圖片僅供參考
URB2405YMD-20WR3
+物料清單DC DC CONVERTER 5V 20W
-
製造商Mornsun美國有限責任公司
-
製造商部分 #URB2405YMD-20WR3
-
有存貨16221
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Series | URB2405YMD-20WR3 (20W) |
| Part Status | Not For New Designs |
| Type | Isolated Module |
| Number of Outputs | 1 |
| Voltage - Input (Min) | 9V |
| Voltage - Input (Max) | 36V |
| Voltage - Output 1 | 5V |
| Current - Output (Max) | 4A |
| Applications | ITE (Commercial) |
| Operating Temperature | -40°C ~ 105°C |
| Efficiency | 90% |
| Mounting Type | Through Hole |
| Package / Case | 6-DIP Module |
| Size / Dimension | 1.00" L x 1.00" W x 0.46" H (25.4mm x 25.4mm x 11.7mm) |
| Power (Watts) | 20 W |
| Voltage - Isolation | 1.5 kV |
| Approval Agency | CB, CE, cURus |
概述
Description
"Introduction to URB2405YMD-20WR3" likely refers to a university or college course code. While I don't have specific details about this exact course, I can provide a general idea based on typical course structures:
URB courses often relate to urban studies, urban planning, or urban development. An introductory course in this field would likely cover the basics of urban theory, the history of urbanization, and the impact of urban planning on society and the environment. It might also explore topics like zoning, land use, and urban policy.
The course code "2405" could indicate the course's level, suggesting it's perhaps a second-year undergraduate course. The "YMD-20WR3" portion may refer to specific sections, terms, or other internal coding used by the institution.
To get precise information, including course content, objectives, and prerequisites, you would need to consult the course catalog or syllabus from the educational institution offering this course. If you're a student, reaching out to the instructor or academic advisor for detailed insights might be helpful.
URB courses often relate to urban studies, urban planning, or urban development. An introductory course in this field would likely cover the basics of urban theory, the history of urbanization, and the impact of urban planning on society and the environment. It might also explore topics like zoning, land use, and urban policy.
The course code "2405" could indicate the course's level, suggesting it's perhaps a second-year undergraduate course. The "YMD-20WR3" portion may refer to specific sections, terms, or other internal coding used by the institution.
To get precise information, including course content, objectives, and prerequisites, you would need to consult the course catalog or syllabus from the educational institution offering this course. If you're a student, reaching out to the instructor or academic advisor for detailed insights might be helpful.
Equivalent
The URB2405YMD-20WR3 is a DC-DC converter module. Equivalent products can include similar DC-DC converters with matching input/output voltage, power rating, and form factor. Some potential equivalents are:
1. Mean Well SD-25A-05
2. RECOM RSD-24-05
3. Traco Power TEN 20-2411
4. XP Power JCE0512S05
5. CUI Inc. PQME24-D05
Always verify the detailed specifications to ensure compatibility in your specific application.
1. Mean Well SD-25A-05
2. RECOM RSD-24-05
3. Traco Power TEN 20-2411
4. XP Power JCE0512S05
5. CUI Inc. PQME24-D05
Always verify the detailed specifications to ensure compatibility in your specific application.
Features
The URB2405YMD-20WR3 is a DC-DC converter module known for its high efficiency and compact design. Key features include:
1. Wide Input Voltage Range: It supports a broad input voltage range, typically around 18-36V or 36-75V, making it versatile for various applications.
2. Output Voltage: The module provides a stable output voltage, often at 5V, suitable for powering digital circuits and other electronic devices.
3. Power Output: It offers a power output of up to 20 watts, sufficient for medium power applications.
4. Efficiency: High efficiency, often over 85%, which reduces energy loss and minimizes heat generation.
5. Isolation: The module includes isolation between input and output, enhancing safety and reducing the risk of electrical interference.
6. Compact Size: Its small form factor makes it ideal for space-constrained applications.
7. Protection Features: Built-in protections such as over-current, over-voltage, and short-circuit protection ensure reliable operation.
These features make the URB2405YMD-20WR3 suitable for industrial, telecommunications, and other applications that require efficient power conversion.
1. Wide Input Voltage Range: It supports a broad input voltage range, typically around 18-36V or 36-75V, making it versatile for various applications.
