74HCT08D vs 74HCT240D,653

對 74HCT08D 和 74HCT240D,653 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74HCT08D and 74HCT240D,653 are not functionally interchangeable despite sharing the same 74HCT logic family and SO14 package. The 74HCT08D provides four independent 2-input AND gates with active-high push-pull outputs, whereas the 74HCT240D,653 is an octal buffer/line driver with 3-state inverting outputs and dual active-low output enable pins. The differences in logic function, channel count, output type, and control interface make direct substitution impossible without redesigning the surrounding circuit.

Different logic function Different channel count Different output type Different control interface

Parts at a glance

Part A

74HCT08D

東芝電晶體與存儲

Lifecycle
Active
Stock
6154 件
Package
SOIC-14
Series
邏輯-門和逆變器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74HCT08D 74HCT240D,653 Why it matters
Logic Function Quad 2-input AND gate Octal 3-state inverting buffer/line driver The logic function determines the fundamental operation performed; these devices are not functionally interchangeable.
Number of Gates / Channels 4 8 Channel count affects how many independent signals can be processed per package.
Output Type Push-pull (totem-pole) 3-state (tri-state) 3-state outputs allow bus sharing and high-impedance disconnection, which push-pull outputs cannot provide.
Output Polarity Non-inverting Inverting Polarity determines whether the output logic level matches or is inverted relative to the input.
Number of Inputs per Channel 2 1 AND gates require two inputs per channel, whereas buffers have a single input per channel.
Propagation Delay (typical) ~11 ns at 4.5 V ~12 ns at 4.5 V Propagation delay affects timing margins in synchronous and high-speed digital circuits.
Output Drive Current (IOH/IOL) ±4 mA ±6 mA Drive current determines the ability to drive loads such as LEDs, other logic inputs, or transmission lines.
Package SO14 (14-pin SOIC) SO20 (20-pin SOIC) Package footprint and pin count must match the PCB layout for physical compatibility.
Pin Count 14 20 Pin count affects board layout, routing, and mechanical fit.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V Both devices operate from the same standard 5 V HCT logic supply range.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74HCT08D 74HCT240D,653
Supplier - Rochester Electronics, LLC
Series 74HCT Bulk
Logic Type AND Gate Active
Part Status Obsolete -
Number of Circuits 4 -
Number of Inputs 2 -
Voltage - Supply 4.5V ~ 5.5V -
Current - Quiescent (Max) 1 µA -
Current - Output High Low 4mA, 4mA -
Logic Level - Low 0.8V -
Logic Level - High 2V -
Max Propagation Delay @ V Max CL 18ns @ 5.5V, 50pF -
Operating Temperature -40°C ~ 85°C -
Mounting Type Surface Mount -

Frequently asked questions

What are the primary functional differences between the 74HCT08D and the 74HCT240D,653?

The 74HCT08D contains four independent 2-input AND gates, while the 74HCT240D,653 contains eight independent 3-state inverting buffers arranged as two 4-bit groups. The 74HCT08D performs logical AND operations, whereas the 74HCT240D,653 is designed for bus driving and signal buffering with high-impedance output capability.

Are the 74HCT08D and 74HCT240D,653 pin-compatible?

No. The 74HCT08D is typically supplied in a 14-pin SOIC package, while the 74HCT240D,653 is supplied in a 20-pin SOIC package. They have different pin counts, pin assignments, and PCB land patterns, so they are not drop-in replacements for each other.

Can the 74HCT08D and 74HCT240D,653 operate from the same supply voltage?

Yes. Both devices are members of the 74HCT logic family and are specified for a nominal supply voltage of 5 V, with a recommended operating range typically from 4.5 V to 5.5 V. However, always confirm the exact limits in the respective manufacturer datasheet.

Does the 74HCT240D,653 have 3-state outputs while the 74HCT08D does not?

Yes. The 74HCT240D,653 features 3-state outputs that can be placed in a high-impedance state via two active-low output enable pins, making it suitable for bus-oriented systems. The 74HCT08D has standard totem-pole outputs without 3-state capability.

What are the typical propagation delays for these two devices?

Both devices are HCT-family parts and typically exhibit propagation delays in the range of approximately 10 ns to 20 ns at 5 V, depending on load conditions and the specific manufacturer. For guaranteed limits, refer to the timing specifications in the official datasheet for each part number.

Are the 74HCT08D and 74HCT240D,653 interchangeable in a bus-driving application?

No. The 74HCT240D,653 is specifically designed for bus driving with 3-state outputs and higher output drive current, while the 74HCT08D provides AND gate logic with standard output drive. Substituting one for the other would change both the logic function and the bus interface behavior.

What logic function does each device implement?

The 74HCT08D implements four independent 2-input AND gates, where the output is HIGH only when both inputs are HIGH. The 74HCT240D,653 implements eight inverting buffers with 3-state outputs, where each output is the logical inverse of its input when enabled.

Do both devices have the same operating temperature range?

Both the 74HCT08D and 74HCT240D,653 are typically specified for the industrial temperature range of -40 °C to +125 °C or -40 °C to +85 °C, depending on the manufacturer and package variant. Verify the exact range in the specific manufacturer datasheet before use in extreme environments.