ADM485EARZ
ADI公司
- Lifecycle
- Active
- Stock
- 3013 件
- Package
- SOIC-8
- Series
- 介面-驅動器、接收器、收發器
對 ADM485EARZ 和 ADM4850AR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADM485EARZ and ADM4850AR are both half-duplex RS-485/RS-422 transceivers in 8-lead SOIC packages with comparable supply voltage and data-rate classes, making the ADM4850AR a viable functional substitute for the ADM485EARZ in many designs. However, the two parts differ in ESD protection level, fail-safe receiver behavior, and specified operating temperature range, so the replacement should be validated against the target application's robustness and environmental requirements before adoption.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM485EARZ | ADM4850AR | Why it matters |
|---|---|---|---|
| Data Rate | 2.5 Mbps | 250 kbps | Determines the maximum communication speed the transceiver can support; a faster part can replace a slower one in most designs but not vice versa. |
| Duplex Mode | Half-duplex | Half-duplex | Defines whether the device can transmit and receive simultaneously; both are half-duplex, so bus topology compatibility is preserved. |
| Number of Drivers/Receivers | 1/1 | 1/1 | Indicates the transceiver channel count; matching 1/1 configuration ensures direct functional substitution on a single RS-485 bus. |
| Supply Voltage | 5 V | 5 V | Both operate from a 5 V rail, so the same power supply design can be reused without modification. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Confirms both parts are rated for industrial temperature environments, ensuring reliability under the same operating conditions. |
| ESD Protection (Bus Pins) | ±15 kV (HBM) | ±15 kV (HBM) | Higher ESD tolerance improves robustness in harsh field environments; matching ratings mean equivalent protection levels. |
| Fail-Safe Receiver | Yes (open/short circuit) | Yes (open/short circuit) | Fail-safe receivers guarantee a defined logic output when the bus is idle or floating, preventing spurious data in multi-node networks. |
| Package / Mounting | 8-SOIC (Surface Mount) | 8-SOIC (Surface Mount) | Identical package and footprint allow drop-in replacement on the same PCB without layout changes. |
| Driver Output Voltage (Loaded) | 2.0 V min (54 Ω load) | 2.0 V min (54 Ω load) | Ensures adequate differential signal amplitude for reliable RS-485 communication over long cables; matching values confirm equivalent drive strength. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM485EARZ | ADM4850AR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Mounting Type | Surface Mount | Surface Mount |
| Duplex | Half | - |
| Receiver Hysteresis | 70 mV | - |
| Data Rate | 2.5Mbps | - |
| Operating Temperature | -40°C ~ 85°C | - |
The ADM485EARZ is a 5 V, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package with enhanced ESD protection (±15 kV IEC 61000-4-2 on bus pins) and a data rate up to 5 Mbps. The ADM4850AR is a 5 V, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package with a data rate up to 2.5 Mbps and standard ESD protection. The ADM485EARZ is a newer enhanced-ESD variant, while the ADM4850AR is an older standard variant.
Yes. Both devices are offered in an 8-lead SOIC package with the same pinout (RO, RE, DE, DI, GND, A, B, VCC), so they are pin-compatible and share the same PCB land pattern.
In most cases yes, because both are 5 V half-duplex RS-485 transceivers in the same 8-lead SOIC package with identical pin functions. However, the ADM485EARZ supports a higher data rate (up to 5 Mbps vs. 2.5 Mbps) and offers enhanced ESD protection, so the replacement should be validated against the target design's data rate, bus loading, and ESD requirements using the respective manufacturer datasheets.
The ADM485EARZ supports data rates up to 5 Mbps. The ADM4850AR supports data rates up to 2.5 Mbps.
The ADM485EARZ provides enhanced ESD protection of ±15 kV using the IEC 61000-4-2 Air-Gap Discharge method and ±8 kV using the IEC 61000-4-2 Contact Discharge method on the RS-485 bus pins. The ADM4850AR provides standard ESD protection; designers should consult the ADM4850AR datasheet for its specified ESD ratings before relying on a particular level.
Yes. Both the ADM485EARZ and ADM4850AR are specified for operation from a single 5 V supply and are half-duplex RS-485/RS-422 transceivers.
Both devices are available in an 8-lead SOIC package (the "RZ" and "AR" suffixes denote the SOIC package option).
The ADM485EARZ is the appropriate choice when data rates up to 5 Mbps and enhanced ±15 kV IEC 61000-4-2 ESD protection on the bus pins are required. The ADM4850AR is limited to 2.5 Mbps and standard ESD protection, so it is better suited to lower-speed applications where enhanced ESD robustness is not needed.