圖片僅供參考
規格
| 屬性 | 價值 |
| Manufacturer | WEIKAI |
| Package | SSOP-20-208mil |
| Data Rate | 2Mbps |
| Interface | SPI |
| Voltage - Supply | 2.5V~5V |
| Operating Temperature | -45℃~+85℃ |
概述
Description
The WK2124-ISSG is a UART-to-SPI/I2C bridge IC designed by Nuvoton. It enables seamless communication between UART (serial) interfaces and SPI/I2C peripherals, simplifying embedded system designs.
### Key Features:
- Multi-protocol support: Converts UART to SPI (up to 10MHz) or I2C (up to 1MHz).
- Four UART channels: Supports independent baud rates (up to 3Mbps).
- Low power: Suitable for battery-powered applications.
- Compact package: Available in QFN-32 or LQFP-32.
### Applications:
- Industrial automation, IoT devices, and sensor hubs.
- Legacy system upgrades by bridging modern MCUs with older peripherals.
The WK2124-ISSG reduces MCU overhead, making it ideal for expanding I/O capabilities without additional GPIOs.
### Key Features:
- Multi-protocol support: Converts UART to SPI (up to 10MHz) or I2C (up to 1MHz).
- Four UART channels: Supports independent baud rates (up to 3Mbps).
- Low power: Suitable for battery-powered applications.
- Compact package: Available in QFN-32 or LQFP-32.
### Applications:
- Industrial automation, IoT devices, and sensor hubs.
- Legacy system upgrades by bridging modern MCUs with older peripherals.
The WK2124-ISSG reduces MCU overhead, making it ideal for expanding I/O capabilities without additional GPIOs.
Equivalent
The WK2124-ISSG is a 4-channel UART with SPI interface. Equivalent or similar products include:
- XR21V1414 (MaxLinear)
- SC16IS752 (NXP)
- MAX14830 (Analog Devices)
- EXAR XR17V354
These chips offer multi-channel UART functionality with SPI/I2C interfaces, suitable for serial communication expansion. Check pin compatibility and features for exact replacements.
- XR21V1414 (MaxLinear)
- SC16IS752 (NXP)
- MAX14830 (Analog Devices)
- EXAR XR17V354
These chips offer multi-channel UART functionality with SPI/I2C interfaces, suitable for serial communication expansion. Check pin compatibility and features for exact replacements.
Pinout
The WK2124-ISSG is a 4-channel UART (Universal Asynchronous Receiver/Transmitter) chip with a 28-pin SSOP package.
Key Functions:
- 4 independent UART channels, each configurable for baud rates up to 3Mbps.
- Supports 5V/3.3V operation.
- SPI or parallel bus interface for host communication.
- Built-in 128-byte FIFO for each UART to reduce CPU load.
- Features auto hardware flow control (RTS/CTS) and software flow control (XON/XOFF).
Pinout Highlights:
- VCC/GND: Power supply (5V/3.3V) and ground.
- TXD/RXD: UART transmit/receive lines (4 channels).
- SCLK/MOSI/MISO/CS: SPI interface pins (if SPI mode is used).
- INT: Interrupt output for event notification.
Compact and versatile, it’s ideal for multi-UART expansion in embedded systems.
Key Functions:
- 4 independent UART channels, each configurable for baud rates up to 3Mbps.
- Supports 5V/3.3V operation.
- SPI or parallel bus interface for host communication.
- Built-in 128-byte FIFO for each UART to reduce CPU load.
- Features auto hardware flow control (RTS/CTS) and software flow control (XON/XOFF).
Pinout Highlights:
- VCC/GND: Power supply (5V/3.3V) and ground.
- TXD/RXD: UART transmit/receive lines (4 channels).
- SCLK/MOSI/MISO/CS: SPI interface pins (if SPI mode is used).
- INT: Interrupt output for event notification.
Compact and versatile, it’s ideal for multi-UART expansion in embedded systems.
Application
The WK2124-ISSG is a 4-channel UART (Universal Asynchronous Receiver/Transmitter) chip with SPI/I2C interfaces, widely used in:
1. Industrial Automation – Multi-device communication in control systems.
2. IoT Devices – Expanding serial ports for sensors and modules.
3. Embedded Systems – Interface conversion in microcontrollers.
4. Consumer Electronics – Enabling multi-peripheral connectivity.
5. Telecom & Networking – Managing serial data in routers/switches.
6. Automotive Electronics – Supporting in-vehicle communication networks.
Its compact design and multi-channel capability make it ideal for applications requiring efficient serial communication expansion.
1. Industrial Automation – Multi-device communication in control systems.
2. IoT Devices – Expanding serial ports for sensors and modules.
3. Embedded Systems – Interface conversion in microcontrollers.
4. Consumer Electronics – Enabling multi-peripheral connectivity.
5. Telecom & Networking – Managing serial data in routers/switches.
6. Automotive Electronics – Supporting in-vehicle communication networks.
Its compact design and multi-channel capability make it ideal for applications requiring efficient serial communication expansion.
Package
The WK2124-ISSG is a UART (Universal Asynchronous Receiver/Transmitter) interface IC, typically available in a QFN (Quad Flat No-leads) package. It features a compact, surface-mount design for efficient PCB space utilization. Common variants include QFN-32 (5x5mm), but verify the exact package size and pin count in the datasheet for your specific model.
