規格
| 屬性 | 價值 |
| Supplier | Texas Instruments,Rochester Electronics, LLC |
| Package | Tape & Reel (TR),Cut Tape (CT),Bulk |
| Series | LinCMOS™ |
| ProductStatus | Active |
| Type | Differential |
| NumberofElements | 2 |
| OutputType | CMOS, MOS, Open-Drain, TTL |
| Voltage-SupplySingle/Dual(±) | 3V ~ 16V, ±1.5V ~ 8V |
| Voltage-InputOffset(Max) | 5mV @ 5V |
| Current-InputBias(Max) | 5pA @ 5V |
| Current-Output(Typ) | 20mA |
| Current-Quiescent(Max) | 400µA |
| OperatingTemperature | 0°C ~ 70°C |
| Package/Case | 8-TSSOP (0.173, 4.40mm Width) |
| MountingType | Surface Mount |
概述
Description
The TLC372CPWR is a Texas Instruments dual operational amplifier (two op-amps in one 8-pin device) from the TLC372 family. It’s designed for low-power, general-purpose amplification in small-signal analog circuits.
Key points:
- Two independent op-amps in a single package; suitable for buffering, filtering, and simple signal conditioning.
- Low quiescent current and compatibility with single- or dual-supply operation.
- Typical uses include sensor interfacing, audio preamps, active filters, and other small-signal applications.
How to use:
- Configure each amplifier in standard topologies (inverting/non-inverting, integrator, etc.).
- Provide appropriate supply voltages and decouple near the device.
- Implement feedback networks per your circuit design.
Packaging:
- Available in an 8-pin package; check the exact packaging variant from TI (PB Free, tape-and-reel, etc.).
For exact electrical specs (supply range, bandwidth, offset, slew rate) and recommended operating conditions, consult the TLC372CPWR datasheet.
Key points:
- Two independent op-amps in a single package; suitable for buffering, filtering, and simple signal conditioning.
- Low quiescent current and compatibility with single- or dual-supply operation.
- Typical uses include sensor interfacing, audio preamps, active filters, and other small-signal applications.
How to use:
- Configure each amplifier in standard topologies (inverting/non-inverting, integrator, etc.).
- Provide appropriate supply voltages and decouple near the device.
- Implement feedback networks per your circuit design.
Packaging:
- Available in an 8-pin package; check the exact packaging variant from TI (PB Free, tape-and-reel, etc.).
For exact electrical specs (supply range, bandwidth, offset, slew rate) and recommended operating conditions, consult the TLC372CPWR datasheet.
Equivalent
Exact cross-ref depends on the exact specs, but common equivalents for a dual, low-power op-amp like TLC372CPWR are:
- TI OPA2372
- TI TLV2372
- TI TLC272
- Microchip MCP6002
Verify voltage range, rail-to-rail I/O, and package before swapping.
- TI OPA2372
- TI TLV2372
- TI TLC272
- Microchip MCP6002
Verify voltage range, rail-to-rail I/O, and package before swapping.
Features
Key features of TLC372CPWR (TI):
- Dual CMOS operational amplifiers in an 8-pin package
- Rail-to-rail input and output
- Single-supply operation (typ. 2.7 V to 5.5 V)
- Low quiescent current (low-power operation)
- Unity-gain stable
- Input common-mode includes the negative rail; outputs can swing near rails
- Short-circuit protection and current limiting
- Suitable for battery-powered, compact applications
Note: For exact electrical specs (GBW, input offset, noise, temperature range, etc.), please refer to the specific datasheet.
- Dual CMOS operational amplifiers in an 8-pin package
- Rail-to-rail input and output
- Single-supply operation (typ. 2.7 V to 5.5 V)
- Low quiescent current (low-power operation)
- Unity-gain stable
- Input common-mode includes the negative rail; outputs can swing near rails
- Short-circuit protection and current limiting
- Suitable for battery-powered, compact applications
Note: For exact electrical specs (GBW, input offset, noise, temperature range, etc.), please refer to the specific datasheet.
Pinout
- Pin count: 8 pins (8-pin package)
- Function: Dual operational amplifier (two op-amps in one package)
- Function: Dual operational amplifier (two op-amps in one package)
Manufacturer
- Manufacturer: Texas Instruments Incorporated (TI).
- What kind of company: American multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits, processors, and related electronics components.
- What kind of company: American multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits, processors, and related electronics components.
Application
TLC372CPWR is a low-power CMOS op-amp. Common application areas:
- Battery-powered and portable instrumentation
- Sensor conditioning (thermistors, RTDs, photodiodes, strain gauges)
- ADC/DAC driver and input buffering for microcontroller interfaces
- Active filters (low/high/band-pass) and general signal conditioning
- Transimpedance amplifiers for photodiode applications
- Small-signal amplification and biasing in precision measurement circuits
- Servo/analog control loops and offset summing in analog front-ends
Note: it offers single-supply operation with rail-to-rail I/O, suitable for compact, low-voltage designs.
- Battery-powered and portable instrumentation
- Sensor conditioning (thermistors, RTDs, photodiodes, strain gauges)
- ADC/DAC driver and input buffering for microcontroller interfaces
- Active filters (low/high/band-pass) and general signal conditioning
- Transimpedance amplifiers for photodiode applications
- Small-signal amplification and biasing in precision measurement circuits
- Servo/analog control loops and offset summing in analog front-ends
Note: it offers single-supply operation with rail-to-rail I/O, suitable for compact, low-voltage designs.
Package
TLC372CPWR is in an 8-pin MSOP (Mini Small Outline) package.
