規格
| 屬性 | 價值 |
| Package / Case | 385 |
| Series | Bulk |
| Type | Active |
概述
Description
The PCA9534D is an I2C-bus controlled 8-bit I/O expander manufactured by NXP Semiconductors. It is designed to provide additional I/O capabilities for microcontrollers with limited GPIO (General Purpose Input/Output) pins. The device features eight I/O pins that can be individually configured as either inputs or outputs.
Key features of the PCA9534D include:
- I2C Interface: Communicates via the I2C bus, supporting standard and fast modes with speeds up to 400 kHz.
- Configurable I/O Pins: Each of the eight pins can be set independently as an input or output.
- Interrupt Output: Provides an interrupt output that alerts the microcontroller to changes on input pins.
- Open-Drain Outputs: Allows for the connection of multiple devices on the same line.
- Low Standby Current: Consumes minimal power when not in active use, making it suitable for battery-powered applications.
The PCA9534D is frequently used in applications requiring expanded I/O ports without additional microcontroller complexity, such as home automation, industrial control systems, and portable electronics.
Key features of the PCA9534D include:
- I2C Interface: Communicates via the I2C bus, supporting standard and fast modes with speeds up to 400 kHz.
- Configurable I/O Pins: Each of the eight pins can be set independently as an input or output.
- Interrupt Output: Provides an interrupt output that alerts the microcontroller to changes on input pins.
- Open-Drain Outputs: Allows for the connection of multiple devices on the same line.
- Low Standby Current: Consumes minimal power when not in active use, making it suitable for battery-powered applications.
The PCA9534D is frequently used in applications requiring expanded I/O ports without additional microcontroller complexity, such as home automation, industrial control systems, and portable electronics.
Equivalent
The PCA9534D is an I2C-bus I/O port expander. Equivalent products include the PCF8574, MCP23008, TCA9534, and SX1508. These alternatives offer similar functionality, providing additional GPIO ports over an I2C interface. Always check specific datasheets and ensure compatibility with your application before substituting, as there might be differences in parameters such as voltage levels, pin configuration, and additional features.
Features
The PCA9534D is an I²C-bus controlled 8-bit I/O port with interrupt capability. It features eight programmable input/output pins that can be configured as either inputs or outputs. The device operates in a voltage range of 2.3V to 5.5V, making it suitable for various applications. It supports a maximum I²C frequency of 400 kHz (Fast-mode).
Key features include:
1. I²C Interface: Compatible with standard and fast I²C protocols.
2. 8-bit I/O Port: Expandable GPIO pins for additional control in systems.
3. Interrupt Output: Alerts the host microcontroller of state changes in the input port.
4. Low Standby Current: Reduces power consumption in applications.
5. High Output Drive: Capable of driving LEDs directly when configured as outputs.
6. Flexible Addressing: Supports multiple devices on the same bus with three address pins.
7. Wide Voltage Range: Operates from 2.3V to 5.5V, suitable for diverse applications.
8. ESD Protection: Provides enhanced reliability.
The PCA9534D is used in applications like system monitoring, industrial control, and portable devices where additional I/O is needed.
Key features include:
1. I²C Interface: Compatible with standard and fast I²C protocols.
2. 8-bit I/O Port: Expandable GPIO pins for additional control in systems.
3. Interrupt Output: Alerts the host microcontroller of state changes in the input port.
4. Low Standby Current: Reduces power consumption in applications.
5. High Output Drive: Capable of driving LEDs directly when configured as outputs.
6. Flexible Addressing: Supports multiple devices on the same bus with three address pins.
7. Wide Voltage Range: Operates from 2.3V to 5.5V, suitable for diverse applications.
8. ESD Protection: Provides enhanced reliability.
The PCA9534D is used in applications like system monitoring, industrial control, and portable devices where additional I/O is needed.
Pinout
The PCA9534D is an 8-bit I/O expander with an I2C bus interface. It comes in a 16-pin package. The primary function of the PCA9534D is to provide additional I/O ports for microcontrollers, enabling them to control more devices with limited GPIO (General Purpose Input/Output) pins. The device features eight pins that can be configured individually as either inputs or outputs, allowing for flexible control of connected components. It is often used in applications requiring expanded I/O capabilities, such as industrial control systems and consumer electronics. The pins include power (VCC), ground (GND), I2C data (SDA) and clock (SCL) lines, interrupt (INT), and the eight I/O pins (P0–P7).
Manufacturer
The PCA9534D is manufactured by NXP Semiconductors. NXP is a global semiconductor company headquartered in Eindhoven, Netherlands. It specializes in the production of semiconductors and related technology, focusing on areas such as automotive, industrial, mobile, and communication infrastructure. NXP is known for its development of secure connectivity solutions for embedded applications, serving industries that require high-performance and secure electronic systems.
Application
The PCA9534D is a general-purpose I/O expander commonly used in applications requiring additional I/O ports. Key application areas include:
1. Consumer Electronics: Extends GPIOs in devices like TVs and gaming consoles.
2. Industrial Automation: Facilitates control and monitoring in PLCs and smart sensors.
3. Networking: Manages status indicators and control signals in routers and switches.
4. Automotive: Provides GPIO expansion in infotainment systems and electronic control units.
5. Home Automation: Integrates with smart home devices for enhanced control features.
6. Medical Devices: Supports additional functionality in diagnostic and monitoring equipment.
These applications benefit from the PCA9534D’s ability to interface with microcontrollers via the I2C bus, adding flexibility and scalability.
1. Consumer Electronics: Extends GPIOs in devices like TVs and gaming consoles.
2. Industrial Automation: Facilitates control and monitoring in PLCs and smart sensors.
3. Networking: Manages status indicators and control signals in routers and switches.
4. Automotive: Provides GPIO expansion in infotainment systems and electronic control units.
5. Home Automation: Integrates with smart home devices for enhanced control features.
6. Medical Devices: Supports additional functionality in diagnostic and monitoring equipment.
These applications benefit from the PCA9534D’s ability to interface with microcontrollers via the I2C bus, adding flexibility and scalability.
Package
The PCA9534D is a digital I/O expander with an I2C interface, manufactured by NXP Semiconductors. Its package type is SOIC (Small Outline Integrated Circuit) with 16 pins.
