ADS1259IPWR
德州儀器
- Lifecycle
- Active
- Stock
- 6414 件
- Package
- TSSOP-20
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS1259IPWR 和 ADS1203IPWR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS1259IPWR and ADS1203IPWR are not functionally interchangeable. The ADS1259IPWR is a 24-bit delta-sigma ADC with an SPI interface and integrated PGA, while the ADS1203IPWR is a 16-bit delta-sigma modulator with a single-bit output stream. They differ in resolution, output interface, channel architecture, and package pinout, so the ADS1203IPWR cannot directly replace the ADS1259IPWR in existing designs without significant redesign.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1259IPWR | ADS1203IPWR | Why it matters |
|---|---|---|---|
| Resolution | 24 bit | 16 bit | Higher resolution enables finer measurement granularity; the 24-bit device suits precision DC sensing while the 16-bit device is adequate for motor control and isolated feedback. |
| Architecture | Delta-Sigma (low-noise, DC-focused) | Delta-Sigma modulator (current-output) | The ADS1259 integrates a full ADC with digital filter, while the ADS1203 is a modulator requiring external digital filtering, affecting system complexity and substitutability. |
| Output Interface | SPI (serial) | 1-bit modulator bitstream | Different output formats mean the host must support either SPI readout or a sinc/decimation filter, so they are not drop-in interchangeable. |
| Input Type | Differential (single channel) | Differential (single channel) | Both accept differential inputs, but the ADS1259 targets direct voltage sensing while the ADS1203 is typically used for isolated current sensing via shunt. |
| Data Rate / Sample Rate | Up to 2.5 kSPS (programmable) | Up to 10 MHz modulator clock | The ADS1259 offers programmable low-speed precision conversion, whereas the ADS1203's high modulator clock supports fast oversampling for control loops. |
| Supply Voltage | Analog 5 V, Digital 2.7–5.25 V | 5 V (single supply) | Supply requirements affect board-level compatibility; the ADS1259 needs a separate analog supply rail while the ADS1203 runs from a single 5 V rail. |
| Package | TSSOP-20 | TSSOP-16 | Different pin counts and footprints prevent direct PCB substitution without layout changes. |
| Typical Application | Precision industrial measurement, weigh scales, temperature/pressure sensing | Motor control, isolated current sensing, power monitoring | Target applications differ significantly, so functional substitutability is limited to cases where a modulator-based current-sense path can replace a precision ADC path. |
| Internal Reference | Yes (integrated reference) | No (external reference required) | An integrated reference simplifies precision designs; the ADS1203 requires an external reference, adding components and design effort. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1259IPWR | ADS1203IPWR |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 14k | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Single Supply |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 125°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 1 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
| Features | PGA | - |
The ADS1259IPWR is a 24-bit, 14.4-kSPS delta-sigma analog-to-digital converter with an integrated low-noise PGA, designed for precision DC and low-frequency measurements. The ADS1203IPWR is a 16-bit, 10-MHz clock delta-sigma modulator that outputs a 1-bit data stream for isolated or high-speed signal-chain applications requiring external digital filtering. They differ fundamentally in resolution, output format, and intended signal bandwidth.
No. Both devices are offered in a TSSOP-20 package (PW suffix), but their pin functions and internal architectures differ. The ADS1259IPWR provides a complete ADC with serial interface, reference, and PGA control pins, while the ADS1203IPWR provides modulator clock, data, and control pins. A direct PCB drop-in replacement is not supported without design changes.
The ADS1259IPWR offers 24-bit resolution with programmable data rates up to 14.4 kSPS. The ADS1203IPWR is a 16-bit delta-sigma modulator that produces a 1-bit output stream at a 10-MHz modulator clock, with effective resolution determined by the external digital filter and decimation ratio.
The ADS1203IPWR is typically preferred for isolated signal acquisition because its 1-bit modulator output can be transmitted across an isolation barrier with a single digital isolator channel, and filtering is performed on the isolated or non-isolated side. The ADS1259IPWR integrates the full ADC function and is intended for non-isolated precision measurement systems.
No. The ADS1259IPWR operates from an analog supply of 5 V (4.75 V to 5.25 V) and a digital supply of 2.7 V to 5.25 V. The ADS1203IPWR operates from a single 5-V supply (4.5 V to 5.5 V). Designers must verify supply rails against the respective datasheet before substitution.
The ADS1259IPWR provides a SPI-compatible serial interface for configuration and reading conversion results. The ADS1203IPWR provides a 1-bit modulator data output and a modulator clock input; the host or an external digital filter performs decimation and conversion to a multi-bit result.
No, not directly. The ADS1203IPWR lacks an integrated digital filter, PGA, and SPI result interface, and it provides only 16-bit modulator resolution versus the 24-bit ADC output of the ADS1259IPWR. Replacement would require adding an external digital filter, reworking the PCB, and revalidating accuracy, noise, and timing performance.