規格
| 屬性 | 價值 |
| Supplier | Texas Instruments |
| Package / Case | Tray |
| Series | Sitara™ |
| Part Status | Active |
| Core Processor | ARM926EJ-S |
| Number of Cores / Bus Width | 1 Core, 32-Bit |
| Speed | 456MHz |
| Co - Processors / DSP | System Control; CP15 |
| RAM Controllers | LPDDR, DDR2 |
| Graphics Acceleration | No |
| Display&Interface Controllers | LCD |
| Ethernet | 10/100Mbps (1) |
| SATA | SATA 3Gbps (1) |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Voltage - I / O | 1.8V, 3.3V |
| Operating Temperature | 0°C ~ 90°C (TJ) |
概述
Description
AM1808EZWT4 is TI’s AM1808 Sitara ARM Cortex-A8 based evaluation module (EVM). It’s a development board used to quickly evaluate the AM1808 SoC and prototype embedded applications.
Key points:
- SoC/core: ARM Cortex‑A8 on the AM1808, with onboard memory and standard I/O
- Peripherals and interfaces: Ethernet, USB, CAN, multiple serial ports, GPIO, and LCD/video interfaces (plus SD/MMC)
- Software: supports Linux or TI RTOS/StarterWare with a bootloader; development with TI tools (Code Composer Studio) and vendor BSPs
- Use cases: hardware/software co-design, driver development, peripheral prototyping, and early hardware-in-the-loop testing
What to do next:
- Refer to the AM1808 data sheet and the EZWT4 hardware user guide for wiring and schematics
- Install CCS or your preferred IDE, load the BSP, and build/run to boot from SD/eMMC
This should give you a concise overview of what AM1808EZWT4 is and how it’s used.
Key points:
- SoC/core: ARM Cortex‑A8 on the AM1808, with onboard memory and standard I/O
- Peripherals and interfaces: Ethernet, USB, CAN, multiple serial ports, GPIO, and LCD/video interfaces (plus SD/MMC)
- Software: supports Linux or TI RTOS/StarterWare with a bootloader; development with TI tools (Code Composer Studio) and vendor BSPs
- Use cases: hardware/software co-design, driver development, peripheral prototyping, and early hardware-in-the-loop testing
What to do next:
- Refer to the AM1808 data sheet and the EZWT4 hardware user guide for wiring and schematics
- Install CCS or your preferred IDE, load the BSP, and build/run to boot from SD/eMMC
This should give you a concise overview of what AM1808EZWT4 is and how it’s used.
Pinout
208-pin. It is a Sitara AM180x ARM Cortex-A8-based application processor (SoC) used for embedded systems, providing the CPU plus integrated peripherals (memory controller, USB, Ethernet, etc.) in the EZWT4 package.
Manufacturer
The manufacturer is Texas Instruments (TI). TI is an American multinational semiconductor company that designs and manufactures analog and embedded processing ICs, microcontrollers, DSPs, and other semiconductor products.
Application
AM1808EZWT4 (Sitara AM180x Cortex‑A8) is used in a range of embedded applications, including:
- Industrial automation and HMI (touchscreens, PLCs, motor control)
- Imaging and machine vision (video capture, real-time processing)
- Digital signage and multimedia appliances (set-top boxes, media players)
- Automotive instrumentation and telematics (in-vehicle displays)
- Medical devices and portable diagnostics
- Networking/edge devices and video surveillance
- Consumer electronics and smart appliances
- Building automation and smart energy systems
- Industrial automation and HMI (touchscreens, PLCs, motor control)
- Imaging and machine vision (video capture, real-time processing)
- Digital signage and multimedia appliances (set-top boxes, media players)
- Automotive instrumentation and telematics (in-vehicle displays)
- Medical devices and portable diagnostics
- Networking/edge devices and video surveillance
- Consumer electronics and smart appliances
- Building automation and smart energy systems
Package
AM1808EZWT4 is packaged in a 256-ball FBGA (fine-pinned BGA) package.
