圖片僅供參考
X9C103S
+物料清單DIGITAL POT, 1 FUNC, 1
-
製造商Intersil Xicor分部
-
製造商部分 #X9C103S
-
有存貨3961
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Series | XDCP™ |
| Part Status | Active |
| Digi Key Programmable | Not Verified |
| Taper | Linear |
| Configuration | Potentiometer |
| Number of Circuits | 1 |
| Number of Taps | 100 |
| Resistance (Ohms) | 10k |
| Interface | Up/Down (U/D, INC, CS) |
| Memory Type | Non-Volatile |
| Voltage - Supply | 5V |
| Tolerance | ±20% |
| Temperature Coefficient (Typ) | ±300ppm/°C |
| Mounting Type | Surface Mount |
| Supplier Device Package | 8-SOIC |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Operating Temperature | 0°C ~ 70°C |
| Resistance - Wiper (Ohms) (Typ) | 40 |
| Packaging | Bulk |
概述
Equivalent
The X9C103S is a 100kΩ digital potentiometer. Equivalent products include:
- MCP401X series (Microchip)
- AD840X series (Analog Devices)
- MAX54XX series (Maxim Integrated)
- DS18XX series (Maxim Integrated)
- CAT51XX series (ON Semiconductor)
These alternatives offer similar digital control for resistance adjustments. Check datasheets for exact specs like voltage range, resolution, and interface compatibility.
- MCP401X series (Microchip)
- AD840X series (Analog Devices)
- MAX54XX series (Maxim Integrated)
- DS18XX series (Maxim Integrated)
- CAT51XX series (ON Semiconductor)
These alternatives offer similar digital control for resistance adjustments. Check datasheets for exact specs like voltage range, resolution, and interface compatibility.
Features
The X9C103S is a digitally controlled potentiometer (digipot) with the following key features:
- 100kΩ Resistance Range: Adjustable in 100 steps (1kΩ/step).
- Non-Volatile Memory: Saves wiper position on power-off.
- 3-Wire Serial Interface: Simple control via CS, U/D, and INC pins.
- Low Power Consumption: Typically 3mA operating current.
- Wide Voltage Range: ±5V (dual supply) or 0-10V (single supply).
- 100k Taps Endurance: High reliability for frequent adjustments.
- Compact Package: Available in 8-pin DIP/SOIC.
Ideal for volume control, calibration, and programmable voltage dividers.
- 100kΩ Resistance Range: Adjustable in 100 steps (1kΩ/step).
- Non-Volatile Memory: Saves wiper position on power-off.
- 3-Wire Serial Interface: Simple control via CS, U/D, and INC pins.
- Low Power Consumption: Typically 3mA operating current.
- Wide Voltage Range: ±5V (dual supply) or 0-10V (single supply).
- 100k Taps Endurance: High reliability for frequent adjustments.
- Compact Package: Available in 8-pin DIP/SOIC.
Ideal for volume control, calibration, and programmable voltage dividers.
Application
The X9C103S is a digitally controlled potentiometer (digipot) used for adjustable resistance in electronic circuits. Key application areas include:
1. Volume Control – Audio equipment like amplifiers and mixers.
2. Calibration & Tuning – Precision adjustments in sensors, oscillators, and filters.
3. Power Supplies – Voltage regulation and feedback control.
4. Industrial Automation – Process control and parameter adjustments.
5. Test & Measurement – Variable resistance in lab equipment.
6. Consumer Electronics – Brightness/contrast settings in displays.
Its compact size, digital interface (SPI/I²C), and non-volatile memory make it ideal for automated or remote-controlled systems.
1. Volume Control – Audio equipment like amplifiers and mixers.
2. Calibration & Tuning – Precision adjustments in sensors, oscillators, and filters.
3. Power Supplies – Voltage regulation and feedback control.
4. Industrial Automation – Process control and parameter adjustments.
5. Test & Measurement – Variable resistance in lab equipment.
6. Consumer Electronics – Brightness/contrast settings in displays.
Its compact size, digital interface (SPI/I²C), and non-volatile memory make it ideal for automated or remote-controlled systems.
Package
The X9C103S is a digitally controlled potentiometer (digipot) available in an 8-pin DIP (Dual In-line Package) or SOIC (Small Outline Integrated Circuit) package. It provides 100kΩ resistance with 100 tap points and is commonly used for adjustable resistance in electronic circuits. The package type ensures easy integration into breadboards or PCBs.
