AD8429BRZ vs AD8428ARZ-RL

對 AD8429BRZ 和 AD8428ARZ-RL 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8429BRZ and AD8428ARZ-RL are both precision low-noise instrumentation amplifiers from Analog Devices sharing the same SOIC-8 package and functionally similar architecture, making the AD8428ARZ-RL a viable functional replacement candidate for the AD8429BRZ in many low-noise signal conditioning applications. However, the two parts differ in gain configuration, bandwidth, and noise performance, so the designer must validate gain-setting requirements and AC performance against the target circuit before substituting.

Package Type High match
Amplifier Architecture High match
Gain Configuration Validation required
Noise and Bandwidth Validation required

Parts at a glance

Part A

AD8429BRZ

ADI公司

Lifecycle
Active
Stock
6879 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器
Part B

AD8428ARZ-RL

ADI公司

Lifecycle
Active
Stock
4871 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8429BRZ AD8428ARZ-RL Why it matters
Number of Channels 1 1 Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent.
Gain Range 1 to 10000 (set by external resistor) Fixed gain of 2000 AD8429 allows user-programmable gain via an external resistor, while AD8428 has a fixed gain of 2000, which fundamentally changes circuit design flexibility.
Input Voltage Noise (1 kHz) 1 nV/√Hz 1.3 nV/√Hz Lower input voltage noise improves signal-to-noise ratio for low-level sensor signals; AD8429 offers slightly better noise performance.
Bandwidth (at rated gain) 1.2 MHz (G=1) 3.5 MHz (G=2000) Bandwidth determines the maximum signal frequency the amplifier can handle; the comparison depends heavily on the configured gain.
Input Offset Voltage (max) 50 µV 30 µV Lower offset voltage reduces DC error at the output, which is important for precision measurement applications.
CMRR (G=1) 90 dB 130 dB (G=2000) Common-mode rejection ratio determines how well the amplifier rejects unwanted common-mode signals; higher CMRR improves measurement accuracy in noisy environments.
Supply Voltage Range ±4 V to ±18 V ±4 V to ±18 V Both support the same dual-supply range, so power supply compatibility is equivalent.
Supply Current (per amplifier) 6.5 mA 6.5 mA Similar quiescent current means comparable power consumption in the application.
Operating Temperature Range -40 °C to +125 °C -40 °C to +85 °C AD8429 supports a wider temperature range, making it suitable for harsher environments where AD8428 may not be rated.
Package 8-Lead SOIC 8-Lead SOIC Identical package and pinout allow drop-in replacement on the same PCB footprint.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8429BRZ AD8428ARZ-RL
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Slew Rate 22V/µs 50V/µs
-3 dB Bandwidth 15 MHz 3.5 MHz
Current - Input Bias 150 nA 200 nA
Voltage - Input Offset 50 µV 100 µV
Supply Current 6.7mA 6.5mA
Current - Output / Channel 35 mA 30 mA
Voltage - Supply Span(Min) 8 V 8 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8429BRZ and AD8428ARZ-RL instrumentation amplifiers?

The AD8429BRZ is a low-noise instrumentation amplifier with a gain range of 1 to 10,000, specified for a typical input voltage noise of 1 nV/√Hz at 1 kHz, and offered in an 8-lead SOIC package. The AD8428ARZ-RL is a fixed-gain instrumentation amplifier with a gain of 2000, featuring very low noise of 1.5 nV/√Hz at 1 kHz and a bandwidth of 3.5 MHz, supplied in an 8-lead SOIC package in tape-and-reel form. The AD8429BRZ provides user-selectable gain via an external resistor, while the AD8428ARZ-RL has a factory-set fixed gain of 2000.

Can the AD8429BRZ and AD8428ARZ-RL be used interchangeably in a design?

No, they are not directly interchangeable. The AD8429BRZ requires an external gain-setting resistor to set gain from 1 to 10,000, whereas the AD8428ARZ-RL has a fixed gain of 2000 and does not support external gain adjustment. Circuitry designed for one part's gain configuration and pin function must be revalidated before considering the other.

What is the input voltage noise specification for each device?

The AD8429BRZ specifies a typical input voltage noise of 1 nV/√Hz at 1 kHz. The AD8428ARZ-RL specifies a typical input voltage noise of 1.5 nV/√Hz at 1 kHz. Both are low-noise instrumentation amplifiers suitable for precision signal conditioning, but the AD8429BRZ offers slightly lower typical noise density.

What gain configurations do the AD8429BRZ and AD8428ARZ-RL support?

The AD8429BRZ supports a user-programmable gain from 1 to 10,000, set by a single external resistor between the RG pins. The AD8428ARZ-RL has a fixed gain of 2000 and does not provide external gain-setting pins for user adjustment. Designs requiring variable gain should use the AD8429BRZ, while fixed-gain-2000 applications may use the AD8428ARZ-RL.

What are the package and ordering differences between the AD8429BRZ and AD8428ARZ-RL?

Both devices are offered in an 8-lead SOIC package. The AD8429BRZ is supplied in standard tube or tray quantities depending on the distributor, while the AD8428ARZ-RL suffix indicates tape-and-reel packaging for automated assembly. The "BRZ" and "ARZ" suffixes also denote different temperature grades and performance specifications per the respective datasheets.

How do the bandwidth specifications compare between the AD8429BRZ and AD8428ARZ-RL?

The AD8428ARZ-RL provides a -3 dB bandwidth of 3.5 MHz at its fixed gain of 2000. The AD8429BRZ bandwidth depends on the selected gain; at a gain of 1000, the typical -3 dB bandwidth is approximately 80 kHz per the datasheet. Because the AD8429BRZ gain is user-selectable, bandwidth must be evaluated at the specific application gain.

Which device is better suited for very low-level signal amplification?

Both devices target low-level signal amplification. The AD8429BRZ offers lower typical input voltage noise (1 nV/√Hz) and flexible gain up to 10,000, making it suitable for a broad range of low-level sensors. The AD8428ARZ-RL, with fixed gain of 2000 and 1.5 nV/√Hz typical noise, is optimized for applications requiring a fixed high gain with wide bandwidth. Selection should be based on required gain flexibility, noise, and bandwidth for the specific application.