規格
| 屬性 | 價值 |
| Package / Case | Tube |
| Series | NexFET™ |
| Part Status | Active |
| FET Type | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 80 V |
| Current - Continuous Drain(Id) @ 25°C | 150A (Ta) |
| Drive Voltage(Max Rds On Min Rds On) | 6V, 10V |
| Rds On(Max) @ Id Vgs | 3.8mOhm @ 100A, 6V |
| Vgs(th)(Max) @ Id | 3.2V @ 250µA |
| Gate Charge(Qg)(Max) @ Vgs | 76 nC @ 10 V |
| Vgs(Max) | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 7820 pF @ 40 V |
| Power Dissipation (Max) | 300W (Tc) |
| Operating Temperature | -55°C ~ 175°C (TJ) |
| Mounting Type | Through Hole |
| Supplier Device Package | TO-220-3 |
概述
Description
CSD19505KCS is typically a course code that might refer to an academic or training course. While the specific details can vary between institutions, a course labeled as CSD19505KCS is likely related to a study area in computing, software development, or a related field. The ‘CSD’ prefix might denote Computer Science Department, and the numbers could indicate a specific course sequence or level.
An introduction to such a course would cover foundational aspects, including key concepts, objectives, and learning outcomes. Students might be introduced to basic programming, software engineering principles, or other introductory topics in computing, depending on the course's focus. The course could involve lectures, practical labs, and assignments designed to build essential skills in the relevant field.
If this course is part of a specific program or curriculum, it typically serves as a prerequisite or building block for more advanced study, ensuring students have the necessary foundation to tackle complex topics in future courses. For precise information, refer to the syllabus or course description provided by the offering institution.
An introduction to such a course would cover foundational aspects, including key concepts, objectives, and learning outcomes. Students might be introduced to basic programming, software engineering principles, or other introductory topics in computing, depending on the course's focus. The course could involve lectures, practical labs, and assignments designed to build essential skills in the relevant field.
If this course is part of a specific program or curriculum, it typically serves as a prerequisite or building block for more advanced study, ensuring students have the necessary foundation to tackle complex topics in future courses. For precise information, refer to the syllabus or course description provided by the offering institution.
Equivalent
The CSD19505KCS is a N-channel MOSFET by Texas Instruments. Equivalent products can include:
1. IRF3205 - by Infineon Technologies
2. FDP7030BL - by ON Semiconductor
3. IPP075N15N3 G - by Infineon Technologies
These equivalents are selected based on similar voltage, current ratings, and package type, but always verify specifications to ensure suitability for your application.
1. IRF3205 - by Infineon Technologies
2. FDP7030BL - by ON Semiconductor
3. IPP075N15N3 G - by Infineon Technologies
These equivalents are selected based on similar voltage, current ratings, and package type, but always verify specifications to ensure suitability for your application.
Features
The CSD19505KCS is a power MOSFET transistor known for its specific features, which include:
1. N-Channel Design: It is an N-channel MOSFET, which is typically used for switching and amplification applications.
2. Voltage and Current Ratings: The device can handle high voltages and currents, usually specified in the datasheet, making it suitable for high-power applications.
3. Low On-Resistance: It features low on-resistance, which reduces power loss and improves efficiency during operation.
4. Fast Switching: The device is designed for fast switching speeds, which is beneficial in applications requiring rapid on/off cycles.
5. Thermal Performance: It often includes characteristics that enhance thermal performance, helping to dissipate heat effectively.
6. Package Type: Typically comes in a TO-220 package, which is common for power transistors and provides reliable thermal and electrical connections.
These features make the CSD19505KCS suitable for use in power supplies, motor drivers, and other applications requiring efficient power management. For precise specifications, refer to the manufacturer’s datasheet.
1. N-Channel Design: It is an N-channel MOSFET, which is typically used for switching and amplification applications.
2. Voltage and Current Ratings: The device can handle high voltages and currents, usually specified in the datasheet, making it suitable for high-power applications.
3. Low On-Resistance: It features low on-resistance, which reduces power loss and improves efficiency during operation.
4. Fast Switching: The device is designed for fast switching speeds, which is beneficial in applications requiring rapid on/off cycles.
5. Thermal Performance: It often includes characteristics that enhance thermal performance, helping to dissipate heat effectively.
6. Package Type: Typically comes in a TO-220 package, which is common for power transistors and provides reliable thermal and electrical connections.
These features make the CSD19505KCS suitable for use in power supplies, motor drivers, and other applications requiring efficient power management. For precise specifications, refer to the manufacturer’s datasheet.
Pinout
The CSD19505KCS is a power MOSFET from Texas Instruments. It comes in a TO-220 package and has three pins. The pin functions are as follows:
1. Gate (G): This pin controls the MOSFET's conduction state. Applying a voltage to the gate allows current to flow between the drain and source.
2. Drain (D): This pin is where the load current flows through when the MOSFET is in the 'on' state. It's connected to the load in a circuit.
3. Source (S): This pin is connected to the common ground or return path in the circuit. It acts as the reference point for the drain current.
The CSD19505KCS is typically used in applications requiring high efficiency and fast switching, such as power supply circuits and motor controllers.
1. Gate (G): This pin controls the MOSFET's conduction state. Applying a voltage to the gate allows current to flow between the drain and source.
2. Drain (D): This pin is where the load current flows through when the MOSFET is in the 'on' state. It's connected to the load in a circuit.
3. Source (S): This pin is connected to the common ground or return path in the circuit. It acts as the reference point for the drain current.
The CSD19505KCS is typically used in applications requiring high efficiency and fast switching, such as power supply circuits and motor controllers.
Manufacturer
The CSD19505KCS is manufactured by Texas Instruments. Texas Instruments is a global semiconductor company that designs and manufactures a wide range of electronic devices, including integrated circuits and semiconductor solutions. They are known for producing products used in various applications, such as industrial, automotive, personal electronics, and communications equipment. Texas Instruments is a leader in the development and innovation of analog and embedded processing technologies.
Application
The CSD19505KCS is a power MOSFET transistor, specifically designed for high-efficiency and high-speed power switching applications. It is commonly used in areas such as:
1. DC-DC Converters: Utilized in power management systems to efficiently convert and regulate voltage levels.
2. Motor Drives: Employed in controlling and driving electric motors with precision and efficiency.
3. Power Supply Units: Integral to the design of efficient and compact power supplies for various electronic devices.
4. Battery Management Systems: Used in managing the charging and discharging processes in battery-operated devices.
5. Renewable Energy Systems: Applied in solar inverters and other renewable energy conversion systems to maximize energy efficiency.
These applications leverage the MOSFET's fast switching capabilities and low on-resistance.
1. DC-DC Converters: Utilized in power management systems to efficiently convert and regulate voltage levels.
2. Motor Drives: Employed in controlling and driving electric motors with precision and efficiency.
3. Power Supply Units: Integral to the design of efficient and compact power supplies for various electronic devices.
4. Battery Management Systems: Used in managing the charging and discharging processes in battery-operated devices.
5. Renewable Energy Systems: Applied in solar inverters and other renewable energy conversion systems to maximize energy efficiency.
These applications leverage the MOSFET's fast switching capabilities and low on-resistance.
Package
The CSD19505KCS is a power MOSFET, and it comes in a TO-220 package type. The TO-220 is a standard package used for high-power semiconductors, providing a balance between size and heat dissipation.
