ADS1222IPWR
德州儀器
- Lifecycle
- Active
- Stock
- 3095 件
- Package
- TSSOP-14
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS1222IPWR 和 ADS1203IPWRG4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS1222IPWR and ADS1203IPWRG4 are not drop-in replacements for one another. Although both are 24-bit delta-sigma analog-to-digital converters in TSSOP packages, they differ fundamentally in resolution architecture, output interface, channel configuration, and modulator clock requirements, so a direct board-level substitution is not feasible without redesign.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1222IPWR | ADS1203IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 16-bit device. |
| Architecture | Delta-Sigma (24-bit ADC) | Delta-Sigma modulator | The ADS1222 is a complete ADC with digital filter and interface, while the ADS1203 is a modulator-only device requiring external digital filtering, affecting system design and substitutability. |
| Output Interface | SPI (serial) | 1-bit modulator bitstream | The output format dictates how the host processor receives data; SPI provides ready-to-use conversion results, whereas a bitstream requires an external sinc filter. |
| Input Channels | 2 differential | 1 differential | Channel count determines how many signals can be measured; the ADS1222 supports two differential inputs while the ADS1203 supports only one. |
| Supply Voltage (analog) | 2.7 V to 5.5 V | 4.5 V to 5.5 V | The wider supply range of the ADS1222 allows operation at lower voltages, while the ADS1203 requires a nominal 5 V supply, affecting power-supply compatibility. |
| Package | TSSOP-16 | TSSOP-16 | Package footprint affects PCB layout and drop-in compatibility; both share the same TSSOP-16 footprint, easing board-level substitution. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range defines the environments in which the device can reliably operate; identical ranges mean equivalent environmental robustness. |
| Data Rate / Modulator Clock | Up to 2 kSPS (programmable) | Up to 10 MHz modulator clock | Throughput and clocking scheme differ significantly; the ADS1222 offers programmable output data rates while the ADS1203 relies on an external modulator clock, impacting system timing design. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1222IPWR | ADS1203IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 240 | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Single Supply |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 2 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | MUX-ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 2.7V ~ 5.5V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.5V | - |
| Features | Temperature Sensor | - |
The ADS1222IPWR is a 24-bit delta-sigma analog-to-digital converter with a two-channel differential input multiplexer, internal oscillator, and a programmable gain amplifier, housed in a TSSOP-16 package. The ADS1203IPWRG4 is a 16-bit delta-sigma modulator with a single differential input, designed for isolated signal acquisition when paired with an external digital filter, and is supplied in a TSSOP-8 package. The ADS1222 integrates a full ADC with digital filter, while the ADS1203 outputs a 1-bit modulator stream requiring external processing.
No. The ADS1222IPWR uses a TSSOP-16 package, whereas the ADS1203IPWRG4 uses a smaller TSSOP-8 package. The pin counts, pin functions, and PCB land patterns differ, so these devices are not drop-in replacements for each other.
The ADS1222IPWR provides 24-bit resolution and outputs fully processed digital codes via its serial interface after internal digital filtering. The ADS1203IPWRG4 is a 16-bit delta-sigma modulator that outputs a 1-bit serial bitstream at a high oversampling rate; the effective 16-bit resolution is achieved only after external digital filtering (e.g., in an FPGA or DSP).
Both devices operate from a single 5 V analog supply (AVDD = 5 V typical) with a separate digital supply (DVDD) that supports 2.7 V to 5.5 V logic interfaces, per their respective manufacturer datasheets. Designers should verify the exact recommended operating conditions in the latest datasheet revision before finalizing the supply design.
The ADS1203IPWRG4 is specifically intended for isolated signal acquisition: its modulator output can be routed across an isolation barrier to a digital filter, making it suitable for isolated shunt-based current sensing in motor drives and power inverters. The ADS1222IPWR integrates the digital filter and is better suited for non-isolated, general-purpose precision sensor measurement where a complete ADC solution is desired.
No. Beyond the package and pin-count differences, the ADS1203IPWRG4 requires an external digital filter to produce usable conversion results, whereas the ADS1222IPWR delivers filtered digital output directly. Substitution would require redesign of the signal chain, PCB layout, and firmware, and must be validated against the manufacturer datasheets.
The ADS1222IPWR features a two-channel differential input multiplexer, allowing selection between two differential input pairs. The ADS1203IPWRG4 has a single differential input pair. Designs requiring multiple input channels should account for this difference when selecting between the two parts.