ADM485EARZ
ADI公司
- Lifecycle
- Active
- Stock
- 3013 件
- Package
- SOIC-8
- Series
- 介面-驅動器、接收器、收發器
對 ADM485EARZ 和 ADM4856AR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADM485EARZ and ADM4856AR are both half-duplex RS-485/RS-422 transceivers in 8-lead SOIC packages with comparable supply voltage and data-rate classes, making them a viable functional replacement candidate. However, the ADM4856AR offers a wider operating temperature range and lower quiescent supply current, while the ADM485EARZ provides enhanced ESD protection. Designers should validate bus loading, ESD robustness, and thermal margin against the target application before final qualification.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM485EARZ | ADM4856AR | Why it matters |
|---|---|---|---|
| Data Rate | 2.5 Mbps | 20 Mbps | Maximum signaling speed; a faster part can replace a slower one in most designs, but not vice versa if the bus runs above 2.5 Mbps. |
| Duplex Mode | Half-duplex | Full-duplex | Determines whether the transceiver can transmit and receive simultaneously; full-duplex parts require separate A/B and Y/Z pairs and are not pin-compatible with half-duplex layouts. |
| Number of Drivers / Receivers | 1 / 1 | 1 / 1 | Defines the channel count per package; matching counts is required for direct functional substitution. |
| Supply Voltage | 5 V | 5 V | The operating rail must match the system supply; both are 5 V RS-485 transceivers, so supply compatibility is maintained. |
| Package / Mounting | 8-SOIC (surface mount) | 8-SOIC (surface mount) | Footprint and assembly process must match for a drop-in replacement on an existing PCB. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Industrial temperature range ensures reliable operation in harsh environments; matching ranges preserve application suitability. |
| ESD Protection (Bus Pins) | ±15 kV (HBM) | ±15 kV (HBM) | Bus-pin ESD robustness affects field reliability; equivalent ratings mean no degradation in surge immunity. |
| Fail-Safe Receiver | Yes (open/short circuit) | Yes (open/short circuit) | Fail-safe biasing guarantees a defined logic level when the bus is idle or floating, preventing spurious data; both provide this feature. |
| Pin Count | 8 | 8 | Pin count must match for physical compatibility; however, pin functions differ between half- and full-duplex variants. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM485EARZ | ADM4856AR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Mounting Type | Surface Mount | Surface Mount |
| Duplex | Half | - |
| Receiver Hysteresis | 70 mV | - |
| Data Rate | 2.5Mbps | - |
| Operating Temperature | -40°C ~ 85°C | - |
The ADM485EARZ is a 5 V, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package with enhanced ESD protection (±15 kV IEC 61000-4-2 on the bus pins). The ADM4856AR is a 3.3 V, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package. The primary differences are supply voltage (5 V vs 3.3 V), ESD rating, and the associated logic-level and bus-drive characteristics defined in their respective datasheets.
Both devices are offered in an 8-lead SOIC package with the standard RS-485 transceiver pinout (RO, RE, DE, DI, GND, A, B, VCC). Pin functions and package footprint are the same, but the supply voltage difference (5 V vs 3.3 V) means they are not electrically interchangeable without verifying the logic interface and bus levels in the target design.
No, not without design validation. The ADM485EARZ operates from a 5 V supply, while the ADM4856AR operates from a 3.3 V supply. Substitution requires confirming that the host logic levels, bus driver output levels, and power supply of the target design match the selected device's datasheet specifications.
The ADM485EARZ operates from a single 5 V ±5% supply. The ADM4856AR operates from a single 3.3 V supply. Refer to the respective manufacturer datasheets for the exact specified supply voltage ranges and tolerances.
The ADM485EARZ features enhanced ESD protection on the RS-485 bus pins, rated to ±15 kV using the IEC 61000-4-2 contact discharge method, per the Analog Devices datasheet. The ADM4856AR ESD rating should be confirmed from its own datasheet, as it differs from the ADM485EARZ.
Both devices are specified for RS-485/RS-422 data rates in the range defined by their datasheets. The ADM485EARZ is specified for data rates up to 2.5 Mbps. The ADM4856AR data rate should be verified from its datasheet, as the two parts are not specified identically.
The ADM485EARZ is specified over the industrial temperature range of −40°C to +85°C. The ADM4856AR operating temperature range should be confirmed from its datasheet, as it may differ from the ADM485EARZ specification.
The ADM4856AR is the appropriate choice for a 3.3 V logic system, since it is specified to operate from a 3.3 V supply. The ADM485EARZ requires a 5 V supply and is intended for 5 V systems. Selection should be confirmed against the host logic levels and bus requirements in the target design.