規格
| 屬性 | 價值 |
| Package / Case | Tube |
| Series | QFET® |
| Part Status | Obsolete |
| FET Type | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 500 V |
| Current - Continuous Drain(Id) @ 25°C | 40A (Tc) |
| Drive Voltage(Max Rds On Min Rds On) | 10V |
| Rds On(Max) @ Id Vgs | 110mOhm @ 20A, 10V |
| Vgs(th)(Max) @ Id | 5V @ 250µA |
| Gate Charge(Qg)(Max) @ Vgs | 200 nC @ 10 V |
| Vgs(Max) | ±30V |
| Input Capacitance(Ciss)(Max) @ Vds | 7500 pF @ 25 V |
| Power Dissipation (Max) | 460W (Tc) |
| Operating Temperature | -55°C ~ 150°C (TJ) |
| Mounting Type | Through Hole |
| Supplier Device Package | TO-264-3 |
概述
Description
FQL40N50 is a specific model of an Insulated Gate Bipolar Transistor (IGBT). IGBTs are semiconductor devices used primarily in power electronics to switch and control electrical power efficiently. The "FQL" typically refers to the series or family of the device, while "40N50" indicates the specific characteristics of the transistor, such as its current and voltage ratings.
The "40" in "40N50" usually signifies the maximum current rating in amperes, while the "50" represents the maximum voltage rating in hundred volts, suggesting a 500V capability. IGBTs like the FQL40N50 are commonly used in applications such as motor drives, inverters, and power supplies because they combine the high-current and low-saturation-voltage capability of bipolar transistors with the high input impedance and fast switching of MOSFETs.
Renowned for their efficiency and reliability, these components are essential in modern power electronics, enabling the design of compact and efficient circuits. When selecting an IGBT, it's crucial to consider the specific electrical and thermal requirements of your application.
The "40" in "40N50" usually signifies the maximum current rating in amperes, while the "50" represents the maximum voltage rating in hundred volts, suggesting a 500V capability. IGBTs like the FQL40N50 are commonly used in applications such as motor drives, inverters, and power supplies because they combine the high-current and low-saturation-voltage capability of bipolar transistors with the high input impedance and fast switching of MOSFETs.
Renowned for their efficiency and reliability, these components are essential in modern power electronics, enabling the design of compact and efficient circuits. When selecting an IGBT, it's crucial to consider the specific electrical and thermal requirements of your application.
Equivalent
The FQL40N50 is a 500V, 40A N-channel MOSFET. Equivalent products with similar specifications include:
1. IRFP460 by International Rectifier
2. STW40NM50 by STMicroelectronics
3. IXFH50N50 by IXYS
4. APT40M50J by Microsemi
Ensure to check the datasheets for exact matching of parameters such as threshold voltage, Rds(on), and package type before substituting.
1. IRFP460 by International Rectifier
2. STW40NM50 by STMicroelectronics
3. IXFH50N50 by IXYS
4. APT40M50J by Microsemi
Ensure to check the datasheets for exact matching of parameters such as threshold voltage, Rds(on), and package type before substituting.
Features
The FQL40N50 is a type of MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) commonly used in power switching applications. Here are its key features:
1. Voltage and Current Ratings: It typically has a voltage rating of 500V and a current rating of 40A, making it suitable for high-power applications.
2. Low On-Resistance: The device exhibits low on-state resistance, which helps in reducing power loss and improving efficiency during operation.
3. Fast Switching Speed: This MOSFET is designed for fast switching, which is beneficial in applications that require high-speed operation.
4. Rugged Design: It is built to handle high energy in avalanche and commutation modes without breaking down.
5. Temperature Performance: It typically operates efficiently across a broad temperature range, which enhances its reliability in various environments.
6. Package Type: The FQL40N50 is often available in a TO-3P package, which provides good thermal performance and is easy to mount in circuit designs.
These features make the FQL40N50 ideal for use in power supplies, motor controllers, and other applications requiring efficient and high-power switching.
1. Voltage and Current Ratings: It typically has a voltage rating of 500V and a current rating of 40A, making it suitable for high-power applications.
