圖片僅供參考
規格
| 屬性 | 價值 |
| Manufacturer | XLSEMI |
| Package / Case | SOIC-8-150mil |
| Voltage - Supply | 3.6V~24V |
| Function | Boost type |
| Number of Outputs | 1 |
| Topology | Boost |
| Operating Temperature | -40℃~+125℃@(TJ) |
| Switch tube (built - in / external) | Built-in |
| Frequency - Switching | 400kHz |
概述
Description
The XL6007E1 is a step-up (boost) DC-DC converter module based on the XL6007 chip. It efficiently boosts input voltages (e.g., 3–32V) to higher outputs (up to 60V), with a max current of 4A and adjustable output voltage via a potentiometer.
### Key Features:
- Wide input range: 3–32V DC
- Adjustable output: 5–60V DC
- High efficiency: Up to 94%
- 4A max switch current
- Built-in over-temperature & over-current protection
### Applications:
- Powering LED arrays
- Solar panel systems
- Battery charging circuits
- Industrial equipment
### Pros:
- Compact, easy to use
- Stable performance under load
### Cons:
- Requires heat dissipation at high currents
- Output ripple may need filtering
Ideal for projects needing high-voltage boosting with moderate power demands. Always check datasheets for precise specs.
### Key Features:
- Wide input range: 3–32V DC
- Adjustable output: 5–60V DC
- High efficiency: Up to 94%
- 4A max switch current
- Built-in over-temperature & over-current protection
### Applications:
- Powering LED arrays
- Solar panel systems
- Battery charging circuits
- Industrial equipment
### Pros:
- Compact, easy to use
- Stable performance under load
### Cons:
- Requires heat dissipation at high currents
- Output ripple may need filtering
Ideal for projects needing high-voltage boosting with moderate power demands. Always check datasheets for precise specs.
Equivalent
The XL6007E1 is a step-up DC-DC converter. Equivalent or similar chips include:
- LM2577 (TI)
- MC34063 (ON Semiconductor)
- MT3608 (Microchip)
- XL6009 (XLSEMI, higher current)
- LT1370 (Analog Devices)
These offer comparable boost converter functionality, though specs like input/output range, current, and efficiency may vary. Check datasheets for exact replacements.
- LM2577 (TI)
- MC34063 (ON Semiconductor)
- MT3608 (Microchip)
- XL6009 (XLSEMI, higher current)
- LT1370 (Analog Devices)
These offer comparable boost converter functionality, though specs like input/output range, current, and efficiency may vary. Check datasheets for exact replacements.
Features
The XL6007E1 is a step-up (boost) DC-DC converter with the following key features:
- Input Voltage Range: 3.6V to 32V
- Adjustable Output Voltage: Up to 60V
- High Switching Frequency: 400kHz
- Maximum Output Current: 4A (depends on input/output voltage)
- High Efficiency: Up to 94%
- Built-in N-MOSFET Switch: Reduces external components
- Over-Temperature Protection (OTP)
- Soft-Start Function: Prevents inrush current
- Compact Package: TO-263-5L (DIP-8L optional)
Ideal for LED drivers, power supplies, and battery-powered applications.
- Input Voltage Range: 3.6V to 32V
- Adjustable Output Voltage: Up to 60V
- High Switching Frequency: 400kHz
- Maximum Output Current: 4A (depends on input/output voltage)
- High Efficiency: Up to 94%
- Built-in N-MOSFET Switch: Reduces external components
- Over-Temperature Protection (OTP)
- Soft-Start Function: Prevents inrush current
- Compact Package: TO-263-5L (DIP-8L optional)
Ideal for LED drivers, power supplies, and battery-powered applications.
Pinout
The XL6007E1 is a 5-pin DC-DC boost converter IC with the following pin functions:
1. VIN (Pin 1): Input voltage supply.
2. GND (Pin 2): Ground reference.
3. SW (Pin 3): Switching node connected to the internal MOSFET drain.
4. FB (Pin 4): Feedback pin for output voltage regulation (typically via a resistor divider).
5. EN (Pin 5): Enable pin (high = active, low = shutdown).
It operates as a step-up (boost) converter, supporting input voltages up to 32V and adjustable output voltages. The SW pin drives an external inductor, while FB ensures stable regulation. The EN pin allows power control.
1. VIN (Pin 1): Input voltage supply.
2. GND (Pin 2): Ground reference.
3. SW (Pin 3): Switching node connected to the internal MOSFET drain.
4. FB (Pin 4): Feedback pin for output voltage regulation (typically via a resistor divider).
5. EN (Pin 5): Enable pin (high = active, low = shutdown).
It operates as a step-up (boost) converter, supporting input voltages up to 32V and adjustable output voltages. The SW pin drives an external inductor, while FB ensures stable regulation. The EN pin allows power control.
Package
The XL6007E1 is a step-up (boost) DC-DC converter IC. It typically comes in a TO-263-5L (D2PAK-5L) package, which is a surface-mount, 5-pin power package with a heat-dissipating tab. This package is suitable for high-efficiency power applications.
