ADS1222IPWR vs ADS1222IPWRG4

對 ADS1222IPWR 和 ADS1222IPWRG4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1222IPWRG4 is a Pb-free/RoHS-compliant variant of the ADS1222IPWR and is functionally identical in silicon, package, and pinout. The two part numbers are interchangeable for form, fit, and function, with the G4 suffix denoting lead-free construction and environmental compliance rather than any change in electrical performance.

Package Type High match
Pin Configuration High match
Electrical Specifications High match
Environmental Compliance High match

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1222IPWR ADS1222IPWRG4 Why it matters
Resolution (bits) 24 24 Determines the smallest signal change the ADC can resolve; both parts offer identical 24-bit resolution, so measurement precision is equivalent.
Number of input channels 2 (differential) 2 (differential) Defines how many sensor signals can be connected; identical channel count means the same sensor topology can be used with either part.
Interface type SPI (serial) SPI (serial) The digital communication protocol must match the host microcontroller; both use SPI, so firmware and bus wiring remain compatible.
Supply voltage (analog) 2.7 V to 5.5 V 2.7 V to 5.5 V Determines compatibility with the system power rail; identical ranges allow the same supply design for either part.
Package / case TSSOP-16 TSSOP-16 Footprint and pinout must match for board-level interchangeability; identical packages allow drop-in replacement.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Defines the environmental envelope for reliable operation; identical ratings mean the same thermal design applies.
Data rate (max) 2 kSPS 2 kSPS Sets the maximum sampling throughput for the application; identical rates preserve timing and filter design.
Internal PGA gain range 1 to 128 1 to 128 Programmable gain allows small sensor signals to be amplified; identical gain ranges support the same low-level signal conditioning.
RoHS / lead-free status RoHS compliant RoHS compliant (G4 suffix denotes green/lead-free) Both are RoHS compliant; the G4 suffix explicitly identifies the green/lead-free variant, which matters for regulatory and manufacturing compliance documentation.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1222IPWR ADS1222IPWRG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 24 24
Sampling Rate(Per Second) 240 240
Number of Inputs 2 2
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration MUX-ADC MUX-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 5.5V 2.7V ~ 5.5V
Voltage - Supply, Digital 2.7V ~ 5.5V 2.7V ~ 5.5V
Features Temperature Sensor Temperature Sensor
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What is the difference between ADS1222IPWR and ADS1222IPWRG4?

The ADS1222IPWR and ADS1222IPWRG4 are functionally identical 24-bit delta-sigma analog-to-digital converters from Texas Instruments. The "G4" suffix denotes a Green/RoHS-compliant lead finish (NiPdAu) and green mold compound qualification, while the base ADS1222IPWR uses the standard lead finish. Both are supplied in the same TSSOP-16 (PW) package and are specified over the -40°C to +85°C industrial temperature range.

Are ADS1222IPWR and ADS1222IPWRG4 electrically and functionally interchangeable?

Yes. Both devices share the same silicon die, pinout, TSSOP-16 package, and datasheet electrical specifications (24-bit resolution, PGA, internal oscillator, SPI-compatible interface). The only documented difference is the RoHS/Green compliance designation of the G4 variant, so they are interchangeable in function and footprint.

What is the resolution and architecture of the ADS1222IPWR/ADS1222IPWRG4?

Both parts are 24-bit delta-sigma (ΔΣ) analog-to-digital converters with a programmable gain amplifier (PGA) and an on-chip oscillator, intended for precision low-frequency sensor and measurement applications. Refer to the TI ADS1222 datasheet for the exact gain settings, data rates, and noise specifications.

What package and pin count do these devices use?

Both ADS1222IPWR and ADS1222IPWRG4 are offered in the TSSOP-16 (PW) package with 16 pins. The "R" in the orderable part number indicates tape-and-reel packaging, and the "I" indicates the industrial temperature grade.

What supply voltage range do ADS1222IPWR and ADS1222IPWRG4 require?

Both variants operate from a single analog supply in the 2.7 V to 5.5 V range, with a separate digital supply (DVDD) in the same range, as specified in the TI ADS1222 datasheet. Always confirm the exact limits against the current manufacturer datasheet before design.

Does the G4 suffix affect the operating temperature range or reliability?

No. The G4 designation reflects RoHS/Green material compliance (lead-free NiPdAu finish and green mold compound) and does not change the specified operating temperature range of -40°C to +85°C or the device's electrical performance relative to the standard ADS1222IPWR.

Which variant should be selected for RoHS-restricted or green procurement programs?

The ADS1222IPWRG4 should be selected when RoHS compliance and green-material qualification are required by the procurement or regulatory program. The standard ADS1222IPWR may be used where the G4 designation is not mandated, but designers should verify the specific lead-finish and compliance documentation for their application.

Can ADS1222IPWR and ADS1222IPWRG4 be mixed on the same PCB assembly?

Yes. Because both share the identical TSSOP-16 footprint, pinout, and electrical specifications, either variant can be populated on the same PCB without layout changes. Mixing is acceptable provided the assembly's compliance requirements are satisfied by the specific variant used at each location.