圖片僅供參考
規格
| 屬性 | 價值 |
| Manufacturer | XLSEMI |
| Package | TO-252-5 |
| Voltage - Supply | 3.6V~32V |
| Function | Boost type |
| Number of Outputs | 1 |
| Topology | Boost |
| Operating Temperature | -40℃~+125℃ |
| Switch tube (built-in/external) | Built-in |
| Output Current | 3A |
| Frequency - Switching | 400kHz |
概述
Description
The XL6008E1 is a step-up (boost) DC-DC converter module based on the XL6008 chip. It efficiently increases input voltage (3–32V) to a higher, adjustable output (5–35V) with a maximum output current of 2A. Key features include:
- High efficiency (up to 94%) due to built-in MOSFET.
- Adjustable output via potentiometer.
- Wide input range, suitable for solar panels, batteries, etc.
- Overcurrent and thermal protection for safety.
Commonly used in LED drivers, power supplies, and battery charging, it’s compact and easy to integrate. Ensure proper heat dissipation at higher loads.
- High efficiency (up to 94%) due to built-in MOSFET.
- Adjustable output via potentiometer.
- Wide input range, suitable for solar panels, batteries, etc.
- Overcurrent and thermal protection for safety.
Commonly used in LED drivers, power supplies, and battery charging, it’s compact and easy to integrate. Ensure proper heat dissipation at higher loads.
Equivalent
The XL6008E1 is a step-up (boost) DC-DC converter. Equivalent alternatives include:
- LM2577 (Analog Devices)
- MC34063 (ON Semiconductor)
- MT3608 (Microchip)
- XL6009 (XLSEMI, higher current)
- LT1372 (Analog Devices, higher performance)
These chips offer similar boost conversion functionality but may vary in input/output ranges, efficiency, and current handling. Check datasheets for exact compatibility.
- LM2577 (Analog Devices)
- MC34063 (ON Semiconductor)
- MT3608 (Microchip)
- XL6009 (XLSEMI, higher current)
- LT1372 (Analog Devices, higher performance)
These chips offer similar boost conversion functionality but may vary in input/output ranges, efficiency, and current handling. Check datasheets for exact compatibility.
Pinout
The XL6008E1 is a 5-pin DC-DC boost converter IC with the following pin functions:
1. VIN – Input voltage (3V–32V).
2. GND – Ground reference.
3. FB – Feedback pin for output voltage regulation (adjustable via resistors).
4. EN – Enable control (high = on, low = off).
5. SW – Switching node (connects to inductor and diode).
It provides boost conversion with a 4A switch current and 400kHz switching frequency, supporting output voltages up to 60V.
1. VIN – Input voltage (3V–32V).
2. GND – Ground reference.
3. FB – Feedback pin for output voltage regulation (adjustable via resistors).
4. EN – Enable control (high = on, low = off).
5. SW – Switching node (connects to inductor and diode).
It provides boost conversion with a 4A switch current and 400kHz switching frequency, supporting output voltages up to 60V.
Manufacturer
The XL6008E1 is a DC-DC boost converter module, and its manufacturer is XLSEMI (XinLu Semiconductor).
XLSEMI is a Chinese semiconductor company specializing in power management ICs, including DC-DC converters, LED drivers, and voltage regulators. Known for cost-effective and reliable components, XLSEMI serves consumer electronics, automotive, and industrial applications.
The XL6008E1 is a step-up converter with a wide input voltage range (3V–32V) and adjustable output, commonly used in power supply designs.
XLSEMI is a Chinese semiconductor company specializing in power management ICs, including DC-DC converters, LED drivers, and voltage regulators. Known for cost-effective and reliable components, XLSEMI serves consumer electronics, automotive, and industrial applications.
The XL6008E1 is a step-up converter with a wide input voltage range (3V–32V) and adjustable output, commonly used in power supply designs.
Package
The XL6008E1 is a SOP-8 (Small Outline Package) DC-DC boost converter IC. It features a compact 8-pin surface-mount design, suitable for high-efficiency step-up voltage applications. The SOP-8 package is widely used for its balance of size and thermal performance.
