圖片僅供參考
規格
| 屬性 | 價值 |
| Package / Case | Tube |
| Part Status | Active |
| Amplifier Type | J-FET |
| Number of Circuits | 2 |
| Slew Rate | 3.5V/µs |
| Gain Bandwidth Product | 1 MHz |
| Current - Input Bias | 30 pA |
| Voltage - Input Offset | 3 mV |
| Supply Current | 200µA (x2 Channels) |
| Current - Output / Channel | 20 mA |
| Voltage - Supply Span(Min) | 10 V |
| Voltage - Supply Span(Max) | 30 V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Through Hole |
概述
Description
The TL062IP is a low-power, dual operational amplifier (op-amp) from Texas Instruments, designed for applications requiring both low-power consumption and good performance. It belongs to the wider TL06x series, recognized for their low input bias and offset currents, which make them suitable for precision applications. The "P" in TL062IP indicates the package type, typically an 8-pin PDIP (Plastic Dual In-line Package).
Key features include a wide bandwidth of 1 MHz, low input bias current of typically 30 pA, and a low power-supply current of approximately 200 μA per amplifier. It operates over a wide supply voltage range from ±3V to ±15V, making it versatile for various analog signal processing tasks. The TL062IP is optimal for battery-powered devices due to its low power consumption, and it is often used in audio pre-amplifiers, active filters, and integrators.
The device is characterized by its low total harmonic distortion, ensuring minimal signal distortion, and is often used in applications where preserving signal integrity is crucial.
Key features include a wide bandwidth of 1 MHz, low input bias current of typically 30 pA, and a low power-supply current of approximately 200 μA per amplifier. It operates over a wide supply voltage range from ±3V to ±15V, making it versatile for various analog signal processing tasks. The TL062IP is optimal for battery-powered devices due to its low power consumption, and it is often used in audio pre-amplifiers, active filters, and integrators.
The device is characterized by its low total harmonic distortion, ensuring minimal signal distortion, and is often used in applications where preserving signal integrity is crucial.
Equivalent
The TL062IP is a low-power JFET-input operational amplifier. Equivalent products include:
1. LM358 - Offers similar low-power consumption but with bipolar inputs.
2. TL072 - Higher slew rate and bandwidth, but similar JFET inputs.
3. TL082 - Similar to TL072 with slightly different specifications.
4. LF353 - A dual JFET-input op-amp with similar characteristics.
5. CA3140 - Combines JFET input with a bipolar output stage.
Ensure to check the specific parameters and requirements as variations exist among these alternatives.
1. LM358 - Offers similar low-power consumption but with bipolar inputs.
2. TL072 - Higher slew rate and bandwidth, but similar JFET inputs.
3. TL082 - Similar to TL072 with slightly different specifications.
4. LF353 - A dual JFET-input op-amp with similar characteristics.
5. CA3140 - Combines JFET input with a bipolar output stage.
Ensure to check the specific parameters and requirements as variations exist among these alternatives.
Features
The TL062IP is a low-power JFET-input operational amplifier. Key features include:
1. Low Power Consumption: Ideal for battery-operated devices due to its reduced power draw.
2. Wide Bandwidth: Offers a decent bandwidth for a variety of applications despite its low power usage.
3. Low Noise: Provides low input noise voltage, suitable for audio and precision applications.
4. High Input Impedance: JFET inputs ensure high input impedance, beneficial for interfacing with high-impedance sources.
5. Wide Supply Voltage Range: Operates over a wide range of supply voltages, typically from ±3V to ±15V.
6. Low Input Bias Current: Minimizes errors due to input bias currents, improving performance in high-impedance circuits.
7. Common-Mode Input Voltage Range: Includes the negative supply, enhancing flexibility in single-supply operations.
These features make the TL062IP suitable for applications in audio processing, signal conditioning, and sensor interfacing where low power consumption and low noise are critical.
1. Low Power Consumption: Ideal for battery-operated devices due to its reduced power draw.
2. Wide Bandwidth: Offers a decent bandwidth for a variety of applications despite its low power usage.
3. Low Noise: Provides low input noise voltage, suitable for audio and precision applications.
4. High Input Impedance: JFET inputs ensure high input impedance, beneficial for interfacing with high-impedance sources.
