74HCT08D
東芝電晶體與存儲
- Lifecycle
- Active
- Stock
- 6154 件
- Package
- SOIC-14
- Series
- 邏輯-門和逆變器
對 74HCT08D 和 74HCT245D,653 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The 74HCT08D and 74HCT245D,653 are not functionally interchangeable despite sharing the same 74HCT logic family and SOIC package. The 74HCT08D is a quad 2-input AND gate with four independent logic gates, while the 74HCT245D,653 is an octal bus transceiver with 3-state outputs and directional control. Their internal logic functions, pin configurations, channel counts, and output drive characteristics are fundamentally different, making direct substitution impossible without complete circuit redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT08D | 74HCT245D,653 | Why it matters |
|---|---|---|---|
| Logic Function | Quad 2-input AND gate | Octal bus transceiver with 3-state outputs | Defines the fundamental logic operation; the two devices perform completely different functions and are not functionally interchangeable. |
| Number of Channels | 4 | 8 | Determines how many independent signal paths can be processed simultaneously. |
| Output Type | Push-pull (totem-pole) | 3-state (tri-state) | 3-state outputs allow bus sharing and high-impedance disconnection, while push-pull outputs cannot be tied together on a shared bus. |
| Direction Control | None (unidirectional) | Direction pin (DIR) for A-to-B or B-to-A | Bidirectional control enables the transceiver to route data in either direction, which the AND gate cannot do. |
| Output Enable | Not applicable | Active-low output enable (OE) | Output enable allows the device to be placed in high-impedance state for bus arbitration and multiplexing. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both are HCT-family devices designed for 5 V TTL-compatible systems, so supply compatibility is identical. |
| Logic Family | HCT (High-speed CMOS, TTL compatible) | HCT (High-speed CMOS, TTL compatible) | Same logic family ensures compatible input thresholds and output drive characteristics. |
| Propagation Delay (typical) | Approximately 9 ns at 5 V | Approximately 12 ns at 5 V | Affects maximum operating speed and timing margins in synchronous designs. |
| Package | SO14 (14-pin SOIC) | SO20 (20-pin SOIC) | Different pin counts and footprints prevent direct PCB drop-in replacement. |
| Pin Count | 14 | 20 | Pin count determines board layout, routing, and mechanical compatibility. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT08D | 74HCT245D,653 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | 74HCT | 74HCT |
| Part Status | Obsolete | Active |
| Logic Type | AND Gate | Transceiver, Non-Inverting |
| Number of Elements | - | 1 |
| Number of Bits per Element | - | 8 |
| Output Type | - | 3-State |
| Current - Output High Low | 4mA, 4mA | 6mA, 6mA |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 4 | - |
| Number of Inputs | 2 | - |
| Current - Quiescent (Max) | 1 µA | - |
| Logic Level - Low | 0.8V | - |
| Logic Level - High | 2V | - |
| Max Propagation Delay @ V Max CL | 18ns @ 5.5V, 50pF | - |
The 74HCT08D contains four independent 2-input AND gates, while the 74HCT245D,653 is an octal bus transceiver with 3-state outputs. The 74HCT08D performs fixed logic AND operations, whereas the 74HCT245D,653 provides bidirectional data transfer between two buses with direction and output-enable control.
No. The 74HCT08D is a 14-pin SOIC device with four 2-input AND gates, while the 74HCT245D,653 is a 20-pin SOIC device with eight transceiver channels plus direction and output-enable pins. Their pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements.
Yes. Both devices are HCT-family logic parts specified for a 4.5 V to 5.5 V supply, with 5 V being the nominal operating voltage. They are not intended for 3.3 V-only logic systems without level-shifting considerations.
Both devices are specified with standard HCT-family output drive of ±4 mA at 5 V. The 74HCT245D,653 adds 3-state outputs and bus-oriented drive characteristics, but its per-channel DC output current rating is in the same standard logic range as the 74HCT08D.
Yes. The 74HCT245D,653 has 3-state outputs controlled by an output-enable pin, allowing its bus outputs to be placed in a high-impedance state for bus isolation. The 74HCT08D has standard totem-pole outputs and does not provide a high-impedance disable state.
The 74HCT245D,653 is the appropriate choice for bidirectional bus interfacing because it is an octal bus transceiver with direction control and 3-state outputs. The 74HCT08D is a fixed-function AND gate array and cannot perform bidirectional data transfer.
No. They differ in logic function, pin count, package footprint, and control features. Substitution would require redesigning the circuit to match the transceiver function, pinout, and 3-state control of the 74HCT245D,653 or the AND-gate function and 14-pin pinout of the 74HCT08D.
Both the 74HCT08D and the 74HCT245D,653 are typically specified for the standard industrial temperature range of -40 °C to +125 °C or -40 °C to +85 °C depending on the exact manufacturer suffix and datasheet. The specific temperature grade must be verified from the ordering code and manufacturer datasheet for each part.