ADS7843E
伯爾·布朗
- Lifecycle
- Active
- Stock
- 6691 件
- Package
- SSOP-16
- Series
- 資料獲取-觸控式螢幕控制器
對 ADS7843E 和 ADS7842EB 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS7843E and ADS7842EB are not functionally interchangeable. Although both are 4-wire resistive touch screen controllers from Texas Instruments, they differ in resolution, package, supply voltage range, and reference architecture, so the ADS7842EB cannot directly replace the ADS7843E without design changes and validation.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7842EB | Why it matters |
|---|---|---|---|
| Resolution | 12-bit | 12-bit | Both are 12-bit SAR ADCs, so resolution is equivalent for touchscreen coordinate digitizing. |
| Number of Input Channels | 4 single-ended / 2 differential | 4 single-ended / 2 differential | Channel count determines how many touchscreen axes or auxiliary inputs can be sampled. |
| Interface Type | SPI (serial) | Parallel | The host interface differs fundamentally: SPI uses fewer pins while parallel offers faster bus access, affecting board layout and microcontroller compatibility. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Supply range must match the system rail; both support common 3.3 V and 5 V designs. |
| Package Type | SSOP-16 | SSOP-16 | Package footprint affects PCB layout and whether the parts are drop-in compatible. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Temperature range determines suitability for industrial versus commercial environments. |
| Conversion Rate | Up to 125 kSPS | Up to 200 kSPS | Higher throughput enables faster touch sampling and lower latency in the host system. |
| Internal Reference | Yes (2.5 V) | Yes (2.5 V) | An internal reference simplifies design by removing the need for an external voltage reference. |
| Power Consumption | Low power (typ. 500 µA at 5 V) | Low power (typ. 500 µA at 5 V) | Power draw is critical for battery-powered and portable touchscreen devices. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7842EB |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | Parallel |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Features | - | Selectable Address |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
No. The ADS7843E is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface, while the ADS7842EB is a 12-bit, 4-channel parallel-output sampling ADC. They differ in function, interface, and package, so they are not direct substitutes.
Both devices are 12-bit successive-approximation register (SAR) ADCs. The ADS7843E provides 12-bit resolution for touch screen coordinate measurement, and the ADS7842EB provides 12-bit resolution across four analog input channels.
The ADS7843E uses an SPI-compatible 3-wire serial interface for communication with a host controller. The ADS7842EB provides a parallel digital output interface, requiring a corresponding parallel bus on the host system.
No. The ADS7843E is offered in a 16-pin SSOP package, while the ADS7842EB is offered in a 28-pin SSOP package. The different pin counts and footprints prevent a direct PCB drop-in replacement.
The ADS7843E is intended for 4-wire resistive touch screen digitizer applications, converting touch coordinates to digital values. The ADS7842EB is a general-purpose 4-channel data acquisition ADC suited to multi-channel signal sampling rather than touch control.
Both devices support a single-supply operating range that includes 5 V and 3 V nominal operation, but the exact specified supply ranges and reference requirements should be confirmed against the respective manufacturer datasheets before design reuse.
No. The ADS7842EB lacks the touch screen drive and switching circuitry and the serial interface used by the ADS7843E, so it cannot directly serve as a touch screen controller replacement.