2. Low On-Resistance: The device exhibits low on-state resistance, which helps in reducing power loss and improving efficiency during operation.
3. Fast Switching Speed: This MOSFET is designed for fast switching, which is beneficial in applications that require high-speed operation.
4. Rugged Design: It is built to handle high energy in avalanche and commutation modes without breaking down.
5. Temperature Performance: It typically operates efficiently across a broad temperature range, which enhances its reliability in various environments.
6. Package Type: The FQL40N50 is often available in a TO-3P package, which provides good thermal performance and is easy to mount in circuit designs.
These features make the FQL40N50 ideal for use in power supplies, motor controllers, and other applications requiring efficient and high-power switching.
Pinout
The FQL40N50 is a power MOSFET known for its high efficiency and fast switching capabilities. It is typically housed in a TO-3P package, which generally has 3 pins. Here is a concise description of its pin functions:
1. Gate (G): This pin is used to control the MOSFET's on/off state. A voltage applied to the gate determines if the MOSFET conducts (allows current to pass between the drain and source) or is in a non-conductive state.
2. Drain (D): The drain is the terminal through which the main current flows when the MOSFET is in the 'on' state. It is connected to the load in a typical circuit configuration.
3. Source (S): This pin is connected to the return path of the circuit or ground. The current flows out of the MOSFET through this terminal when the device is conducting.
These pins enable the FQL40N50 to function effectively in high-power, high-frequency applications, making it suitable for use in power supplies, motor controllers, and other power-related applications. Always refer to the specific datasheet for detailed specifications and pin configurations.
1. Gate (G): This pin is used to control the MOSFET's on/off state. A voltage applied to the gate determines if the MOSFET conducts (allows current to pass between the drain and source) or is in a non-conductive state.
2. Drain (D): The drain is the terminal through which the main current flows when the MOSFET is in the 'on' state. It is connected to the load in a typical circuit configuration.
3. Source (S): This pin is connected to the return path of the circuit or ground. The current flows out of the MOSFET through this terminal when the device is conducting.
These pins enable the FQL40N50 to function effectively in high-power, high-frequency applications, making it suitable for use in power supplies, motor controllers, and other power-related applications. Always refer to the specific datasheet for detailed specifications and pin configurations.
Manufacturer
The FQL40N50 is manufactured by ON Semiconductor, which is now known as onsemi. onsemi is a leading semiconductor company that designs and produces a wide range of semiconductor components. These components are used in various applications across multiple industries, including automotive, industrial, communications, computing, and consumer electronics. The company focuses on providing solutions for energy-efficient electronics, helping to improve performance and reduce energy consumption in electronic devices. onsemi specializes in power and signal management, logic, discrete, and custom devices, positioning itself as a key player in the semiconductor industry.
Application
The FQL40N50 is a power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) commonly used in various applications due to its high efficiency and fast switching capabilities. Key application areas include:
1. Switching Power Supplies: Used for converting electrical power efficiently in power supply units.
2. Motor Control: Suitable for controlling DC motors in industrial and automotive applications.
3. Inverters: Utilized in solar inverters and other energy conversion systems.
4. LED Lighting: Helps in driving LED arrays with precise control.
5. Audio Amplifiers: Employed in high-power audio circuits for improved sound quality.
6. Uninterruptible Power Supplies (UPS): Assists in power regulation and battery management.
These applications benefit from the FQL40N50's ability to handle high voltages and currents with low losses.
1. Switching Power Supplies: Used for converting electrical power efficiently in power supply units.
2. Motor Control: Suitable for controlling DC motors in industrial and automotive applications.
3. Inverters: Utilized in solar inverters and other energy conversion systems.
4. LED Lighting: Helps in driving LED arrays with precise control.
5. Audio Amplifiers: Employed in high-power audio circuits for improved sound quality.
6. Uninterruptible Power Supplies (UPS): Assists in power regulation and battery management.
These applications benefit from the FQL40N50's ability to handle high voltages and currents with low losses.
Package
The FQL40N50 is a power MOSFET, and its package type is typically TO-3P. This package is designed to handle high power, allowing for efficient thermal management in electronic circuits.