5. Wide Supply Voltage Range: Operates over a wide range of supply voltages, typically from ±3V to ±15V.
6. Low Input Bias Current: Minimizes errors due to input bias currents, improving performance in high-impedance circuits.
7. Common-Mode Input Voltage Range: Includes the negative supply, enhancing flexibility in single-supply operations.
These features make the TL062IP suitable for applications in audio processing, signal conditioning, and sensor interfacing where low power consumption and low noise are critical.
Pinout
The TL062IP is a dual operational amplifier IC with a total of 8 pins. The functions of each pin are as follows:
1. Pin 1 (Output A): This is the output for the first operational amplifier (Op-Amp A).
2. Pin 2 (Inverting Input A): This pin is the inverting input for the first operational amplifier.
3. Pin 3 (Non-Inverting Input A): This is the non-inverting input for the first operational amplifier.
4. Pin 4 (V- or Ground): This pin is connected to the negative supply voltage or ground.
5. Pin 5 (Non-Inverting Input B): This is the non-inverting input for the second operational amplifier (Op-Amp B).
6. Pin 6 (Inverting Input B): This pin is the inverting input for the second operational amplifier.
7. Pin 7 (Output B): This is the output for the second operational amplifier.
8. Pin 8 (V+ or Vcc): This pin is connected to the positive supply voltage.
The TL062IP is designed for low power consumption and improved performance in audio and sensor applications.
1. Pin 1 (Output A): This is the output for the first operational amplifier (Op-Amp A).
2. Pin 2 (Inverting Input A): This pin is the inverting input for the first operational amplifier.
3. Pin 3 (Non-Inverting Input A): This is the non-inverting input for the first operational amplifier.
4. Pin 4 (V- or Ground): This pin is connected to the negative supply voltage or ground.
5. Pin 5 (Non-Inverting Input B): This is the non-inverting input for the second operational amplifier (Op-Amp B).
6. Pin 6 (Inverting Input B): This pin is the inverting input for the second operational amplifier.
7. Pin 7 (Output B): This is the output for the second operational amplifier.
8. Pin 8 (V+ or Vcc): This pin is connected to the positive supply voltage.
The TL062IP is designed for low power consumption and improved performance in audio and sensor applications.
Manufacturer
The TL062IP is manufactured by Texas Instruments. Texas Instruments, commonly referred to as TI, is an American technology company that designs and manufactures semiconductors and various integrated circuits. It serves a wide range of industries including consumer electronics, automotive, industrial, and communications. TI is known for its significant role in the development and production of analog and embedded processing components.
Application
The TL062IP is a low-power, dual JFET-input operational amplifier. Its application areas include:
1. Signal Amplification: Used in audio preamplifiers and sensor signal conditioning due to its low noise and distortion characteristics.
2. Active Filters: Suitable for building active filters in communication and audio systems.
3. Instrumentation: Ideal for precision instrumentation applications owing to its high input impedance.
4. Data Acquisition Systems: Used in ADC and DAC buffering circuits.
5. Analog Computing: Applied in integrators, differentiators, and analog computers for mathematical operations.
6. Medical Devices: Utilized in low-power bio-instrumentation equipment.
Its low power consumption makes it suitable for battery-powered and portable devices.
1. Signal Amplification: Used in audio preamplifiers and sensor signal conditioning due to its low noise and distortion characteristics.
2. Active Filters: Suitable for building active filters in communication and audio systems.
3. Instrumentation: Ideal for precision instrumentation applications owing to its high input impedance.
4. Data Acquisition Systems: Used in ADC and DAC buffering circuits.
5. Analog Computing: Applied in integrators, differentiators, and analog computers for mathematical operations.
6. Medical Devices: Utilized in low-power bio-instrumentation equipment.
Its low power consumption makes it suitable for battery-powered and portable devices.
Package
The TL062IP is an operational amplifier that comes in a PDIP (Plastic Dual In-line Package) with 8 pins.
