規格
| 屬性 | 價值 |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | F-RAM™ |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | FRAM |
| Technology | FRAM (Ferroelectric RAM) |
| MemorySize | 16Kb (2K x 8) |
| MemoryInterface | I²C |
| ClockFrequency | 1 MHz |
| AccessTime | 550 ns |
| Voltage-Supply | 2.7V ~ 3.65V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
概述
Description
The FM24CL16B-GTR is a non-volatile ferroelectric random-access memory (FRAM) device. It is designed for use in applications requiring high reliability and endurance for data retention. The device features a 16 Kbit memory organized as 2,048 x 8 bits, and it operates with a wide voltage range from 2.7V to 5.5V. The FM24CL16B-GTR offers fast write speeds and virtually unlimited read/write cycles, making it ideal for applications that need frequent and rapid data updates.
This FRAM device connects via an I2C interface, allowing easy integration into microcontroller-based systems. It is often preferred in environments that require low power consumption and robust performance under varying conditions. The FM24CL16B-GTR is suited for use in industrial control systems, medical devices, and consumer electronics, where data integrity and endurance are critical. It is available in a small, surface-mount package, enhancing its applicability in compact and portable devices.
This FRAM device connects via an I2C interface, allowing easy integration into microcontroller-based systems. It is often preferred in environments that require low power consumption and robust performance under varying conditions. The FM24CL16B-GTR is suited for use in industrial control systems, medical devices, and consumer electronics, where data integrity and endurance are critical. It is available in a small, surface-mount package, enhancing its applicability in compact and portable devices.
Equivalent
The FM24CL16B-GTR is a 16Kb FRAM memory chip. Equivalent products include:
1. Cypress FM24CL16B-G (similar FRAM technology and capacity).
2. Fujitsu MB85RC16 (also a 16Kb FRAM).
3. Adesto Technologies AT24C16 (an EEPROM with similar capacity, though with different technology).
4. Microchip 24AA16/24LC16B (EEPROM with comparable capacity).
These alternatives vary by technology, with FRAM offering faster writes and better endurance compared to EEPROM.
1. Cypress FM24CL16B-G (similar FRAM technology and capacity).
2. Fujitsu MB85RC16 (also a 16Kb FRAM).
3. Adesto Technologies AT24C16 (an EEPROM with similar capacity, though with different technology).
4. Microchip 24AA16/24LC16B (EEPROM with comparable capacity).
These alternatives vary by technology, with FRAM offering faster writes and better endurance compared to EEPROM.
Features
The FM24CL16B-GTR is a 16-Kbit I2C F-RAM (Ferroelectric Random Access Memory) device. Key features include:
1. Non-Volatile Memory: Retains data without a power supply.
2. High Endurance: Supports virtually unlimited read/write cycles, far exceeding EEPROM.
3. Fast Write Speed: No delay between write cycles, with no write delay or write buffer required.
4. Low Power Consumption: Operates efficiently across a wide voltage range (1.8V to 3.6V).
5. I2C Interface: Supports standard (100 kHz) and fast (400 kHz) I2C protocol speeds.
6. Standby and Active Modes: Low standby current and active current make it power efficient.
7. Data Integrity: 100 years of data retention, ensuring reliability.
8. Small Form Factor: Available in an 8-pin TDFN package suitable for space-constrained applications.
9. Extended Temperature Range: Operates effectively from -40°C to +85°C, suitable for industrial applications.
These features make the FM24CL16B-GTR ideal for applications requiring high-reliability non-volatile memory with fast data writing capabilities.
