ADS8345E/2K5 vs ADS8344E/2K5G4

對 ADS8345E/2K5 和 ADS8344E/2K5G4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS8344E/2K5G4 is a strong functional replacement candidate for the ADS8345E/2K5, sharing the same 16-bit SAR architecture, 4-channel differential input configuration, and 200 kSPS throughput in an identical SSOP-20 package. The primary distinction is the serial interface logic level, where the ADS8345E operates from a 2.7 V to 5 V supply with a correspondingly wider digital I/O range, while the ADS8344E is specified for 5 V operation. Designers should validate the digital interface voltage compatibility and reference configuration against the target system before final qualification.

Resolution and Architecture High match
Input Channel Configuration High match
Package and Footprint High match
Supply Voltage Range Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8345E/2K5 ADS8344E/2K5G4 Why it matters
Resolution (bits) 16 16 Both are 16-bit SAR ADCs, so resolution is identical and not a differentiator for substitutability.
Number of input channels 8 (single-ended) / 4 (differential) 8 (single-ended) / 4 (differential) Channel count determines how many signals can be multiplexed into one ADC; identical here.
Sampling rate (max) 100 kSPS 100 kSPS Maximum throughput affects achievable signal bandwidth; both support up to 100 kSPS.
Supply voltage (analog) 2.7 V to 5.25 V 2.7 V to 5.25 V Analog supply range must match the system rail; identical ranges allow drop-in use.
Interface SPI-compatible serial (SPI/QSPI/Microwire) SPI-compatible serial (SPI/QSPI/Microwire) Serial interface compatibility ensures the same host controller can drive either part.
Reference input External reference External reference Both require an external reference, so the same reference circuit can be reused.
Package 20-pin SSOP (DBQ) 20-pin SSOP (DBQ) Package and pinout must match for board-level interchangeability; both use the same 20-pin SSOP.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Industrial temperature range suitability is identical for both devices.
Power consumption (typical) ~0.8 mW at 100 kSPS, 5 V ~0.8 mW at 100 kSPS, 5 V Similar power draw means thermal and supply budgeting is unaffected when substituting.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8345E/2K5 ADS8344E/2K5G4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 16 16
Sampling Rate(Per Second) 100k 100k
Number of Inputs 4, 8 4, 8
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS8345E/2K5 and ADS8344E/2K5G4?

The ADS8345E/2K5 is an 8-channel, 16-bit SAR ADC with a serial interface, while the ADS8344E/2K5G4 is a 4-channel, 16-bit SAR ADC. The ADS8345 provides twice the input channel count of the ADS8344, but both share similar 16-bit resolution, SAR architecture, and serial SPI/QSPI/MICROWIRE-compatible interface characteristics.

Are the ADS8345E/2K5 and ADS8344E/2K5G4 pin-compatible?

No. The ADS8345E/2K5 and ADS8344E/2K5G4 are not pin-compatible because they have different channel counts (8 vs 4) and correspondingly different pin functions and package configurations. A direct drop-in replacement is not possible without PCB redesign and validation against the respective datasheets.

What is the resolution and architecture of both devices?

Both the ADS8345E/2K5 and ADS8344E/2K5G4 are 16-bit successive-approximation-register (SAR) analog-to-digital converters. They provide 16-bit resolution with a SAR architecture, suitable for precision measurement and data acquisition applications.

What type of serial interface do these ADCs use?

Both the ADS8345E/2K5 and ADS8344E/2K5G4 feature a serial interface compatible with SPI, QSPI, and MICROWIRE protocols, allowing straightforward connection to most microcontrollers and DSPs.

How do the input channel counts differ between the two parts?

The ADS8345E/2K5 provides 8 input channels, whereas the ADS8344E/2K5G4 provides 4 input channels. This difference makes the ADS8345 better suited for multi-channel signal acquisition, while the ADS8344 is appropriate for lower-channel-count designs.

What does the /2K5 suffix indicate on these part numbers?

The /2K5 suffix indicates the tape-and-reel packaging quantity of 2,500 units per reel, which is the standard ordering format for automated PCB assembly. The G4 suffix on the ADS8344E/2K5G4 denotes a green/RoHS-compliant package variant per Texas Instruments ordering conventions.

Can the ADS8344E/2K5G4 be used as a substitute for the ADS8345E/2K5 in an existing design?

No, not as a direct substitute. Because the ADS8345E/2K5 has 8 channels and the ADS8344E/2K5G4 has only 4 channels, substituting would leave half of the input channels unavailable and may require PCB and firmware changes. Any substitution must be validated against the manufacturer datasheets and the target design requirements.