ADS7844N vs ADS7842EB

對 ADS7844N 和 ADS7842EB 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7844N and ADS7842EB are not drop-in replacements for one another. Although both are 12-bit successive-approximation ADCs from Texas Instruments, they differ in channel configuration, analog input architecture, package footprint, and serial interface framing, so a direct board-level substitution is not possible without redesign.

Different channel configuration Different input architecture Different package footprint Different interface framing

Parts at a glance

Part A

ADS7844N

德州儀器

Lifecycle
Active
Stock
1495 件
Package
SSOP-20
Series
資料獲取-模數轉換器(ADC)
Part B

ADS7842EB

伯爾·布朗

Lifecycle
Active
Stock
8281 件
Package
SSOP-28
Series
資料獲取-模數轉換器(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7844N ADS7842EB Why it matters
Resolution 12 bit 12 bit Both are 12-bit ADCs, so conversion resolution is equivalent and neither offers a resolution advantage for substitutability.
Number of Input Channels 8 single-ended / 4 differential 4 single-ended / 2 differential The ADS7844N supports twice as many input channels, which affects how many signals can be multiplexed into a single converter.
Sampling Rate 200 kSPS 200 kSPS Identical throughput means timing and signal bandwidth requirements are met equally by both parts.
Interface Type SPI / QSPI / Microwire serial Parallel (byte/word) The interface differs fundamentally: ADS7844N uses a serial bus while ADS7842EB uses a parallel bus, so they are not drop-in compatible at the system level.
Supply Voltage 2.7 V to 5.25 V 5 V (single supply) The wider supply range of the ADS7844N allows low-voltage operation, whereas the ADS7842EB requires a 5 V rail.
Package 20-pin SSOP 28-pin SSOP Different pin counts and footprints mean the two devices are not physically interchangeable on the same PCB layout.
Input Type Single-ended / differential Single-ended / differential Both support single-ended and differential inputs, so signal conditioning topology can remain similar.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings mean both suit the same industrial-grade environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7844N ADS7842EB
Supplier - Rochester Electronics, LLC
Part Status Active Active
Number of Bits 12 12
Sampling Rate(Per Second) 200k 200k
Number of Inputs 4, 8 4
Input Type Differential, Single Ended Single Ended
Data Interface SPI Parallel
Configuration MUX-S/H-ADC MUX-S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Features - Selectable Address
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key architectural differences between the ADS7844N and ADS7842EB?

The ADS7844N is an 8-channel, 12-bit successive-approximation register (SAR) analog-to-digital converter with a serial SPI/QSPI/Microwire interface, housed in a 20-pin SSOP package. The ADS7842EB is a 4-channel, 12-bit SAR ADC with a parallel interface, housed in a 28-pin SSOP package. The ADS7844N provides twice the input channel count and a serial interface, while the ADS7842EB offers a parallel interface for faster host connectivity.

Are the ADS7844N and ADS7842EB pin-to-pin compatible?

No. The ADS7844N uses a 20-pin SSOP package, while the ADS7842EB uses a 28-pin SSOP package. The differing pin counts and package sizes mean they are not pin-to-pin compatible and cannot be dropped into the same PCB footprint without redesign.

What are the input channel configurations of each device?

The ADS7844N provides 8 input channels that can be configured as single-ended or differential pairs. The ADS7842EB provides 4 input channels, also configurable as single-ended or differential inputs. The ADS7844N is therefore better suited to applications requiring more analog input channels.

How do the digital interfaces of the ADS7844N and ADS7842EB differ?

The ADS7844N uses a serial interface compatible with SPI, QSPI, and Microwire protocols, reducing pin count and board routing. The ADS7842EB uses a parallel interface, which provides faster data throughput to the host processor but requires more I/O pins. The choice depends on host interface availability and throughput requirements.

Do the ADS7844N and ADS7842EB share the same resolution and sampling performance?

Both devices are 12-bit SAR ADCs. However, their maximum throughput rates differ: the ADS7844N supports up to 200 kSPS, while the ADS7842EB supports up to 200 kSPS as well. Designers should confirm the exact rated throughput from the respective manufacturer datasheets for the specific grade and operating conditions.

What are the supply voltage and reference requirements for these ADCs?

Both the ADS7844N and ADS7842EB operate from a single 2.7 V to 5.25 V analog supply. Each requires an external reference voltage applied to its VREF pin to set the full-scale input range. The reference voltage must be stable and within the device's specified limits as documented in the respective datasheets.

Which device is more suitable for a design with limited PCB space and few host I/O pins?

The ADS7844N is generally more suitable for space-constrained designs with limited host I/O, because its serial interface requires fewer pins and its 20-pin SSOP package is smaller than the 28-pin SSOP of the ADS7842EB. The ADS7842EB's parallel interface is preferable when host I/O is abundant and higher data throughput is needed.

Can the ADS7844N and ADS7842EB be used interchangeably in an existing design?

No. Due to differences in package pin count, interface type (serial versus parallel), and channel count, the two devices are not interchangeable without PCB redesign and firmware changes. A substitution requires validating package footprint, interface timing, channel configuration, and reference circuitry against the manufacturer datasheets.