圖片僅供參考
規格
| 屬性 | 價值 |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| AmplifierType | CMOS |
| NumberofCircuits | 1 |
| OutputType | Rail-to-Rail |
| SlewRate | 1.5V/µs |
| GainBandwidthProduct | 3 MHz |
| Current-InputBias | 1 pA |
| Voltage-InputOffset | 750 µV |
| Current-Supply | 150µA |
| Voltage-SupplySpan(Min) | 1.8 V |
| Voltage-SupplySpan(Max) | 5.5 V |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | SC-74A, SOT-753 |
概述
Description
The TLV314IDBVR is a precision operational amplifier from Texas Instruments. It is part of the TLV314 series, which is designed for low-power applications requiring high performance. This op-amp features a low quiescent current, wide bandwidth, and rail-to-rail input and output capabilities, making it suitable for battery-powered and portable devices.
Key specifications include a supply voltage range of 1.8V to 5.5V, a low offset voltage, and a wide bandwidth of 3 MHz. The TLV314IDBVR operates with a single supply and is characterized by low noise and distortion, making it ideal for filtering, buffering, and sensor signal conditioning applications.
The device is packaged in a small SOT-23-5 package, which enhances its suitability for space-constrained designs. Additionally, it is designed to operate over a wide temperature range, typically from -40°C to +125°C. Its performance efficiency and small form factor make the TLV314IDBVR a versatile choice for various electronic applications such as consumer electronics, instrumentation, and industrial controls.
Key specifications include a supply voltage range of 1.8V to 5.5V, a low offset voltage, and a wide bandwidth of 3 MHz. The TLV314IDBVR operates with a single supply and is characterized by low noise and distortion, making it ideal for filtering, buffering, and sensor signal conditioning applications.
The device is packaged in a small SOT-23-5 package, which enhances its suitability for space-constrained designs. Additionally, it is designed to operate over a wide temperature range, typically from -40°C to +125°C. Its performance efficiency and small form factor make the TLV314IDBVR a versatile choice for various electronic applications such as consumer electronics, instrumentation, and industrial controls.
Equivalent
The TLV314IDBVR is a low-power, single-channel operational amplifier. Equivalent products include the LMV321, MCP6001, and OPA345. These alternatives offer similar low-power consumption and performance characteristics suitable for cost-sensitive and space-constrained applications. Specific suitability should be verified based on the application's requirements such as voltage range, bandwidth, and package type.
Features
The TLV314IDBVR is a single-channel operational amplifier (op-amp) from Texas Instruments. It features a low-power, rail-to-rail input and output with a wide supply voltage range, making it suitable for various applications. Key features include:
1. Low Power Consumption: It operates with a low quiescent current, ideal for battery-powered applications.
2. Supply Voltage Range: Supports a wide range from 1.8V to 5.5V, offering flexibility for different voltage requirements.
3. Rail-to-Rail Input and Output: Enables full use of the supply voltage range, maximizing dynamic range.
4. High Slew Rate: Capable of quick response times, suitable for high-speed applications.
5. Low Input Bias Current: Minimizes error and is beneficial for high-impedance sensor interfaces.
6. Compact Package: Comes in a SOT-23 package, saving space on the circuit board.
7. Wide Bandwidth: Provides a sufficient frequency range for numerous general-purpose applications.
8. Temperature Range: Operates effectively across a wide industrial temperature range.
These features make the TLV314IDBVR versatile for use in sensors, data acquisition, and portable devices.
1. Low Power Consumption: It operates with a low quiescent current, ideal for battery-powered applications.
2. Supply Voltage Range: Supports a wide range from 1.8V to 5.5V, offering flexibility for different voltage requirements.
3. Rail-to-Rail Input and Output: Enables full use of the supply voltage range, maximizing dynamic range.
4. High Slew Rate: Capable of quick response times, suitable for high-speed applications.
5. Low Input Bias Current: Minimizes error and is beneficial for high-impedance sensor interfaces.
6. Compact Package: Comes in a SOT-23 package, saving space on the circuit board.
7. Wide Bandwidth: Provides a sufficient frequency range for numerous general-purpose applications.
8. Temperature Range: Operates effectively across a wide industrial temperature range.
These features make the TLV314IDBVR versatile for use in sensors, data acquisition, and portable devices.
Pinout
The TLV314IDBVR is an operational amplifier from Texas Instruments. It comes in a 5-pin SOT-23 package. The function of this op-amp is to amplify voltage signals in a wide range of applications, including sensor signal conditioning, active filtering, and general-purpose amplification.
Here's a brief description of the pin functions:
1. Pin 1 (OUT): This is the output pin where the amplified signal is available.
2. Pin 2 (V- or GND): This is the negative power supply or ground pin.
3. Pin 3 (IN+ or non-inverting input): This pin is the non-inverting input where the signal to be amplified is applied.
4. Pin 4 (IN- or inverting input): This is the inverting input pin, which is used to apply feedback or another signal for differential amplification.
5. Pin 5 (V+ or VCC): This is the positive power supply pin.
The TLV314IDBVR is widely used for its low power consumption and ability to operate on a single supply voltage, making it suitable for battery-powered devices.
Here's a brief description of the pin functions:
1. Pin 1 (OUT): This is the output pin where the amplified signal is available.
2. Pin 2 (V- or GND): This is the negative power supply or ground pin.
3. Pin 3 (IN+ or non-inverting input): This pin is the non-inverting input where the signal to be amplified is applied.
4. Pin 4 (IN- or inverting input): This is the inverting input pin, which is used to apply feedback or another signal for differential amplification.
5. Pin 5 (V+ or VCC): This is the positive power supply pin.
The TLV314IDBVR is widely used for its low power consumption and ability to operate on a single supply voltage, making it suitable for battery-powered devices.
Manufacturer
The TLV314IDBVR is manufactured by Texas Instruments (TI). Texas Instruments is a global technology company that designs and manufactures semiconductors and various integrated circuits, which it sells to electronics designers and manufacturers across the world. TI's products are used in a wide array of applications, including industrial, automotive, personal electronics, and communications equipment. The company is known for its innovative solutions in analog and embedded processing technologies.
Application
The TLV314IDBVR is a low-power operational amplifier commonly used in various applications due to its precision and efficiency. Key application areas include:
1. Portable Devices: Utilized for signal conditioning in battery-operated gadgets due to its low power consumption.
2. Sensor Interfaces: Ideal for amplifying signals from sensors in industrial and consumer electronics.
3. Medical Equipment: Used in diagnostic and monitoring devices requiring reliable performance.
4. Wearable Technology: Supports low-power designs in health and fitness wearables.
5. Data Acquisition Systems: Enhances signal integrity in data collection and processing units.
These applications benefit from the TLV314IDBVR's small footprint, making it suitable for compact circuit designs.
1. Portable Devices: Utilized for signal conditioning in battery-operated gadgets due to its low power consumption.
2. Sensor Interfaces: Ideal for amplifying signals from sensors in industrial and consumer electronics.
3. Medical Equipment: Used in diagnostic and monitoring devices requiring reliable performance.
4. Wearable Technology: Supports low-power designs in health and fitness wearables.
5. Data Acquisition Systems: Enhances signal integrity in data collection and processing units.
These applications benefit from the TLV314IDBVR's small footprint, making it suitable for compact circuit designs.
Package
The TLV314IDBVR is an operational amplifier from Texas Instruments, and it comes in a SOT-23-6 package type.