1. Non-Volatile Memory: Retains data without a power supply.
2. High Endurance: Supports virtually unlimited read/write cycles, far exceeding EEPROM.
3. Fast Write Speed: No delay between write cycles, with no write delay or write buffer required.
4. Low Power Consumption: Operates efficiently across a wide voltage range (1.8V to 3.6V).
5. I2C Interface: Supports standard (100 kHz) and fast (400 kHz) I2C protocol speeds.
6. Standby and Active Modes: Low standby current and active current make it power efficient.
7. Data Integrity: 100 years of data retention, ensuring reliability.
8. Small Form Factor: Available in an 8-pin TDFN package suitable for space-constrained applications.
9. Extended Temperature Range: Operates effectively from -40°C to +85°C, suitable for industrial applications.
These features make the FM24CL16B-GTR ideal for applications requiring high-reliability non-volatile memory with fast data writing capabilities.
Pinout
The FM24CL16B-GTR is a 16-Kbit FRAM (Ferroelectric Random Access Memory) device. It comes in an 8-pin package. The pin functions for this FRAM are as follows:
1. VDD: Power supply pin.
2. VSS: Ground pin.
3. SDA: Serial Data, an open-drain I/O line for data transfer.
4. SCL: Serial Clock Input, used to synchronize data movement on the serial interface.
5. WP: Write Protect, used to protect the memory from being written.
6. A0, A1, A2: Device Address inputs, used for device selection by the I2C master device.
These pins are designed for interfacing the FM24CL16B-GTR with a microcontroller or processor to perform read and write operations over an I2C bus. The device is typically used in applications requiring high endurance and low power non-volatile memory.
1. VDD: Power supply pin.
2. VSS: Ground pin.
3. SDA: Serial Data, an open-drain I/O line for data transfer.
4. SCL: Serial Clock Input, used to synchronize data movement on the serial interface.
5. WP: Write Protect, used to protect the memory from being written.
6. A0, A1, A2: Device Address inputs, used for device selection by the I2C master device.
These pins are designed for interfacing the FM24CL16B-GTR with a microcontroller or processor to perform read and write operations over an I2C bus. The device is typically used in applications requiring high endurance and low power non-volatile memory.
Manufacturer
The FM24CL16B-GTR is manufactured by Cypress Semiconductor Corporation. Cypress Semiconductor is a company that specializes in the design and manufacturing of semiconductor products, including memory chips, microcontrollers, sensors, and connectivity solutions. The company serves various industries, including automotive, industrial, consumer electronics, and the Internet of Things (IoT). Cypress is known for its innovative solutions in the semiconductor industry, particularly in areas such as programmable system-on-chip (PSoC) products and non-volatile memory technologies. In 2020, Cypress Semiconductor was acquired by Infineon Technologies AG, a German semiconductor company, further expanding its capabilities and market reach.
Application
The FM24CL16B-GTR is a 16Kb ferroelectric RAM (FRAM) chip. Its key application areas include:
1. Data Logging: Used in applications requiring frequent data writes, such as industrial control systems and medical devices.
2. Configurations Storage: Stores configuration settings in consumer electronics and automotive systems.
3. Wearable Devices: Ideal for storing sensor data due to its low power consumption and fast write speeds.
4. IoT Devices: Suitable for edge devices requiring non-volatile memory for occasional data writes.
5. Real-Time Systems: Useful in applications needing quick data integrity, such as point-of-sale terminals and smart meters.
These applications benefit from FRAM's fast write speeds, high endurance, and low power consumption.
1. Data Logging: Used in applications requiring frequent data writes, such as industrial control systems and medical devices.
2. Configurations Storage: Stores configuration settings in consumer electronics and automotive systems.
3. Wearable Devices: Ideal for storing sensor data due to its low power consumption and fast write speeds.
4. IoT Devices: Suitable for edge devices requiring non-volatile memory for occasional data writes.
5. Real-Time Systems: Useful in applications needing quick data integrity, such as point-of-sale terminals and smart meters.
These applications benefit from FRAM's fast write speeds, high endurance, and low power consumption.
Package
The FM24CL16B-GTR is typically available in an 8-pin SOIC (Small Outline Integrated Circuit) package. This package type is common for memory ICs, facilitating surface-mount technology (SMT) applications.
