規格
| 屬性 | 價值 |
| Supplier | STMicroelectronics |
| Package | Tube |
| ProductStatus | Active |
| IGBTType | Trench Field Stop |
| Voltage-CollectorEmitterBreakdown(Max) | 650 V |
| Current-Collector(Ic)(Max) | 60 A |
| Current-CollectorPulsed(Icm) | 120 A |
| Vce(on)(Max)@VgeIc | 2V @ 15V, 30A |
| Power-Max | 258 W |
| SwitchingEnergy | 300µJ (on), 960µJ (off) |
| InputType | Standard |
| GateCharge | 80 nC |
| Td(on/off)@25°C | 31.6ns/115ns |
| TestCondition | 400V, 30A, 10Ohm, 15V |
| ReverseRecoveryTime(trr) | 140 ns |
| OperatingTemperature | -55°C ~ 175°C (TJ) |
| MountingType | Through Hole |
| Package/Case | TO-247-3 |
概述
Description
STGWA30M65DF2 is a dual IGBT power module from STMicroelectronics’ STGWA family. It houses two high‑current IGBTs with antiparallel diodes in a single DF2 package, designed for medium‑voltage power conversion and motor‑drive stages.
Key points:
- Ratings (typical): around 650 V blocking, ~30 A continuous current per module (values can vary; check datasheet)
- Packaging: DF2 module for compact mounting and good thermal performance
- Applications: motor drives, inverters, solar/ UPS power stages, DC‑DC converters
- Configuration: suitable for half‑ or full‑bridge topologies
Note: exact electrical characteristics (Vces, Ic, switching losses, protection features, and pinout) vary by lot and packaging. For precise specs, consult the STMicroelectronics datasheet and product page.
Key points:
- Ratings (typical): around 650 V blocking, ~30 A continuous current per module (values can vary; check datasheet)
- Packaging: DF2 module for compact mounting and good thermal performance
- Applications: motor drives, inverters, solar/ UPS power stages, DC‑DC converters
- Configuration: suitable for half‑ or full‑bridge topologies
Note: exact electrical characteristics (Vces, Ic, switching losses, protection features, and pinout) vary by lot and packaging. For precise specs, consult the STMicroelectronics datasheet and product page.
Features
Here are concise features for STGWA30M65DF2:
- Type: 650 V dual IGBT module with anti-parallel diodes (2 IGBTs and 2 diodes in one package)
- Voltage rating: 650 V
- Current rating: 30 A continuous per switch
- Configuration: Dual IGBT with common-emitter arrangement for easy bridge designs
- Switching performance: Fast switching, optimized for high-efficiency in inverter/motor-drive applications
- Package/thermal: Power module with integrated heat-dissipation capabilities for reliable operation
- Protection/robustness: Designed for rugged industrial/automotive applications requiring good short-circuit tolerance
- Applications: Three-phase motor drives, power inverters, solar/inverter systems, UPS, and general high-power switching
- Compliance: RoHS-compliant (typical for ST modules)
Note: For exact electrical specs (di/dt, dv/dt, switching losses, isolation ratings, and footprint), refer to the official datasheet.
- Type: 650 V dual IGBT module with anti-parallel diodes (2 IGBTs and 2 diodes in one package)
- Voltage rating: 650 V
- Current rating: 30 A continuous per switch
- Configuration: Dual IGBT with common-emitter arrangement for easy bridge designs
- Switching performance: Fast switching, optimized for high-efficiency in inverter/motor-drive applications
- Package/thermal: Power module with integrated heat-dissipation capabilities for reliable operation
- Protection/robustness: Designed for rugged industrial/automotive applications requiring good short-circuit tolerance
- Applications: Three-phase motor drives, power inverters, solar/inverter systems, UPS, and general high-power switching
- Compliance: RoHS-compliant (typical for ST modules)
Note: For exact electrical specs (di/dt, dv/dt, switching losses, isolation ratings, and footprint), refer to the official datasheet.
Pinout
STGWA30M65DF2 is a 3‑pin power MOSFET. The pins and their functions are:
- Gate (G): input control terminal to turn the device on/off.
- Drain (D): main current input/output (usually connected to the package/tab/heat sink).
- Source (S): main current output/input (reference/return).
Note: the metal mounting tab/heat sink is typically tied to the Drain.
- Gate (G): input control terminal to turn the device on/off.
- Drain (D): main current input/output (usually connected to the package/tab/heat sink).
- Source (S): main current output/input (reference/return).
Note: the metal mounting tab/heat sink is typically tied to the Drain.
Manufacturer
Manufacturer: STMicroelectronics (STMicroelectronics N.V.), a multinational electronics and semiconductor company.
What kind of company: One of the world’s largest semiconductor manufacturers, designing and producing a broad range of devices (microcontrollers, sensors, analog ICs, power semiconductors, etc.) for automotive, industrial, consumer, and communications markets.
What kind of company: One of the world’s largest semiconductor manufacturers, designing and producing a broad range of devices (microcontrollers, sensors, analog ICs, power semiconductors, etc.) for automotive, industrial, consumer, and communications markets.
Application
Typical applications for STGWA30M65DF2:
- Inverters for solar and renewable energy systems
- Three-phase and DC motor drives (industrial machinery, HVAC, pumps)
- Switch-mode power supplies and uninterruptible power supplies (UPS)
- Welding equipment and induction heating power stages
- Power conditioning and energy-storage interfaces
Note: 650 V / 30 A IGBT suitable for high-efficiency high-voltage switching in compact power electronics.
- Inverters for solar and renewable energy systems
- Three-phase and DC motor drives (industrial machinery, HVAC, pumps)
- Switch-mode power supplies and uninterruptible power supplies (UPS)
- Welding equipment and induction heating power stages
- Power conditioning and energy-storage interfaces
Note: 650 V / 30 A IGBT suitable for high-efficiency high-voltage switching in compact power electronics.
Package
STGWA30M65DF2 is supplied in the DPAK (TO-252) surface-mount package; the suffix "DF2" denotes that SMD package variant.
