規格
| 屬性 | 價值 |
| Package / Case | Tray,Tray,Tray |
| Series | FL-S |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 128Mb (16M x 8) |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 133 MHz |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
概述
Description
The S25FL128SAGMFI000 is a serial NOR Flash memory device manufactured by Infineon Technologies, part of their FL-S series. It offers a storage capacity of 128 megabits (16 megabytes) and is designed for high-performance, low-power applications. This memory device features a Serial Peripheral Interface (SPI), which allows for efficient communication and data transfer, making it suitable for embedded systems, consumer electronics, and industrial applications.
Key features include support for single, dual, and quad SPI modes, which enhance data throughput. It also offers fast read and write speeds, providing efficient data management. The device supports advanced security features such as hardware-based sector protection and a unique 64-bit device ID, ensuring data integrity and protection against unauthorized access. It operates within a wide temperature range, making it adaptable for various environmental conditions.
The S25FL128SAGMFI000 is housed in a compact, space-saving package, enabling efficient use in constrained spaces. Its reliability and performance make it a popular choice for applications requiring non-volatile memory storage.
Key features include support for single, dual, and quad SPI modes, which enhance data throughput. It also offers fast read and write speeds, providing efficient data management. The device supports advanced security features such as hardware-based sector protection and a unique 64-bit device ID, ensuring data integrity and protection against unauthorized access. It operates within a wide temperature range, making it adaptable for various environmental conditions.
The S25FL128SAGMFI000 is housed in a compact, space-saving package, enabling efficient use in constrained spaces. Its reliability and performance make it a popular choice for applications requiring non-volatile memory storage.
Equivalent
The S25FL128SAGMFI000 is a 128 Mb SPI NOR flash memory chip manufactured by Cypress Semiconductor, now part of Infineon Technologies. Equivalent products would include similar 128 Mb SPI NOR flash chips from other manufacturers, such as:
1. Micron's MT25QL128 series
2. Winbond's W25Q128 series
3. Macronix's MX25L128 series
4. ISSI's IS25LP128 series
These chips generally offer comparable functionalities like similar storage capacity, voltage range, and interface. Always verify specific features and compatibility based on your application requirements.
1. Micron's MT25QL128 series
2. Winbond's W25Q128 series
3. Macronix's MX25L128 series
4. ISSI's IS25LP128 series
These chips generally offer comparable functionalities like similar storage capacity, voltage range, and interface. Always verify specific features and compatibility based on your application requirements.
Features
The S25FL128SAGMFI000 is a serial NOR Flash memory device manufactured by Cypress Semiconductor. It offers a storage capacity of 128 megabits (16 megabytes) and is organized in a single-bit serial input/output mode. Key features include:
1. Memory Architecture: It supports a uniform 256-byte programming page size and a 64/256 KB sector architecture.
2. Interface: It uses a Serial Peripheral Interface (SPI) for communication, supporting Single, Dual, and Quad SPI modes for enhanced performance.
3. Speed: The device offers fast read performance, with a maximum clock frequency of up to 104 MHz in Single/Dual mode and up to 80 MHz in Quad mode.
4. Voltage Range: It operates within a voltage range of 2.7V to 3.6V.
5. Security: Hardware protection features include block protection, a write protection pin, and a 64-bit unique identifier.
6. Endurance: It offers high endurance with up to 100,000 program/erase cycles per sector.
7. Temperature Range: Suitable for industrial applications, it operates in a temperature range from -40°C to +85°C.
These features make it well-suited for a variety of applications, including consumer electronics and industrial systems.
1. Memory Architecture: It supports a uniform 256-byte programming page size and a 64/256 KB sector architecture.
2. Interface: It uses a Serial Peripheral Interface (SPI) for communication, supporting Single, Dual, and Quad SPI modes for enhanced performance.
3. Speed: The device offers fast read performance, with a maximum clock frequency of up to 104 MHz in Single/Dual mode and up to 80 MHz in Quad mode.
4. Voltage Range: It operates within a voltage range of 2.7V to 3.6V.
5. Security: Hardware protection features include block protection, a write protection pin, and a 64-bit unique identifier.
6. Endurance: It offers high endurance with up to 100,000 program/erase cycles per sector.
7. Temperature Range: Suitable for industrial applications, it operates in a temperature range from -40°C to +85°C.
These features make it well-suited for a variety of applications, including consumer electronics and industrial systems.
Pinout
The S25FL128SAGMFI000 is a member of the Cypress (now part of Infineon) NOR Flash memory family. It typically features an 8-pin layout, although the exact pin count can vary depending on the package type (e.g., SOIC, WSON). The primary functions of these pins include:
1. CS# (Chip Select): Initiates communication with the device.
2. SO/SIO1 (Serial Output/IO Pin 1): Data output in standard SPI mode and an I/O pin in quad mode.
3. WP#/SIO2 (Write Protect/IO Pin 2): Protects sectors from being modified or serves as an I/O pin.
4. VSS (Ground): Ground reference for device.
5. SI/SIO0 (Serial Input/IO Pin 0): Data input in standard SPI mode and an I/O pin in quad mode.
6. SCK (Serial Clock): Provides the timing for data transactions.
7. HOLD#/SIO3 (Hold/IO Pin 3): Pauses serial communications or serves as an I/O pin.
8. VCC (Power Supply): Supplies power to the device.
These pins allow the flash memory to interface with microcontrollers and other devices over a Serial Peripheral Interface (SPI), supporting standard, dual, and quad SPI modes for flexible and high-speed operations.
1. CS# (Chip Select): Initiates communication with the device.
2. SO/SIO1 (Serial Output/IO Pin 1): Data output in standard SPI mode and an I/O pin in quad mode.
3. WP#/SIO2 (Write Protect/IO Pin 2): Protects sectors from being modified or serves as an I/O pin.
4. VSS (Ground): Ground reference for device.
5. SI/SIO0 (Serial Input/IO Pin 0): Data input in standard SPI mode and an I/O pin in quad mode.
6. SCK (Serial Clock): Provides the timing for data transactions.
7. HOLD#/SIO3 (Hold/IO Pin 3): Pauses serial communications or serves as an I/O pin.
8. VCC (Power Supply): Supplies power to the device.
These pins allow the flash memory to interface with microcontrollers and other devices over a Serial Peripheral Interface (SPI), supporting standard, dual, and quad SPI modes for flexible and high-speed operations.
Manufacturer
The S25FL128SAGMFI000 is manufactured by Cypress Semiconductor Corporation. Cypress Semiconductor is a company that specializes in designing and manufacturing semiconductor products, including NOR flash memory, F-RAM, and SRAM. It is known for producing a wide range of integrated circuits that are used in automotive, industrial, consumer electronics, and communication applications. Cypress was acquired by Infineon Technologies in 2020, which is a leading German semiconductor manufacturer.
Application
The S25FL128SAGMFI000 is a 128 Mbit serial NOR flash memory commonly used in applications requiring reliable, non-volatile storage. It is suitable for use in consumer electronics, such as TVs and set-top boxes, where firmware and software storage is essential. In the automotive industry, it can be used for in-car entertainment systems and advanced driver-assistance systems (ADAS). It is also applicable in industrial automation for programmable logic controllers (PLCs) and human-machine interfaces (HMIs) due to its robust performance in various environments. Additionally, it is used in networking and telecommunications equipment for firmware storage and system configuration.
Package
The S25FL128SAGMFI000 is a serial NOR flash memory device from Cypress Semiconductor, part of the S25FL128S series. It typically comes in an 8-lead SOIC (Small Outline Integrated Circuit) package, which is compact and suitable for surface mounting on PCBs.