規格
| 屬性 | 價值 |
| Package | Tube |
| Series | LPC80xM |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M0+ |
| CoreSize | 32-Bit Single-Core |
| Connectivity | I²C, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| NumberofI/O | 13 |
| ProgramMemoryType | FLASH |
| Voltage-Supply(Vcc/Vdd) | 1.71V ~ 3.6V |
| DataConverters | A/D 12x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 105°C (TA) |
| MountingType | Surface Mount |
概述
Description
The LPC802M001JDH16 is an ultra-low-power, 32-bit ARM Cortex-M0+ microcontroller from NXP's LPC800 series. Key features include:
- Core: 16 MHz Cortex-M0+ with 16 KB Flash, 4 KB SRAM
- Peripherals: I²C, SPI, USART, GPIO, 12-bit ADC, analog comparator
- Power: Low-power modes (Sleep, Deep-sleep, Power-down)
- Package: 16-pin TSSOP
Ideal for cost-sensitive, low-power embedded applications like sensors, consumer electronics, and IoT edge devices. Its small footprint and minimal BOM make it suitable for space-constrained designs.
For detailed specs, refer to NXP's datasheet.
- Core: 16 MHz Cortex-M0+ with 16 KB Flash, 4 KB SRAM
- Peripherals: I²C, SPI, USART, GPIO, 12-bit ADC, analog comparator
- Power: Low-power modes (Sleep, Deep-sleep, Power-down)
- Package: 16-pin TSSOP
Ideal for cost-sensitive, low-power embedded applications like sensors, consumer electronics, and IoT edge devices. Its small footprint and minimal BOM make it suitable for space-constrained designs.
For detailed specs, refer to NXP's datasheet.
Equivalent
The LPC802M001JDH16 (NXP) is an 8-bit microcontroller. Equivalent alternatives include:
- STM8S001J3M3 (STMicroelectronics)
- ATtiny202 (Microchip)
- EFM8BB10F8G-A-QFN20 (Silicon Labs)
These offer similar 8-bit performance, low power, and small form factors. Check pin compatibility and peripherals for exact replacements.
- STM8S001J3M3 (STMicroelectronics)
- ATtiny202 (Microchip)
- EFM8BB10F8G-A-QFN20 (Silicon Labs)
These offer similar 8-bit performance, low power, and small form factors. Check pin compatibility and peripherals for exact replacements.
Pinout
The LPC802M001JDH16 is an 8-bit microcontroller from NXP's LPC800 series in a TSSOP-16 package.
- Pin Count: 16 pins
- Key Functions:
- GPIO: 13 general-purpose I/O pins (some multiplexed).
- Communication: Supports I²C, SPI, and USART via SWM (Switch Matrix).
- Analog: 1x 12-bit ADC input.
- Timers: 2x 16-bit timers (SCTimer/PWM, MR Timer).
- Power: VDD (1.8–3.6V), VSS (GND).
- Debug: SWD (Serial Wire Debug) support.
It features an Arm Cortex-M0+ core (8 MHz) with 8KB Flash and 2KB SRAM. The Switch Matrix allows flexible peripheral pin mapping.
- Pin Count: 16 pins
- Key Functions:
- GPIO: 13 general-purpose I/O pins (some multiplexed).
- Communication: Supports I²C, SPI, and USART via SWM (Switch Matrix).
- Analog: 1x 12-bit ADC input.
- Timers: 2x 16-bit timers (SCTimer/PWM, MR Timer).
- Power: VDD (1.8–3.6V), VSS (GND).
- Debug: SWD (Serial Wire Debug) support.
It features an Arm Cortex-M0+ core (8 MHz) with 8KB Flash and 2KB SRAM. The Switch Matrix allows flexible peripheral pin mapping.
Application
The LPC802M001JDH16, an 8-bit microcontroller from NXP, is ideal for cost-sensitive, low-power applications. Key areas include:
- Consumer Electronics: Remote controls, smart home devices.
- Industrial: Sensors, motor control, simple automation.
- IoT: Edge nodes, wearable devices.
- Automotive: Basic control modules (non-safety-critical).
- HMI: Buttons, touch interfaces.
Its small footprint (TSSOP-16), low power, and ARM Cortex-M0+ core make it suitable for embedded systems requiring minimal processing.
- Consumer Electronics: Remote controls, smart home devices.
- Industrial: Sensors, motor control, simple automation.
- IoT: Edge nodes, wearable devices.
- Automotive: Basic control modules (non-safety-critical).
- HMI: Buttons, touch interfaces.
Its small footprint (TSSOP-16), low power, and ARM Cortex-M0+ core make it suitable for embedded systems requiring minimal processing.
Package
The LPC802M001JDH16 is a 16-pin TSSOP (Thin Shrink Small Outline Package) microcontroller from NXP. It features a compact design with a 4.4mm x 5mm footprint, suitable for space-constrained applications. The package type is TSSOP-16, offering surface-mount compatibility and reliable performance for embedded systems.
