AD8429BRZ
ADI公司
- Lifecycle
- Active
- Stock
- 6879 件
- Package
- SOIC-8
- Series
- 線性放大器-儀器、運算放大器、緩衝放大器
對 AD8429BRZ 和 AD8422ARZ 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD8422ARZ and AD8429BRZ are both precision instrumentation amplifiers in the same SOIC-8 package with identical pinout, making them a viable functional replacement candidate. However, the AD8429BRZ offers lower voltage noise and higher gain bandwidth, while the AD8422ARZ provides wider supply voltage range and lower power consumption. Designers should validate gain-setting resistor values, noise budget, and supply rails before substituting.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8422ARZ | AD8429BRZ | Why it matters |
|---|---|---|---|
| Number of Channels | 1 | 1 | Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent. |
| Gain Bandwidth Product (GBW) | 2.2 MHz | 15 MHz | Higher GBW allows the AD8429BRZ to handle wider signal bandwidths and faster settling, which is critical for high-speed or dynamic measurements. |
| Input Voltage Noise (1 kHz) | 8 nV/√Hz | 1 nV/√Hz | Lower input voltage noise improves signal-to-noise ratio for low-level signals; the AD8429BRZ is significantly quieter. |
| Input Offset Voltage (max) | 70 µV | 50 µV | Lower offset voltage reduces DC error at the output, improving accuracy in precision measurement applications. |
| Input Bias Current (max) | 1 nA | 150 nA | Lower bias current minimizes errors when interfacing with high-impedance sources; the AD8422ARZ is better suited for such sensors. |
| Common-Mode Rejection Ratio (CMRR, G=100) | 120 dB | 126 dB | Higher CMRR rejects common-mode interference more effectively, improving measurement accuracy in noisy environments. |
| Supply Voltage Range | ±2.3 V to ±18 V | ±4 V to ±18 V | The AD8422ARZ supports lower supply voltages, enabling use in low-power or battery-operated systems where the AD8429BRZ cannot operate. |
| Quiescent Supply Current (max) | 1.5 mA | 6.5 mA | Lower quiescent current reduces power consumption, making the AD8422ARZ preferable for power-sensitive designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +125 °C | The wider temperature range of the AD8429BRZ allows operation in harsher environments such as industrial or automotive applications. |
| Slew Rate | 0.8 V/µs | 22 V/µs | Higher slew rate enables faster response to transient signals and larger full-power bandwidth, important for dynamic measurements. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8429BRZ | AD8422ARZ |
|---|---|---|
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Slew Rate | 22V/µs | 0.8V/µs |
| -3 dB Bandwidth | 15 MHz | 2.2 MHz |
| Current - Input Bias | 150 nA | 500 pA |
| Voltage - Input Offset | 50 µV | 60 µV |
| Supply Current | 6.7mA | 300µA |
| Current - Output / Channel | 35 mA | 20 mA |
| Voltage - Supply Span(Min) | 8 V | 4.6 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Output Type | - | Rail-to-Rail |
The AD8422ARZ is a high precision, low power, low noise instrumentation amplifier with a gain range of 1 to 1000, typical input offset voltage of 25 µV, and supply current of 300 µA. The AD8429BRZ is an ultralow noise instrumentation amplifier with 1 nV/√Hz input voltage noise, gain range of 1 to 10000, and higher supply current. The AD8429BRZ is optimized for low noise applications, while the AD8422ARZ is optimized for low power and high precision.
Both devices are offered in 8-lead SOIC packages with the same pinout (gain resistor pins, -IN, +IN, V-, REF, VOUT, V+). However, designers must verify package dimensions and thermal characteristics against the respective datasheets before substituting one for the other on an existing PCB.
The AD8429BRZ has significantly lower input voltage noise at 1 nV/√Hz typical, compared to the AD8422ARZ which specifies approximately 8 nV/√Hz typical. The AD8429BRZ is therefore preferred for low-level signal amplification where noise floor is critical.
The AD8422ARZ draws a typical supply current of 300 µA, making it suitable for battery-powered and portable instrumentation. The AD8429BRZ draws a higher typical supply current of approximately 4.5 mA, reflecting its ultralow noise architecture. Designs prioritizing power efficiency should favor the AD8422ARZ.
The AD8422ARZ supports gains from 1 to 1000 set by a single external resistor. The AD8429BRZ supports gains from 1 to 10000 using a single external gain resistor. The wider gain range of the AD8429BRZ suits applications requiring higher amplification of very small signals.
The AD8422ARZ offers typical input offset voltage of 25 µV and low offset drift, along with high CMRR, making it well suited for precision DC measurement. The AD8429BRZ prioritizes low noise over DC offset, with a higher typical input offset voltage. For DC accuracy-critical designs, the AD8422ARZ is generally the better choice.
Both devices support dual-supply operation over a wide range. The AD8422ARZ operates from ±2.3 V to ±18 V (or 4.6 V to 36 V single supply), while the AD8429BRZ operates from ±4 V to ±18 V. Designs using supply voltages below ±4 V can use the AD8422ARZ but not the AD8429BRZ.
The AD8429BRZ is preferred in applications requiring ultralow input voltage noise, such as medical instrumentation, seismic sensing, and precision transducer signal conditioning where signal levels are very small. Its 1 nV/√Hz noise and gain up to 10000 make it suitable for extracting low-level signals from high-impedance sources.