規格
| 屬性 | 價值 |
| Supplier | DComponents |
| Package | Strip |
| ProductStatus | Active |
| TransistorType | NPN |
| Current-Collector(Ic)(Max) | 500 mA |
| Voltage-CollectorEmitterBreakdown(Max) | 45 V |
| VceSaturation(Max)@IbIc | 700mV @ 50mA, 500mA |
| Current-CollectorCutoff(Max) | 100nA (ICBO) |
| DCCurrentGain(hFE)(Min)@IcVce | 160 @ 100mA, 1V |
| Power-Max | 200 mW |
| Frequency-Transition | 100MHz |
| OperatingTemperature | -55°C ~ 150°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | SC-70, SOT-323 |
概述
Description
BC817-25W is a variant of the BC817 general‑purpose NPN transistor. It’s used for low‑power switching and small‑signal amplification in many consumer electronics.
Key points:
- Type: NPN bipolar transistor
- Typical BC817 family ratings: Vceo ≈ 45 V; Ic up to ~500 mA; Ptot in a TO‑92 package around 0.4–0.6 W at 25°C
- Gain: hFE varies widely with Ic and temperature
- Package options: TO‑92 (through‑hole) and some SMD variants; the “-25W” suffix is manufacturer‑specific and not universal
Applications: relay drivers, amplifier stages, sensor conditioning, general‑purpose switching.
Design notes: provide proper base bias (base resistor) for saturation if used as a switch; include a flyback diode for inductive loads; always check the exact datasheet for the -25W variant to confirm Vce(sat), hFE, and max power.
Key points:
- Type: NPN bipolar transistor
- Typical BC817 family ratings: Vceo ≈ 45 V; Ic up to ~500 mA; Ptot in a TO‑92 package around 0.4–0.6 W at 25°C
- Gain: hFE varies widely with Ic and temperature
- Package options: TO‑92 (through‑hole) and some SMD variants; the “-25W” suffix is manufacturer‑specific and not universal
Applications: relay drivers, amplifier stages, sensor conditioning, general‑purpose switching.
Design notes: provide proper base bias (base resistor) for saturation if used as a switch; include a flyback diode for inductive loads; always check the exact datasheet for the -25W variant to confirm Vce(sat), hFE, and max power.
Equivalent
Direct equivalents: BC817-25W ≈ BC817-25 (same hFE bin) and BC817W (package variant). Common substitutes with similar NPN specs: BC817 (other gain bins: -16, -40), BC337, 2N2222 / PN2222A / MMBT2222, and 2N3904. Verify Vce, Ic, hFE and pinout before swapping—these are similar, not always exact, replacements.
Features
Here are typical features of BC817-25W (general-purpose NPN transistor):
- Type: NPN general-purpose transistor
- Vceo: ~45 V
- Ic(max): up to 0.5 A
- Gain (hFE): ~100–800 (depends on Ic and temperature)
- Vce(sat): ~0.2–0.4 V at moderate Ib/Ic drive
- Power: ~0.5 W (TO‑92 package, at 25°C)
- Package/pinout: TO‑92 (E-B-C from flat face)
- Performance: suitable for switching and amplification, low noise
- Compliance: RoHS/Pb-free variants available
Note: exact values vary by lot and package variant; consult the datasheet for your specific BC817-25W lot.
- Type: NPN general-purpose transistor
- Vceo: ~45 V
- Ic(max): up to 0.5 A
- Gain (hFE): ~100–800 (depends on Ic and temperature)
- Vce(sat): ~0.2–0.4 V at moderate Ib/Ic drive
- Power: ~0.5 W (TO‑92 package, at 25°C)
- Package/pinout: TO‑92 (E-B-C from flat face)
- Performance: suitable for switching and amplification, low noise
- Compliance: RoHS/Pb-free variants available
Note: exact values vary by lot and package variant; consult the datasheet for your specific BC817-25W lot.
Pinout
- Pin count: 3
- Function: NPN small-signal bipolar transistor (general-purpose for amplification and switching)
- Typical pinout (TO-92 package, flat face toward you): Pin 1 = Emitter, Pin 2 = Base, Pin 3 = Collector
Note: pinout can vary by package; verify against the specific BC817-25W datasheet if using a different package (e.g., SMD).
- Function: NPN small-signal bipolar transistor (general-purpose for amplification and switching)
- Typical pinout (TO-92 package, flat face toward you): Pin 1 = Emitter, Pin 2 = Base, Pin 3 = Collector
Note: pinout can vary by package; verify against the specific BC817-25W datasheet if using a different package (e.g., SMD).
Manufacturer
The BC817-25W is a variant of the BC817 NPN general‑purpose transistor produced by multiple semiconductor suppliers (e.g., Nexperia/NXP, ON Semiconductor, Diodes Inc., Vishay, ROHM). The original BC817 family traces back to Philips/NXP.
These manufacturers are semiconductor companies — they design, manufacture and sell electronic components (discrete transistors, diodes, ICs and related devices) for use in consumer, industrial, automotive and communications applications.
These manufacturers are semiconductor companies — they design, manufacture and sell electronic components (discrete transistors, diodes, ICs and related devices) for use in consumer, industrial, automotive and communications applications.
Application
BC817-25W is a general‑purpose NPN transistor for low‑power switching and small‑signal amplification. Common application areas:
- Signal amplification in audio, sensor front ends, and microcontroller interfaces
- Switching loads such as relays, LEDs, small DC motors, and optocouplers
- Buffer/level‑shifting stages between microcontrollers and higher‑voltage circuitry
- Driver stages in DC–DC converters and power supplies
- General gain stages in automotive and consumer electronics
With Vce ≈ 45 V and Ic up to ~500 mA, it suits hobbyist and industrial designs in TO‑92 or SMT packages.
- Signal amplification in audio, sensor front ends, and microcontroller interfaces
- Switching loads such as relays, LEDs, small DC motors, and optocouplers
- Buffer/level‑shifting stages between microcontrollers and higher‑voltage circuitry
- Driver stages in DC–DC converters and power supplies
- General gain stages in automotive and consumer electronics
With Vce ≈ 45 V and Ic up to ~500 mA, it suits hobbyist and industrial designs in TO‑92 or SMT packages.
Package
The BC817-25 (BC817-25W) is typically supplied in a TO-92 plastic 3-pin through-hole package. Standard pinout (flat face toward you): left = Base, middle = Collector, right = Emitter — verify with the specific manufacturer datasheet.
