AD8014ARZ vs AD8018AR

對 AD8014ARZ 和 AD8018AR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8014ARZ and AD8018AR are both high-speed current-feedback operational amplifiers from Analog Devices in an 8-lead SOIC package, sharing a similar supply voltage range and bandwidth class. However, they differ in output drive capability and quiescent current, so the AD8018AR should be validated against the AD8014ARZ for load-driving and power-budget requirements before substitution.

Amplifier Topology High match
Package Type High match
Output Drive Capability Validation required
Quiescent Current Validation required

Parts at a glance

Part A

AD8014ARZ

ADI公司

Lifecycle
Active
Stock
1208 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器
Part B

AD8018AR

ADI公司

Lifecycle
Active
Stock
6539 件
Package
SOIC-8
Series
介面-驅動器、接收器、收發器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8014ARZ AD8018AR Why it matters
Number of Amplifiers 1 2 Channel count determines how many independent signal paths can be processed; a dual amplifier cannot directly replace a single in a single-channel layout without unused channels.
-3 dB Bandwidth 400 MHz 100 MHz Bandwidth sets the maximum signal frequency the amplifier can handle with acceptable gain; a large difference affects high-speed signal fidelity.
Slew Rate 4000 V/µs 350 V/µs Slew rate limits how fast the output can respond to large signal swings; lower slew rate can cause distortion on fast transients.
Supply Voltage Range 4.5 V to 12 V (±2.25 V to ±6 V) 3 V to 10 V (±1.5 V to ±5 V) The allowable supply range must cover the system rail voltages; mismatched ranges can prevent operation or risk damage.
Supply Current per Amplifier 1.15 mA 9 mA Quiescent current affects power budget and thermal design; a much higher current draw may exceed the original power envelope.
Input Voltage Noise Density 2.5 nV/√Hz 5 nV/√Hz Lower noise density improves signal-to-noise ratio in low-level signal applications; higher noise can degrade sensitivity.
Output Current (Typical) 50 mA 150 mA Output drive capability determines the load the amplifier can drive; insufficient drive can cause clipping into low-impedance loads.
Package Type 8-Lead SOIC 8-Lead SOIC Package footprint and pinout must match for board-level interchangeability; identical package type supports drop-in replacement.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C The temperature range must cover the application environment; matching ranges ensure equivalent environmental robustness.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8014ARZ AD8018AR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type - Driver
Protocol - xDSL
Number of Drivers/Receivers - 2/0
Voltage - Supply - 3.3V ~ 8V
Mounting Type Surface Mount Surface Mount
Amplifier Type Current Feedback -
Number of Circuits 1 -
Slew Rate 4600V/µs -
-3 dB Bandwidth 480 MHz -
Current - Input Bias 5 µA -
Voltage - Input Offset 2 mV -
Supply Current 1.15mA -
Current - Output / Channel 50 mA -
Voltage - Supply Span(Min) 4.5 V -
Voltage - Supply Span(Max) 12 V -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the primary differences between the AD8014ARZ and the AD8018AR?

The AD8014ARZ is a single, low-power, high-speed current-feedback operational amplifier specified for +5 V or ±5 V operation, while the AD8018AR is a dual, high-output-current line driver optimized for xDSL and similar applications, typically operating from a single +5 V supply. The AD8014ARZ comes in an 8-lead SOIC package, and the AD8018AR is offered in an 8-lead SOIC package as well, but the two devices differ in channel count, intended application, and output drive characteristics.

Can the AD8014ARZ be used as a direct drop-in replacement for the AD8018AR?

No. The AD8014ARZ is a single amplifier and the AD8018AR is a dual amplifier, so the pin functions and channel count differ. A direct drop-in substitution is not possible without verifying pinout, supply configuration, and application requirements against the respective manufacturer datasheets.

What are the supply voltage requirements for the AD8014ARZ and AD8018AR?

The AD8014ARZ is specified for operation on +5 V single supply or ±5 V dual supplies. The AD8018AR is specified for a single +5 V supply. Designers should confirm exact supply ranges and absolute maximum ratings in the official Analog Devices datasheets before use.

Which device is better suited for xDSL line driving applications?

The AD8018AR is specifically designed as a dual high-output-current line driver for xDSL and similar communications applications, making it the more appropriate choice for line-driving duties. The AD8014ARZ is a general-purpose single high-speed current-feedback amplifier and is not positioned as a dedicated xDSL line driver.

Do the AD8014ARZ and AD8018AR use the same package and pinout?

Both devices are available in 8-lead SOIC packages, but they do not share the same pinout because the AD8014ARZ is a single amplifier and the AD8018AR is a dual amplifier. PCB layouts must be designed according to each device's specific datasheet pin configuration.

What is the difference in channel count between the AD8014ARZ and AD8018AR?

The AD8014ARZ contains one operational amplifier (single), while the AD8018AR contains two operational amplifiers (dual). This difference affects board space, power consumption, and circuit topology in multi-channel designs.

Are the AD8014ARZ and AD8018AR both current-feedback amplifiers?

The AD8014ARZ is a current-feedback operational amplifier. The AD8018AR is a dual high-output-current amplifier intended for line-driving applications; designers should consult the official Analog Devices datasheet to confirm its internal amplifier topology before assuming current-feedback behavior.