADC) with a serial interface, typically used for general-purpose multiplexed signal acquisition. The ADS7843E is a 4-wire touch screen controller that integrates a 12-bit ADC with an on-chip drivers and control logic specifically for resistive touch screen digitizing. The ADS7844N is a general-purpose ADC, while the ADS7843E is a dedicated touch screen controller.

Are the ADS7844N and ADS7843E pin-compatible?

No. The ADS7844N is offered in a 20-pin SSOP package, while the ADS7843E is offered in a 16-pin SSOP package. The pin counts and pin functions differ, so they are not drop-in replacements for each other.

Do both devices use the same serial interface?

Both devices use a serial interface, but the protocols differ. The ADS7844N uses a standard SPI-compatible serial interface for reading conversion results. The ADS7843E uses a specific serial interface designed for touch screen coordinate readout, including control bits for channel selection and power-down modes. The interface timing and command structures are not identical.

What are the input channel configurations of each device?

The ADS7844N provides 8 input channels that can be configured as single-ended or differential pairs. The ADS7843E provides inputs for a 4-wire resistive touch screen (X+, X-, Y+, Y-) and also includes two auxiliary inputs (IN3, IN4) for additional measurements. The channel architecture is fundamentally different due to their intended applications.

Can the ADS7843E be used as a general-purpose 8-channel ADC like the ADS7844N?

No. The ADS7843E is specifically designed as a touch screen controller with a fixed input structure for 4-wire touch screens and two auxiliary inputs. It does not provide the 8-channel multiplexed ADC functionality of the ADS7844N. Substituting one for the other in a general-purpose ADC application is not appropriate.

What are the typical supply voltage and reference requirements for these devices?

Both devices typically operate from a single supply voltage in the range of 2.7V to 5.25V. The ADS7844N requires an external reference voltage (VREF) for the ADC. The ADS7843E can operate with an external reference or use the supply voltage as the reference, depending on the configuration. Designers should consult the respective datasheets for exact reference voltage ranges and requirements.

Which device is suitable for battery-powered portable applications?

Both devices are designed for low-power operation and are suitable for portable applications. The ADS7843E includes automatic power-down between conversions, which is beneficial for touch screen applications where conversions are intermittent. The ADS7844N also features power-down modes. The choice depends on whether the application requires a general-purpose ADC or a dedicated touch screen controller.