圖片僅供參考

BC846A

Name: BC846A
Rating: 4.8 (15 reviews)

+物料清單

TRANS NPN 65V 0.1A SOT23-3

製造商迪奧泰克半導體
製造商部分 #BC846A
數據表 BC846A DataSheet
包裹 SOT-23
有存貨4388

365 天品質保證

7*24 小時服務保證

90-日售後保障

正品保證

規格

屬性	價值
Package / Case	Strip
Part Status	Active
Transistor Type	NPN
Current - Collector(Ic)(Max)	100 mA
Voltage - Collector Emitter Breakdown(Max)	65 V
Vce Saturation(Max) @ Ib Ic	600mV @ 5mA, 100mA
Current - Collector Cutoff(Max)	15nA (ICBO)
DC Current Gain(h FE)(Min) @ Ic Vce	110 @ 2mA, 5V
Power - Max	250 mW
Frequency - Transition	300MHz
Operating Temperature	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount

概述

Description

The BC846A is a general-purpose NPN bipolar junction transistor (BJT) in a small SOT-23 package, commonly used for amplification and switching in low-power applications. Key features include:
- Current/Voltage Ratings: Max collector current (Ic) of 100mA, collector-emitter voltage (Vce) of 65V.
- Gain (hFE): 110–450 (at 2mA Ic), ensuring good signal amplification.
- Low Noise: Suitable for analog signal processing.
- High Speed: Transition frequency (fT) of 100MHz, useful for RF and fast switching.
It’s often paired with its PNP counterpart (BC856A) in complementary circuits. Typical applications include audio preamps, signal amplification, and digital logic switching.
Advantages: Compact size, cost-effective, and widely available.
Limitations: Not suited for high-power or high-voltage scenarios.
For detailed specs, refer to the datasheet.

Equivalent

The BC846A is a general-purpose NPN transistor. Equivalent alternatives include:
- BC847A (similar specs, slightly higher current)
- 2N3904 (common NPN, widely available)
- MMBT3904 (SMD version of 2N3904)
- BC546A (higher voltage rating)
- KSC1845 (low noise, high gain)
Check datasheets for exact parameter matching in your circuit.

Features

The BC846A is a general-purpose NPN bipolar junction transistor (BJT) with the following key features:
- Package: SOT-23 (small surface-mount)
- Voltage Ratings:
- Collector-Emitter Voltage (V_CEO): 65V
- Collector-Base Voltage (V_CBO): 80V
- Emitter-Base Voltage (V_EBO): 6V
- Current Ratings:
- Continuous Collector Current (I_C): 100mA
- Peak Collector Current (I_CM): 200mA
- Power Dissipation (P_tot): 250mW
- Gain (h_FE): 110–450 (at I_C = 2mA, V_CE = 5V)
- Transition Frequency (f_T): 100MHz (typical)
- Low Noise: Suitable for small-signal amplification
- Applications: Switching, amplification, and driver circuits in consumer electronics.
Compact, cost-effective, and widely used in low-power designs.

Application

The BC846A is a general-purpose NPN bipolar junction transistor (BJT) commonly used in:
1. Amplification – Small-signal amplification in audio and RF circuits.
2. Switching – Low-power switching in digital and control circuits.
3. Signal Processing – Used in oscillators, modulators, and detectors.
4. Consumer Electronics – Found in TVs, radios, and mobile devices.
5. Embedded Systems – Interface and driver circuits in microcontrollers.
Its low noise, high gain, and compact SOT-23 package make it suitable for space-constrained applications.

Package

The BC846A is a general-purpose NPN transistor available in a SOT-23 surface-mount package. This compact 3-pin package is widely used for small-signal amplification and switching applications. The SOT-23 is suitable for high-density PCB designs due to its small footprint (approx. 2.9mm x 1.3mm x 0.95mm).