2. Output Voltage: The module provides a stable output voltage, often at 5V, suitable for powering digital circuits and other electronic devices.
3. Power Output: It offers a power output of up to 20 watts, sufficient for medium power applications.
4. Efficiency: High efficiency, often over 85%, which reduces energy loss and minimizes heat generation.
5. Isolation: The module includes isolation between input and output, enhancing safety and reducing the risk of electrical interference.
6. Compact Size: Its small form factor makes it ideal for space-constrained applications.
7. Protection Features: Built-in protections such as over-current, over-voltage, and short-circuit protection ensure reliable operation.
These features make the URB2405YMD-20WR3 suitable for industrial, telecommunications, and other applications that require efficient power conversion.
Pinout
The URB2405YMD-20WR3 is a DC-DC converter module. It typically has a 6-pin configuration. Here is a brief overview of its pin functions:
1. Vin (Input Voltage): This pin is used to connect the input voltage supply. The module is designed to accept a specific range of input voltages.
2. GND (Ground): This pin serves as the reference ground for both input and output sides of the converter.
3. Vout (Output Voltage): This pin provides the regulated output voltage, which is the primary function of the DC-DC converter.
4. CTRL (Control): This pin is used to enable or disable the module, allowing for remote on/off control of the converter.
5. NC (No Connection): Some variants might have a pin that is not electrically connected within the module. It can be used for mechanical support in the PCB design.
6. Trim: This pin allows for the adjustment of the output voltage, enabling fine-tuning to meet specific application requirements.
The URB2405YMD-20WR3 is part of the URB_YMD-20WR3 series, known for delivering high efficiency and reliable performance in converting DC voltages.
1. Vin (Input Voltage): This pin is used to connect the input voltage supply. The module is designed to accept a specific range of input voltages.
2. GND (Ground): This pin serves as the reference ground for both input and output sides of the converter.
3. Vout (Output Voltage): This pin provides the regulated output voltage, which is the primary function of the DC-DC converter.
4. CTRL (Control): This pin is used to enable or disable the module, allowing for remote on/off control of the converter.
5. NC (No Connection): Some variants might have a pin that is not electrically connected within the module. It can be used for mechanical support in the PCB design.
6. Trim: This pin allows for the adjustment of the output voltage, enabling fine-tuning to meet specific application requirements.
The URB2405YMD-20WR3 is part of the URB_YMD-20WR3 series, known for delivering high efficiency and reliable performance in converting DC voltages.
Manufacturer
The URB2405YMD-20WR3 is manufactured by MORNSUN, a Chinese company. MORNSUN specializes in the design and production of power supply solutions, including AC/DC converters, DC/DC converters, isolation transmitters, IGBT drivers, and LED drivers. They serve a wide range of industries such as industrial, telecommunications, medical, and automotive sectors. MORNSUN is known for its focus on innovation and quality in its power modules and solutions.
Application
The URB2405YMD-20WR3 is a DC-DC converter, commonly used in various applications due to its efficiency and reliability. Key application areas include:
1. Industrial Automation: Provides stable power conversion for sensors and controllers.
2. Telecommunications: Supplies reliable power for communication equipment.
3. Medical Devices: Ensures precise power management for sensitive medical equipment.
4. Transportation: Supports electronic systems in vehicles and railway infrastructure.
5. Renewable Energy Systems: Facilitates power conversion in solar and wind energy applications.
Its compact size and high power density make it suitable for use in compact and space-constrained environments.
1. Industrial Automation: Provides stable power conversion for sensors and controllers.
2. Telecommunications: Supplies reliable power for communication equipment.
3. Medical Devices: Ensures precise power management for sensitive medical equipment.
4. Transportation: Supports electronic systems in vehicles and railway infrastructure.
5. Renewable Energy Systems: Facilitates power conversion in solar and wind energy applications.
Its compact size and high power density make it suitable for use in compact and space-constrained environments.
Package
The URB2405YMD-20WR3 is a DC-DC converter module typically housed in a standard DIP (Dual In-line Package) form. This type of packaging is designed for through-hole mounting on printed circuit boards, providing a robust and efficient solution for power conversion applications.
