AD8422ARZ vs AD8421BRZ

對 AD8422ARZ 和 AD8421BRZ 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8422ARZ is a viable functional replacement candidate for the AD8421BRZ in many instrumentation amplifier applications, sharing the same pinout, package, and gain-setting architecture. However, designers must validate noise performance, bandwidth, and gain accuracy against their specific requirements, since the AD8421BRZ offers lower voltage noise and higher bandwidth while the AD8422ARZ trades some of that performance for lower power consumption.

Package and Pinout High match
Gain Configuration High match
Noise Density Validation required
Bandwidth and Slew Rate Validation required

Parts at a glance

Part A

AD8422ARZ

ADI公司

Lifecycle
Active
Stock
3872 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器
Part B

AD8421BRZ

ADI公司

Lifecycle
Active
Stock
1263 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8421BRZ AD8422ARZ Why it matters
Gain Bandwidth Product (GBP) 10 MHz 2.2 MHz Determines the maximum frequency at which the amplifier can provide useful gain; a higher GBP supports wider-bandwidth signal conditioning.
Input Voltage Noise (1 kHz) 3 nV/√Hz 8 nV/√Hz Lower input voltage noise improves signal-to-noise ratio for low-level sensor signals, which is critical in precision measurement front ends.
Input Offset Voltage (max) 60 µV 70 µV Offset voltage directly adds DC error to the amplified signal; tighter offset specs reduce the need for calibration in precision applications.
Supply Current per Amplifier 2.3 mA 0.3 mA Lower supply current enables battery-powered and low-power designs; the AD8422 is significantly more power-efficient.
CMRR (Gain = 1000, DC to 60 Hz) 120 dB 130 dB High common-mode rejection suppresses interference and ground noise; the AD8422 offers superior rejection for noisy environments.
Gain Range 1 to 10000 1 to 1000 Defines the maximum amplification achievable; the AD8421 supports higher gain settings for very small signals.
Input Bias Current (max) 1 nA 0.5 nA Low bias current minimizes errors with high-impedance sources; the AD8422 is better suited for high-source-impedance sensors.
Slew Rate 35 V/µs 0.8 V/µs Slew rate limits large-signal bandwidth and transient response; the AD8421 handles faster-changing signals.
Operating Temperature Range -40°C to +85°C -40°C to +125°C Wider temperature range supports harsh-environment and industrial applications; the AD8422 is rated for higher ambient temperatures.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8422ARZ AD8421BRZ
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Output Type Rail-to-Rail -
Slew Rate 0.8V/µs 35V/µs
-3 dB Bandwidth 2.2 MHz 10 MHz
Current - Input Bias 500 pA 100 pA
Voltage - Input Offset 60 µV 25 µV
Supply Current 300µA 2mA
Current - Output / Channel 20 mA 65 mA
Voltage - Supply Span(Min) 4.6 V 5 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8421BRZ and AD8422ARZ instrumentation amplifiers?

The AD8421BRZ is a high-speed, low-power instrumentation amplifier with a gain bandwidth product of 10 MHz and a slew rate of 35 V/µs, housed in an 8-lead SOIC package. The AD8422ARZ is a lower-power, precision instrumentation amplifier with a gain bandwidth product of 2.2 MHz and a slew rate of 0.8 V/µs, also in an 8-lead SOIC package. The AD8421BRZ offers higher bandwidth and faster settling, while the AD8422ARZ targets lower power consumption and higher DC precision.

Are the AD8421BRZ and AD8422ARZ pin-compatible?

Yes, both devices are offered in an 8-lead SOIC package with the same pinout, allowing them to share a common PCB footprint. However, designers must verify that the electrical performance differences (bandwidth, supply current, noise, and gain range) are acceptable for the target application before substituting one for the other.

How do the supply current requirements of the AD8421BRZ and AD8422ARZ compare?

The AD8421BRZ typically draws approximately 2.3 mA of supply current, while the AD8422ARZ typically draws approximately 0.3 mA. The AD8422ARZ is therefore better suited for low-power, battery-operated, or portable designs, whereas the AD8421BRZ trades higher supply current for greater bandwidth and faster dynamic response.

Which device offers better noise performance, the AD8421BRZ or the AD8422ARZ?

The AD8421BRZ specifies an input voltage noise density of approximately 3 nV/√Hz at 1 kHz, while the AD8422ARZ specifies approximately 8 nV/√Hz at 1 kHz. For low-level signal amplification where noise floor is critical, the AD8421BRZ provides superior noise performance.

What are the gain bandwidth products of the AD8421BRZ and AD8422ARZ?

The AD8421BRZ has a gain bandwidth product of 10 MHz, and the AD8422ARZ has a gain bandwidth product of 2.2 MHz. The higher gain bandwidth of the AD8421BRZ supports wider signal bandwidth at a given gain setting, making it preferable for high-speed signal conditioning applications.

Can the AD8422ARZ be used as a drop-in replacement for the AD8421BRZ in high-speed applications?

No. Although the two devices are pin-compatible in the 8-lead SOIC package, the AD8422ARZ has a significantly lower gain bandwidth product (2.2 MHz versus 10 MHz) and slew rate (0.8 V/µs versus 35 V/µs). In high-speed applications requiring the bandwidth or transient response of the AD8421BRZ, the AD8422ARZ would not meet the same performance requirements.

What are the input offset voltage specifications for the AD8421BRZ and AD8422ARZ?

The AD8421BRZ specifies a maximum input offset voltage of 60 µV (B grade), while the AD8422ARZ specifies a maximum input offset voltage of 150 µV (A grade). For DC precision applications, the AD8421BRZ offers a tighter offset voltage limit, though the AD8422ARZ remains suitable for many precision signal-chain designs.

Which device is better suited for low-power portable instrumentation?

The AD8422ARZ is better suited for low-power portable instrumentation because its typical supply current of approximately 0.3 mA is substantially lower than the approximately 2.3 mA of the AD8421BRZ. The reduced power consumption of the AD8422ARZ extends battery life, while the AD8421BRZ is preferable when higher bandwidth and faster settling are required.