AD8421BRZ
ADI公司
- Lifecycle
- Active
- Stock
- 1263 件
- Package
- SOIC-8
- Series
- 線性放大器-儀器、運算放大器、緩衝放大器
對 AD8421BRZ 和 AD8422BRZ-RL 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD8422BRZ-RL is a viable functional replacement candidate for the AD8421BRZ in many instrumentation amplifier applications, sharing the same SOIC-8 footprint, unity-gain-stable architecture, and comparable supply range. However, the AD8422 offers lower bandwidth and a different noise and distortion profile, so gain-bandwidth-sensitive or wideband precision designs should be validated against the original AD8421 specifications before substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8421BRZ | AD8422BRZ-RL | Why it matters |
|---|---|---|---|
| Gain Bandwidth Product (GBP) | 10 MHz | 2.2 MHz | Determines the maximum frequency at which the amplifier can provide useful gain; a higher GBP supports wider-bandwidth signal conditioning. |
| Input Voltage Noise (1 kHz) | 3 nV/√Hz | 8 nV/√Hz | Lower input voltage noise improves resolution for low-level signals, which is critical in precision sensor and instrumentation front ends. |
| Input Offset Voltage (max) | 60 µV | 70 µV | Offset voltage directly adds DC error to the measured signal; tighter offset improves absolute accuracy in high-gain applications. |
| Supply Current per Amplifier (typ) | 2.3 mA | 0.3 mA | Quiescent current affects power budget and thermal load, especially important for portable and battery-powered instrumentation. |
| CMRR (DC to 60 Hz, G=1000) | 134 dB | 126 dB | Common-mode rejection ratio determines how well the amplifier rejects interfering common-mode signals; higher CMRR yields better noise immunity. |
| Input Bias Current (max) | 1 nA | 0.5 nA | Low bias current minimizes errors when interfacing with high-impedance sources such as sensors and electrode arrays. |
| Slew Rate | 35 V/µs | 0.8 V/µs | Slew rate limits how fast the output can respond to large signal steps; higher slew rate supports faster transient and pulse measurements. |
| Supply Voltage Range | ±2.5 V to ±18 V | ±2.3 V to ±18 V | The usable supply range determines compatibility with system rails and headroom for signal swing in single- or dual-supply designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The rated temperature range confirms suitability for industrial and commercial environments and ensures specified performance over temperature. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Matching package and pinout enables drop-in board-level substitution without layout changes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8421BRZ | AD8422BRZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Output Type | - | Rail-to-Rail |
| Slew Rate | 35V/µs | 0.8V/µs |
| -3 dB Bandwidth | 10 MHz | 2.2 MHz |
| Current - Input Bias | 100 pA | 200 pA |
| Voltage - Input Offset | 25 µV | 25 µV |
| Supply Current | 2mA | 300µA |
| Current - Output / Channel | 65 mA | 20 mA |
| Voltage - Supply Span(Min) | 5 V | 4.6 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8421BRZ is a low-power, low-noise instrumentation amplifier with a typical supply current of 2.3 mA and a typical input voltage noise of 3 nV/√Hz at 1 kHz, offered in an 8-lead SOIC package. The AD8422BRZ-RL is a lower-power instrumentation amplifier with a typical supply current of 300 µA and a typical input voltage noise of 8 nV/√Hz at 1 kHz, supplied in an 8-lead SOIC package in tape-and-reel format. The AD8421BRZ targets higher bandwidth and lower noise, while the AD8422BRZ-RL targets lower power consumption.
Both devices are offered in an 8-lead SOIC package with the standard instrumentation amplifier pinout (gain-setting resistor pins, inverting and non-inverting inputs, reference, output, and supply pins). Designers should confirm the exact package outline and land pattern against the respective manufacturer datasheets before substituting one for the other on an existing PCB.
The AD8421BRZ has a typical supply current of 2.3 mA, whereas the AD8422BRZ-RL has a typical supply current of 300 µA. The AD8422BRZ-RL is therefore better suited to battery-powered or power-constrained designs, while the AD8421BRZ trades higher supply current for lower voltage noise and higher bandwidth.
The AD8421BRZ specifies a typical input voltage noise of 3 nV/√Hz at 1 kHz, while the AD8422BRZ-RL specifies a typical input voltage noise of 8 nV/√Hz at 1 kHz. For low-level signal amplification where noise performance is critical, the AD8421BRZ provides the lower noise floor.
Both the AD8421BRZ and AD8422BRZ-RL use a single external gain-setting resistor to program gain, supporting gains from 1 to 1000. The gain equation and resistor value selection should be taken from the respective manufacturer datasheets, as the internal resistor values differ between the two devices.
Not without validation. Although both are 8-lead SOIC instrumentation amplifiers, they differ in supply current, noise, bandwidth, and gain-setting resistor values. A substitution requires verifying that the lower bandwidth and higher noise of the AD8422BRZ-RL meet the application requirements and that the gain resistor is recalculated per its datasheet.
The -RL suffix indicates that the AD8422BRZ-RL is supplied in tape-and-reel packaging, which is intended for automated high-volume PCB assembly. The AD8421BRZ is typically supplied in standard tube or tray packaging; the electrical performance of the device is not changed by the packaging suffix.