規格
| 屬性 | 價值 |
| Package / Case | Bulk |
| Part Status | Active |
概述
Description
The BZX84-C6V8215 is a Zener diode commonly used for voltage regulation in electronic circuits. It is part of the BZX84 series, which is known for its small SOT-23 surface-mount package, making it suitable for compact circuit designs. The "C6V8" indicates its Zener voltage, which is nominally 6.8 volts, while the "215" refers to specific manufacturer or batch codes that may denote tolerance or other characteristics.
This diode is ideal for providing a stable reference voltage in linear voltage regulators, protecting circuits from overvoltage conditions, and for use in switching applications. It typically handles low power levels, often featuring a power dissipation of around 300 milliwatts. The BZX84-C6V8215 is prized for its reliability, low cost, and ease of integration into various electronic projects, from consumer electronics to industrial applications. As with all Zener diodes, it should be used within its specified limits to ensure optimal performance and longevity.
This diode is ideal for providing a stable reference voltage in linear voltage regulators, protecting circuits from overvoltage conditions, and for use in switching applications. It typically handles low power levels, often featuring a power dissipation of around 300 milliwatts. The BZX84-C6V8215 is prized for its reliability, low cost, and ease of integration into various electronic projects, from consumer electronics to industrial applications. As with all Zener diodes, it should be used within its specified limits to ensure optimal performance and longevity.
Equivalent
The BZX84-C6V8215 is a Zener diode typically used for voltage regulation. Equivalent products include:
1. Nexperia BZX84-C6V8
2. ON Semiconductor BZX84C6V8LT1G
3. Vishay BZX84C6V8
These components share similar voltage and power ratings, making them suitable replacements for circuits requiring this specific Zener diode specification. Always verify the datasheet to ensure compatibility with your application's requirements.
1. Nexperia BZX84-C6V8
2. ON Semiconductor BZX84C6V8LT1G
3. Vishay BZX84C6V8
These components share similar voltage and power ratings, making them suitable replacements for circuits requiring this specific Zener diode specification. Always verify the datasheet to ensure compatibility with your application's requirements.
Features
The BZX84-C6V8 is a Zener diode with specific features aimed at voltage regulation applications. Here are the key features:
1. Package Type: It is typically available in a SOT-23 package, which is a small surface-mounted package ideal for compact circuit designs.
2. Zener Voltage: The diode has a nominal Zener voltage of approximately 6.8 V, which helps in providing a stable reference voltage.
3. Tolerance: It usually comes with a voltage tolerance of about ±5%, ensuring precision in voltage regulation.
4. Power Dissipation: The power dissipation of this diode is generally around 300 mW, allowing it to handle moderate power levels.
5. Temperature Range: It operates over a wide temperature range, typically from -65°C to +150°C, making it suitable for various environmental conditions.
6. Low Leakage Current: The diode features low reverse leakage current, which minimizes power loss when in the non-conducting state.
These features make the BZX84-C6V8 suitable for use in voltage stabilization, reference voltage generation, and protection circuits in electronic devices.
1. Package Type: It is typically available in a SOT-23 package, which is a small surface-mounted package ideal for compact circuit designs.
2. Zener Voltage: The diode has a nominal Zener voltage of approximately 6.8 V, which helps in providing a stable reference voltage.
3. Tolerance: It usually comes with a voltage tolerance of about ±5%, ensuring precision in voltage regulation.
4. Power Dissipation: The power dissipation of this diode is generally around 300 mW, allowing it to handle moderate power levels.
5. Temperature Range: It operates over a wide temperature range, typically from -65°C to +150°C, making it suitable for various environmental conditions.
6. Low Leakage Current: The diode features low reverse leakage current, which minimizes power loss when in the non-conducting state.
These features make the BZX84-C6V8 suitable for use in voltage stabilization, reference voltage generation, and protection circuits in electronic devices.
Pinout
The BZX84-C6V8215 is a specific type of SMD (Surface-Mount Device) Zener diode. Typically, Zener diodes in the BZX84 series come in a SOT-23 package. This package has a pin count of three. The pins serve the following functions:
1. Anode (A): Usually connected to the ground or lower potential side of the circuit.
2. Cathode (K): Connected to the higher potential side, where the regulated voltage is needed.
3. Common Terminal (not always used): In some configurations, the third pin may not be essential for operation and may be internally connected or used for additional mounting stability.
The BZX84 series, including the BZX84-C6V8215, is used for voltage regulation, clamping, and protection in circuits, providing a stable output voltage (6.8V in this case) despite variations in input voltage or load conditions.
1. Anode (A): Usually connected to the ground or lower potential side of the circuit.
2. Cathode (K): Connected to the higher potential side, where the regulated voltage is needed.
3. Common Terminal (not always used): In some configurations, the third pin may not be essential for operation and may be internally connected or used for additional mounting stability.
The BZX84 series, including the BZX84-C6V8215, is used for voltage regulation, clamping, and protection in circuits, providing a stable output voltage (6.8V in this case) despite variations in input voltage or load conditions.
Application
The BZX84-C6V8 is a Zener diode used primarily for voltage regulation and reference in electronic circuits. Key application areas include:
1. Voltage Regulation: Maintaining a stable voltage level in power supply circuits.
2. Overvoltage Protection: Preventing excessive voltage in sensitive components.
3. Signal Clipping: Limiting signal voltages in analog circuits.
4. Reference Voltage: Providing a precise voltage reference for circuits like analog-to-digital converters.
5. Switching Circuits: Used in low-power switching applications.
These diodes are commonly found in consumer electronics, telecommunications, and automotive electronics where precise voltage regulation is required.
1. Voltage Regulation: Maintaining a stable voltage level in power supply circuits.
2. Overvoltage Protection: Preventing excessive voltage in sensitive components.
3. Signal Clipping: Limiting signal voltages in analog circuits.
4. Reference Voltage: Providing a precise voltage reference for circuits like analog-to-digital converters.
5. Switching Circuits: Used in low-power switching applications.
These diodes are commonly found in consumer electronics, telecommunications, and automotive electronics where precise voltage regulation is required.
Package
The BZX84-C6V8215 is a Zener diode typically housed in a SOT-23 package. This surface-mount package is commonly used for small signal diodes and transistors, offering a compact size suitable for automated assembly processes.
