AD7495BRZ
ADI公司
- Lifecycle
- Active
- Stock
- 2494 件
- Package
- SOIC-8
- Series
- 資料獲取-模數轉換器(ADC)
對 AD7495BRZ 和 AD7492BR-5 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD7495BRZ and AD7492BR-5 are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible SOIC-24 footprint and parallel interface architecture, making the AD7495BRZ a viable functional replacement candidate for the AD7492BR-5 in many designs. However, the two parts differ in analog supply voltage range and achievable throughput, so the replacement should be validated against the target system's supply rail and sampling-rate requirements before adoption.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7495BRZ | AD7492BR-5 | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both converters provide 12-bit resolution, so quantization accuracy is equivalent for signal-chain design. |
| Sampling Rate | 1 MSPS | 400 kSPS | The AD7495 supports a much higher throughput, which matters for wideband or fast-settling acquisition systems. |
| Number of Input Channels | 1 (single-ended) | 1 (single-ended) | Both are single-channel devices, so channel-count requirements are identical for either part. |
| Supply Voltage | 5 V single supply | 5 V single supply | Identical supply requirements allow either part to be used in the same 5 V rail design. |
| Interface Type | SPI / QSPI / MICROWIRE / DSP compatible serial | Parallel (byte/word) | The interface differs fundamentally: the AD7495 uses a serial bus while the AD7492 uses a parallel bus, affecting pinout, PCB routing, and host controller selection. |
| Package / Pin Count | 8-lead SOIC | 24-lead SOIC | Different package sizes and pin counts mean the parts are not footprint-compatible and require different board layouts. |
| Power Consumption | ~4.5 mW typical at 1 MSPS | ~15 mW typical | Lower power in the AD7495 benefits battery-powered and thermally constrained designs. |
| Integral Nonlinearity (INL) | ±1 LSB max | ±1 LSB max | Equivalent INL specifications indicate comparable DC linearity performance for precision measurement applications. |
| Reference Type | Internal reference | Internal reference | Both integrate an on-chip reference, simplifying system design and reducing external component count. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7495BRZ | AD7492BR-5 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | 1.25M |
| Data Interface | SPI, DSP | Parallel |
| Number of A/D Converters | 1 | 1 |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Number of Inputs | 1 | - |
| Input Type | Single Ended | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | SAR | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
The AD7495BRZ is a 12-bit successive-approximation ADC that operates from a single 2.7 V to 5.25 V supply and includes an on-chip reference, while the AD7492BR-5 is a 12-bit SAR ADC specified for a 5 V supply that requires an external reference. Both are offered in 24-lead SOIC packages, but their reference architecture and supply requirements differ.
Yes. Both devices are 12-bit successive-approximation ADCs with a maximum throughput rate of 1 MSPS, making them comparable in resolution and conversion speed.
Not without validation. The AD7495BRZ integrates an internal reference and supports a 2.7 V to 5.25 V supply range, whereas the AD7492BR-5 is a 5 V device requiring an external reference. Reference configuration, supply voltage, and associated external components must be verified against the datasheets before any substitution.
The AD7495BRZ operates from a single supply of 2.7 V to 5.25 V. The AD7492BR-5 is specified for operation from a 5 V supply.
The AD7495BRZ includes an on-chip reference, reducing external component count. The AD7492BR-5 does not include an internal reference and requires an external reference voltage to be applied for conversion.
Both devices are offered in a 24-lead SOIC package, which supports similar PCB footprint considerations, though pin functions and external connections should be confirmed from the respective datasheets.
Both ADCs provide a serial digital interface for connection to microcontrollers and DSPs, supporting straightforward integration into embedded data-acquisition systems.