AD8429BRZ vs AD8422BRZ-RL

對 AD8429BRZ 和 AD8422BRZ-RL 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8429BRZ and AD8422BRZ-RL are both precision instrumentation amplifiers in the same SOIC-8 package with identical pinout, making them a viable functional replacement candidate. However, the AD8429BRZ offers substantially higher bandwidth and faster slew rate, while the AD8422BRZ-RL provides lower power consumption and wider supply range flexibility. Designers should validate gain-setting resistor values, noise performance, and dynamic response against their specific application requirements before substituting one for the other.

Package Type High match
Pin Configuration High match
Bandwidth Validation required
Supply Current Validation required

Parts at a glance

Part A

AD8429BRZ

ADI公司

Lifecycle
Active
Stock
6879 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器
Part B

AD8422BRZ-RL

ADI公司

Lifecycle
Active
Stock
7470 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8429BRZ AD8422BRZ-RL Why it matters
Number of Channels 1 1 Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent.
Gain Bandwidth Product (GBP) 15 MHz 2.2 MHz Higher GBP allows the AD8429 to maintain accurate gain at higher signal frequencies, affecting bandwidth-critical designs.
Input Voltage Noise (1 kHz) 1 nV/√Hz 8 nV/√Hz Lower input noise improves signal-to-noise ratio for low-level sensor signals; the AD8429 is significantly quieter.
Input Offset Voltage (max) 50 µV 70 µV Lower offset voltage reduces DC error at the output, important for precision measurement applications.
Supply Voltage Range ±4 V to ±18 V ±2.3 V to ±18 V The AD8422 supports lower supply voltages, enabling use in low-power or battery-operated systems where the AD8429 cannot operate.
Quiescent Supply Current 6.5 mA 0.3 mA The AD8422 draws far less current, making it preferable for power-sensitive designs; the AD8429 consumes more for higher bandwidth.
CMRR (G=1000, DC) 130 dB 120 dB Higher common-mode rejection suppresses interference; the AD8429 offers better rejection for high-gain precision measurements.
Operating Temperature Range -40 °C to +125 °C -40 °C to +85 °C The AD8429 supports higher ambient temperatures, making it suitable for harsher industrial environments.
Package 8-Lead SOIC 8-Lead SOIC Identical package and pinout allow drop-in board-level substitution without layout changes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8429BRZ AD8422BRZ-RL
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Output Type - Rail-to-Rail
Slew Rate 22V/µs 0.8V/µs
-3 dB Bandwidth 15 MHz 2.2 MHz
Current - Input Bias 150 nA 200 pA
Voltage - Input Offset 50 µV 25 µV
Supply Current 6.7mA 300µA
Current - Output / Channel 35 mA 20 mA
Voltage - Supply Span(Min) 8 V 4.6 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8429BRZ and AD8422BRZ-RL?

The AD8429BRZ is a low-noise instrumentation amplifier optimized for high gain and low noise (1 nV/√Hz at 1 kHz) with a gain range of 1 to 10,000, supplied in an 8-lead SOIC package. The AD8422BRZ-RL is a low-power, high-precision instrumentation amplifier with lower quiescent current (typically 300 µA) and wider supply range (±2.25 V to ±18 V), supplied in an 8-lead SOIC in tape-and-reel packaging. The AD8429 targets low-noise signal acquisition, while the AD8422 targets low-power precision applications.

Can the AD8429BRZ and AD8422BRZ-RL be used interchangeably in the same circuit?

No, they are not pin-for-pin or specification-equivalent substitutes. Although both are 8-lead SOIC instrumentation amplifiers, their gain-setting resistor formulas, noise performance, supply current, and bandwidth differ. A direct replacement requires revalidation of gain resistor values, noise budget, supply current, and stability against the manufacturer datasheets.

How do the noise specifications of the AD8429BRZ and AD8422BRZ-RL compare?

The AD8429BRZ is specified with an input voltage noise of approximately 1 nV/√Hz at 1 kHz, making it suitable for low-level signal amplification. The AD8422BRZ-RL has a higher input voltage noise, typically around 8 nV/√Hz at 1 kHz. Designs prioritizing lowest noise should select the AD8429BRZ, while the AD8422BRZ-RL trades noise for lower power consumption.

What are the supply voltage and quiescent current differences between the two parts?

The AD8429BRZ operates from a supply range of ±4 V to ±18 V with a typical quiescent current of about 4.5 mA. The AD8422BRZ-RL operates from ±2.25 V to ±18 V with a typical quiescent current of approximately 300 µA. The AD8422BRZ-RL is therefore better suited to low-power and battery-operated designs, while the AD8429BRZ is intended for higher-performance low-noise signal chains.

What gain ranges and gain-setting methods do the AD8429BRZ and AD8422BRZ-RL support?

Both devices use a single external gain resistor to set gain. The AD8429BRZ supports gains from 1 to 10,000, with gain determined by the formula G = 1 + (6 kΩ / RG). The AD8422BRZ-RL supports gains from 1 to 1,000, with gain determined by G = 1 + (19.8 kΩ / RG). The different internal resistor values mean gain resistors are not interchangeable between the two parts.

How do the bandwidth and slew rate of the AD8429BRZ and AD8422BRZ-RL differ?

The AD8429BRZ provides a bandwidth of approximately 1.2 MHz at G = 1 and a slew rate of about 22 V/µs. The AD8422BRZ-RL provides a bandwidth of approximately 2.2 MHz at G = 1 and a slew rate of about 0.8 V/µs. The AD8429BRZ offers higher slew rate for fast transient signals, while the AD8422BRZ-RL offers wider small-signal bandwidth at unity gain.

What packaging and ordering differences exist between the AD8429BRZ and AD8422BRZ-RL?

Both parts are offered in an 8-lead SOIC package. The AD8429BRZ is supplied in standard tube or tray quantities, while the AD8422BRZ-RL suffix indicates tape-and-reel packaging for automated assembly. The "BRZ" grade in both part numbers denotes the B-grade performance level in the SOIC package. Buyers should confirm reel size and moisture sensitivity level from the manufacturer datasheet before production ordering.

Which applications are best suited to the AD8429BRZ versus the AD8422BRZ-RL?

The AD8429BRZ is intended for low-noise precision signal acquisition such as medical instrumentation, seismic sensors, and low-level transducer amplification where 1 nV/√Hz noise and high gain are required. The AD8422BRZ-RL is intended for low-power precision applications such as portable medical devices, battery-powered sensors, and industrial process control where 300 µA quiescent current and wide supply range are prioritized over lowest noise.