ADS7844N
德州儀器
- Lifecycle
- Active
- Stock
- 1495 件
- Package
- SSOP-20
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS7844N 和 ADS7841E/2K5G4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS7841E/2K5G4 is a functional replacement candidate for the ADS7844N in many applications, sharing the same 12-bit SAR architecture, SPI-compatible serial interface, and single 2.7 V to 5 V supply. However, the ADS7844N provides four input channels versus the single channel of the ADS7841E/2K5G4, and the two devices use different package types, so the replacement is only valid where single-channel conversion and the alternate footprint are acceptable. Designers should validate channel count requirements and board layout before substituting.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7844N | ADS7841E/2K5G4 | Why it matters |
|---|---|---|---|
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 4 (single-ended) / 2 (differential) | Determines how many analog signals can be digitized; the ADS7844N supports twice as many channels, which is critical for multi-sensor applications. |
| Resolution | 12 bit | 12 bit | Both provide 12-bit resolution, so measurement precision is equivalent and they are interchangeable in this respect. |
| Sampling Rate | 200 kSPS | 200 kSPS | Identical maximum throughput means both can handle the same signal bandwidth and timing requirements. |
| Supply Voltage | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Same supply range allows either part to operate from common 3.3 V or 5 V rails without redesign. |
| Interface Type | SPI / QSPI / Microwire (serial) | SPI / QSPI / Microwire (serial) | Matching serial interfaces ensure the same microcontroller or DSP can drive either device with no firmware changes. |
| Package / Pin Count | 20-pin SSOP (DBQ) | 16-pin SSOP (DBQ) | Different pin counts and footprints mean the PCB layout must be redesigned; they are not drop-in replacements. |
| Input Type | Single-ended and differential | Single-ended and differential | Both support differential inputs, which improves noise rejection for low-level signals. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical industrial temperature range means both are suitable for the same environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7844N | ADS7841E/2K5G4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 200k | 200k |
| Number of Inputs | 4, 8 | 4 |
| Input Type | Differential, Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-S/H-ADC | MUX-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
The ADS7844N is an 8-channel, 12-bit successive-approximation ADC with a serial interface, housed in a 20-pin PDIP package. The ADS7841E/2K5G4 is a 4-channel, 12-bit successive-approximation ADC in a 16-pin SSOP package, supplied in tape-and-reel form (2K5). The ADS7844N provides twice the input channel count of the ADS7841E/2K5G4.
No. The ADS7844N uses a 20-pin PDIP package, while the ADS7841E/2K5G4 uses a 16-pin SSOP package. The differing pin counts and package footprints prevent direct pin-to-pin substitution without a PCB redesign.
Yes. Both are 12-bit successive-approximation register (SAR) ADCs. Both devices operate from a single 2.7 V to 5.25 V supply and feature a serial SPI/QSPI-compatible interface, making them suitable for similar precision measurement applications within their respective channel counts.
The ADS7844N offers 8 input channels that can be configured as single-ended or differential pairs. The ADS7841E/2K5G4 offers 4 input channels, also configurable as single-ended or differential. Designs requiring more than four analog inputs must use the ADS7844N or an external multiplexer.
No. Beyond the package and pin-count differences, the channel count differs (4 vs. 8). A drop-in replacement is not possible; the design would require a new PCB layout and verification that four channels satisfy the system requirements.
Both the ADS7844N and ADS7841E/2K5G4 operate from a single supply in the 2.7 V to 5.25 V range. Both support an external reference voltage (VREF) that sets the full-scale input range, and both feature a shutdown mode to reduce power consumption between conversions.
The ADS7844N is better suited for higher channel-count systems because it provides 8 input channels versus 4 on the ADS7841E/2K5G4. For compact designs with four or fewer analog inputs, the ADS7841E/2K5G4 offers a smaller 16-pin SSOP footprint and tape-and-reel packaging for automated assembly.