ADS7843E vs ADS7841EG4

對 ADS7843E 和 ADS7841EG4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E and ADS7841EG4 are not drop-in replacements for one another. Although both are 12-bit successive-approximation ADCs in a 16-pin SSOP package, they differ in resolution of control interface, channel configuration, and conversion architecture, so the ADS7841EG4 cannot be substituted directly for the ADS7843E without circuit and firmware redesign.

Different interface type Different channel configuration Different conversion architecture Different control protocol

Parts at a glance

Part A

ADS7843E

伯爾·布朗

Lifecycle
Active
Stock
6691 件
Package
SSOP-16
Series
資料獲取-觸控式螢幕控制器
Part B

ADS7841EG4

德州儀器

Lifecycle
Active
Stock
8773 件
Package
SSOP-16
Series
資料獲取-模數轉換器(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E ADS7841EG4 Why it matters
Resolution 12 bit 12 bit Both are 12-bit ADCs, so resolution is equivalent for substitutability.
Number of Input Channels 4 (single-ended) / 2 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many analog signals can be multiplexed into the ADC.
Interface Type SPI (serial) SPI (serial) Both use a serial SPI interface, allowing similar host microcontroller connections.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Compatible supply ranges allow operation in the same system power domains.
Sampling Rate 125 kSPS 200 kSPS Higher sampling rate supports faster signal acquisition; a difference may affect timing-critical designs.
Internal Reference No (external reference required) No (external reference required) Both require an external reference, so reference circuitry must be provided in either case.
Package / Mounting 16-SSOP (surface mount) 16-SSOP (surface mount) Identical package and footprint enable direct board-level replacement.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Matching temperature ranges ensure equivalent environmental robustness.
Power Consumption Low power (typ. ~0.5 mW at 2.7 V) Low power (typ. ~0.9 mW at 5 V) Power draw affects battery life and thermal budget in portable designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7841EG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 125°C
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the key differences between the ADS7843E and ADS7841EG4?

The ADS7843E is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface, housed in a 16-pin SSOP package. The ADS7841EG4 is a 4-channel, 12-bit SAR ADC with an SPI-compatible serial interface, housed in a 16-pin SSOP package (the "G4" suffix denotes lead-free/RoHS-compliant construction). The ADS7843E integrates touch screen drive and sense control logic, while the ADS7841EG4 is a general-purpose 4-channel ADC without touch screen control circuitry.

Are the ADS7843E and ADS7841EG4 pin-compatible?

No. Although both devices are offered in a 16-pin SSOP package, their pin functions differ. The ADS7843E includes touch screen driver outputs (X+, X-, Y+, Y-) and a pen-interrupt output, whereas the ADS7841EG4 provides four analog input channels (CH0–CH3) with a different pin assignment. They are not direct pin-for-pin replacements.

Can the ADS7843E be replaced by the ADS7841EG4 in an existing design?

No, not as a direct drop-in replacement. The ADS7843E contains dedicated touch screen control logic and drive outputs that the ADS7841EG4 does not provide. Substitution would require redesign of the analog front end, the control firmware, and the PCB layout to accommodate the different pin functions and the absence of touch screen drive circuitry.

What is the resolution and architecture of both devices?

Both the ADS7843E and ADS7841EG4 use a 12-bit successive-approximation register (SAR) ADC architecture, providing 12-bit resolution over their respective analog input ranges.

What type of serial interface do the ADS7843E and ADS7841EG4 use?

Both devices use an SPI-compatible serial interface for communication with a host microcontroller or processor, supporting standard serial clock, data-in, data-out, and chip-select signals.

What are the typical applications for each device?

The ADS7843E is intended for 4-wire resistive touch screen digitizer applications such as handheld terminals, PDAs, and portable instruments. The ADS7841EG4 is a general-purpose 4-channel 12-bit ADC suited to industrial measurement, data acquisition, and multi-channel sensor monitoring where touch screen control is not required.

Does the "G4" suffix on the ADS7841EG4 indicate a functional difference from the ADS7843E?

No. The "G4" suffix on the ADS7841EG4 denotes lead-free (RoHS-compliant) packaging and does not indicate a functional or parametric change relative to the base ADS7841. It does not make the device functionally equivalent to the ADS7843E, which remains a distinct touch screen controller product.