ADS8345E/2K5
德州儀器
- Lifecycle
- Active
- Stock
- 3595 件
- Package
- SSOP-20
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS8345E/2K5 和 ADS830EG4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS8345E/2K5 and ADS830EG4 are not functionally interchangeable. The ADS8345E/2K5 is a 16-bit, 4-channel successive-approximation ADC with a serial SPI/QSPI interface in a 20-pin SSOP package, while the ADS830EG4 is an 8-bit, single-channel pipelined ADC with a parallel output interface in a 20-pin SOIC package. The differences in resolution, channel count, output interface, and package footprint make direct substitution impractical without a complete redesign of the surrounding circuitry.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8345E/2K5 | ADS830EG4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 8 bit | Resolution determines the smallest signal change the ADC can distinguish; a 16-bit part offers far finer quantization than an 8-bit part, so they are not functionally interchangeable in precision applications. |
| Number of Input Channels | 8 single-ended / 4 differential | 1 single-ended | Channel count defines how many signals can be digitized; the multi-channel ADS8345 suits multiplexed multi-sensor systems, while the single-channel ADS830 targets one high-speed signal path. |
| Sampling Rate | 100 kSPS | 60 MSPS | Maximum sample rate sets the bandwidth of signals that can be captured; the ADS830 is roughly 600x faster, making it suitable for high-frequency/IF sampling where the ADS8345 cannot be used. |
| Architecture | SAR (successive approximation) | Pipeline | Converter architecture affects latency, speed, and power trade-offs; SAR offers low latency and low power at moderate speed, while pipeline enables very high throughput at the cost of latency and power. |
| Interface | SPI / serial (QSPI, Microwire, DSP compatible) | Parallel (8-bit) | The digital interface must match the host controller; a serial SPI device and a parallel-output device require different board routing and firmware, preventing drop-in substitution. |
| Supply Voltage | 2.7 V to 5.25 V (analog and digital) | 5 V (single supply) | Supply voltage compatibility determines whether the part can operate in a given system rail; the wide-range ADS8345 supports low-voltage designs, whereas the ADS830 requires a 5 V rail. |
| Input Configuration | Single-ended or differential (software selectable) | Single-ended | Differential inputs improve noise immunity and dynamic range; only the ADS8345 offers this flexibility, which matters for low-level or noisy signal environments. |
| Package | SSOP-20 | SOIC-20 | Package footprint and pinout must match for board-level interchangeability; different package types require layout changes and cannot be directly swapped. |
| Typical Power Consumption | Low power (approx. 1.5 mW at 100 kSPS, 5 V) | Higher power (approx. 190 mW at 60 MSPS, 5 V) | Power budget constrains portable and thermally sensitive designs; the low-power SAR part suits battery systems, while the high-speed pipeline part draws substantially more current. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8345E/2K5 | ADS830EG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 8 |
| Sampling Rate(Per Second) | 100k | 60M |
| Number of Inputs | 4, 8 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | Pipelined |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation register (SAR) analog-to-digital converter with a maximum sampling rate of 100 kSPS, while the ADS830EG4 is an 8-bit, single-channel pipeline ADC with a maximum sampling rate of 60 MSPS. They differ fundamentally in resolution, architecture, channel count, and speed.
The ADS8345E/2K5 operates from a single 2.7 V to 5.25 V analog and digital supply. The ADS830EG4 requires a 5 V analog supply and a separate 3 V to 5 V digital output supply.
The ADS8345E/2K5 supports eight single-ended inputs or four differential inputs, selectable via its input multiplexer. The ADS830EG4 provides a single-ended analog input with an internal reference and a flexible input range.
The ADS8345E/2K5 uses a serial SPI-compatible interface. The ADS830EG4 provides a parallel CMOS-compatible output bus for its 8-bit conversion results.
No. The ADS8345E/2K5 is supplied in a 20-pin SSOP package, while the ADS830EG4 is supplied in a 20-pin TSSOP package. Pin functions and PCB land patterns differ, so they are not direct drop-in replacements.
The ADS8345E/2K5 is suited to multi-channel, medium-speed data acquisition such as industrial process control and portable instrumentation. The ADS830EG4 is intended for high-speed, single-channel signal digitization such as video processing, imaging, and communications receivers.
Both the ADS8345E/2K5 and the ADS830EG4 are specified for the industrial temperature range of -40°C to +85°C.