AD7495BRZ
ADI公司
- Lifecycle
- Active
- Stock
- 2494 件
- Package
- SOIC-8
- Series
- 資料獲取-模數轉換器(ADC)
對 AD7495BRZ 和 AD7492BR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD7495BRZ and AD7492BR are both 12-bit successive-approximation ADCs from Analog Devices in a 24-lead SOIC package, sharing a compatible serial interface and reference architecture. While the AD7495BRZ offers a faster 1 MSPS throughput versus the AD7492BR at 400 kSPS, the two devices are functionally interchangeable in many designs where the higher conversion rate is not required. Engineers should validate timing margins and power budget against the target application before substituting.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7495BRZ | AD7492BR | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both converters provide 12-bit resolution, so quantization step size and achievable SNR are equivalent for a given input range. |
| Sampling Rate | 1 MSPS | 1.25 MSPS | The maximum throughput determines the highest signal bandwidth that can be digitized; the AD7492BR supports a higher conversion rate. |
| Number of Input Channels | 1 (single-ended) | 1 (single-ended) | Both are single-channel ADCs, so channel count does not differentiate them for multiplexed multi-signal applications. |
| Interface Type | SPI / QSPI / MICROWIRE / DSP compatible serial | Parallel (byte/word) | The digital interface must match the host controller; serial versus parallel output changes pin count, board routing, and firmware. |
| Supply Voltage | 5 V single supply | 5 V single supply | Both operate from a 5 V supply, so power rail requirements are compatible for direct substitution. |
| Analog Input Range | 0 V to 2.5 V (with 2.5 V reference) | 0 V to 2.5 V (with 2.5 V reference) | Matching input span ensures the same signal conditioning and reference circuitry can be reused. |
| Package / Pin Count | 8-lead SOIC | 24-lead SOIC | Different package footprints and pin counts prevent drop-in board replacement and require layout changes. |
| Power Consumption | Approx. 12 mW at 1 MSPS | Approx. 15 mW at 1.25 MSPS | Power draw affects thermal budget and supply sizing, especially in portable or densely packed designs. |
| Reference Type | External reference | External reference | Both require an external reference, so reference design and accuracy budgeting remain the same. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7495BRZ | AD7492BR |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | 1M |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | Internal |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD7495BRZ is a 12-bit successive-approximation ADC that operates from a single 2.7 V to 5.25 V supply and includes an on-chip reference, while the AD7492BR is a 12-bit SAR ADC specified for a single 5 V supply that requires an external reference. Both are offered in 8-lead SOIC packages, but their reference architecture and supply requirements differ.
Yes. Both devices are 12-bit successive-approximation ADCs with a maximum throughput rate of 1 MSPS, as specified in the Analog Devices datasheets for each part.
Not directly without design review. The AD7495BRZ integrates an internal reference and operates over a 2.7 V to 5.25 V supply range, whereas the AD7492BR requires an external reference and is specified for 5 V operation. Reference configuration, supply range, and associated external components must be validated before substitution.
The AD7495BRZ operates from a single supply of 2.7 V to 5.25 V. The AD7492BR is specified for a single 5 V supply. Designs should confirm the exact supply tolerance against the respective Analog Devices datasheet.
The AD7495BRZ includes an on-chip reference, reducing external component count. The AD7492BR does not include an internal reference and requires an external reference voltage to be applied for conversion. This difference affects bill of materials and PCB layout.
Both devices are offered in 8-lead SOIC packages. The "BRZ" and "BR" suffixes denote the SOIC package and temperature/performance grade per Analog Devices ordering conventions; designers should verify the exact package and grade from the manufacturer ordering guide.
Both ADCs provide a serial digital interface for connection to microcontrollers and DSPs, consistent with the Analog Devices datasheets for these 12-bit SAR converters. The exact timing and mode options should be confirmed from the respective datasheet.