AD8014ARZ vs AD8010AR-16

對 AD8014ARZ 和 AD8010AR-16 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD8014ARZ and AD8010AR-16 are not drop-in replacements for one another. The AD8014ARZ is a single-channel, low-power current-feedback amplifier in an 8-lead SOIC package, while the AD8010AR-16 is a high-current, dual-channel current-feedback amplifier in a 16-lead SOIC package. Their channel count, package footprint, supply current, and output drive capability differ substantially, so substituting one for the other requires board redesign and validation of the target application's signal chain.

Different channel count Different package footprint Different supply current Different output drive

Parts at a glance

Part A

AD8014ARZ

ADI公司

Lifecycle
Active
Stock
1208 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器
Part B

AD8010AR-16

ADI公司

Lifecycle
Active
Stock
7478 件
Package
SOIC-16
Series
線性放大器-儀器、運算放大器、緩衝放大器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8014ARZ AD8010AR-16 Why it matters
Amplifier Type Current Feedback Current Feedback Both are current-feedback op-amps, so the feedback topology and compensation approach are compatible for substitution.
-3 dB Bandwidth 400 MHz 230 MHz Bandwidth determines the maximum signal frequency the amplifier can handle with acceptable gain flatness; a lower-bandwidth part may not meet high-speed signal requirements.
Slew Rate 4000 V/µs 800 V/µs Slew rate limits how fast the output can respond to large signal steps; a significantly lower slew rate can cause distortion in fast, large-signal applications.
Supply Voltage (Min–Max) ±4.5 V to ±6 V (9 V to 12 V) ±5 V to ±15 V (10 V to 30 V) The usable supply range must cover the system rail voltages; the AD8010 supports a wider range, while the AD8014 is limited to lower supplies.
Supply Current (per amplifier) 1.1 mA typ 15 mA typ Quiescent current affects power budget and thermal design; the AD8010 draws substantially more current, which may be unacceptable in low-power designs.
Output Current 50 mA typ 200 mA typ Output drive capability determines the load the amplifier can drive; the AD8010 can drive heavier loads such as cables or low-impedance loads.
Input Offset Voltage 5 mV max 10 mV max Offset voltage contributes DC error at the output; a larger offset may require trimming or calibration in precision DC applications.
Package / Pin Count 8-Lead SOIC 16-Lead SOIC Different package and pin count means the parts are not drop-in footprint compatible; a board redesign or adapter would be required.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Both cover the industrial temperature range, so environmental compatibility is equivalent for typical industrial applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8014ARZ AD8010AR-16
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Amplifier Type Current Feedback Current Feedback
Number of Circuits 1 1
Slew Rate 4600V/µs 800V/µs
-3 dB Bandwidth 480 MHz 230 MHz
Current - Input Bias 5 µA 10 µA
Voltage - Input Offset 2 mV 5 mV
Supply Current 1.15mA 15.5mA
Current - Output / Channel 50 mA 200 mA
Voltage - Supply Span(Min) 4.5 V 9 V
Voltage - Supply Span(Max) 12 V 12 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the AD8014ARZ and AD8010AR-16?

The AD8014ARZ is a single, low-power, high-speed current-feedback operational amplifier supplied in an 8-lead SOIC package, while the AD8010AR-16 is a triple, high-speed current-feedback amplifier supplied in a 16-lead SOIC package. The AD8014ARZ is optimized for single-channel signal chains with low quiescent current, whereas the AD8010AR-16 integrates three amplifiers for multi-channel applications such as RGB video processing.

Are the AD8014ARZ and AD8010AR-16 pin-compatible?

No. The AD8014ARZ uses an 8-lead SOIC (R-8) package, and the AD8010AR-16 uses a 16-lead SOIC (R-16) package. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for one another.

Can the AD8014ARZ be substituted for the AD8010AR-16 in an existing design?

No direct substitution is possible. The AD8014ARZ is a single amplifier in an 8-lead package, while the AD8010AR-16 contains three amplifiers in a 16-lead package. A redesign of the PCB layout and signal chain would be required, and the design must be revalidated against the respective datasheets.

What are the supply voltage and quiescent current specifications for these amplifiers?

Both devices are current-feedback amplifiers intended for ±5 V nominal operation (with specified operating ranges per their datasheets). The AD8014ARZ is specified for low quiescent current suitable for single-channel, power-sensitive designs, while the AD8010AR-16 integrates three amplifiers, so its total quiescent current is higher. Exact limits should be taken from the respective Analog Devices datasheets.

Which device is better suited for multi-channel video applications?

The AD8010AR-16 is better suited for multi-channel video applications because it integrates three high-speed current-feedback amplifiers in a single 16-lead SOIC package, which is convenient for RGB signal chains. The AD8014ARZ is a single amplifier and would require three separate devices for the same function.

Do both parts use current-feedback architecture?

Yes. Both the AD8014ARZ and AD8010AR-16 are current-feedback operational amplifiers from Analog Devices, which provides high slew rate and bandwidth characteristics suited to high-speed signal processing. Designers should confirm gain-setting resistor values and stability requirements from each device's datasheet.

What package and mounting type do these components use?

Both are surface-mount SOIC devices. The AD8014ARZ is supplied in an 8-lead SOIC, and the AD8010AR-16 is supplied in a 16-lead SOIC. The "ARZ" and "AR-16" suffixes denote the SOIC package and, for the AD8014ARZ, the RoHS-compliant Z grade per Analog Devices nomenclature.