規格
| 屬性 | 價值 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT),Bulk |
| Part Status | Active |
| Type | Transceiver |
| Protocol | CANbus |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 120 mV |
| Data Rate | 5Mbps |
| Voltage - Supply | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 150°C |
| Mounting Type | Surface Mount |
概述
Description
The TJA1043T,118 is a high-speed CAN (Controller Area Network) transceiver designed to interface between a CAN protocol controller and the physical two-wire CAN bus. Manufactured by NXP Semiconductors, it is part of their portfolio of CAN transceivers. The TJA1043T,118 offers reliable communication in automotive and industrial applications, meeting the ISO 11898-2 and ISO 11898-5 standards for high-speed CAN. It features several key functionalities, including low electromagnetic emission (EME) and high electromagnetic immunity (EMI), making it suitable for use in noisy environments.
The transceiver supports a wide range of supply voltages and includes a low-power standby mode to reduce energy consumption when the bus is inactive. It also features an SPI interface for microcontroller connectivity and diagnostics. Additionally, the TJA1043T,118 provides fault-tolerant capabilities, ensuring stable operation under various bus conditions, such as short-circuits or termination failures. Its robust design and compliance with stringent automotive standards make it suitable for use in safety-critical applications. Overall, the TJA1043T,118 is ideal for reliable and efficient CAN communication in modern automotive networks.
The transceiver supports a wide range of supply voltages and includes a low-power standby mode to reduce energy consumption when the bus is inactive. It also features an SPI interface for microcontroller connectivity and diagnostics. Additionally, the TJA1043T,118 provides fault-tolerant capabilities, ensuring stable operation under various bus conditions, such as short-circuits or termination failures. Its robust design and compliance with stringent automotive standards make it suitable for use in safety-critical applications. Overall, the TJA1043T,118 is ideal for reliable and efficient CAN communication in modern automotive networks.
Equivalent
The TJA1043T,118 is a high-speed CAN transceiver by NXP. Equivalent products include:
1. MCP2562 (Microchip Technology)
2. SN65HVD230 (Texas Instruments)
3. ATA6561 (Microchip Technology)
4. ADM3053 (Analog Devices)
These equivalents offer similar functionalities like high-speed CAN communication, low power modes, and enhanced ESD protection. Always check datasheets for specific feature comparisons to ensure compatibility with your application.
1. MCP2562 (Microchip Technology)
2. SN65HVD230 (Texas Instruments)
3. ATA6561 (Microchip Technology)
4. ADM3053 (Analog Devices)
These equivalents offer similar functionalities like high-speed CAN communication, low power modes, and enhanced ESD protection. Always check datasheets for specific feature comparisons to ensure compatibility with your application.
Features
The TJA1043T is a high-speed CAN (Controller Area Network) transceiver manufactured by NXP Semiconductors. It is designed for automotive and industrial applications and is part of the TJA1043 series. Key features include:
1. High-Speed Communication: Supports data rates up to 1 Mbps, suitable for high-speed CAN networks.
2. Low Power Modes: Includes standby and sleep modes to reduce power consumption when the bus is idle.
3. Fail-Safe Features: Includes bus-fault protection and under-voltage detection to improve reliability.
4. Silent Mode: Allows the transceiver to monitor bus traffic without actively participating, useful for diagnostics without interfering with operations.
5. Electromagnetic Compatibility (EMC): Designed with optimized signal integrity and reduced electromagnetic emissions.
6. Thermal Protection: Includes thermal shutdown protection to prevent damage due to overheating.
7. Wide Supply Range: Operates typically at 5V, but can handle variations, making it robust for different power conditions.
8. ISO 11898-2 Compliance: Meets the specifications for high-speed CAN transceivers.
The TJA1043T is ideal for automotive and industrial systems requiring reliable and efficient data communication.
1. High-Speed Communication: Supports data rates up to 1 Mbps, suitable for high-speed CAN networks.
2. Low Power Modes: Includes standby and sleep modes to reduce power consumption when the bus is idle.
3. Fail-Safe Features: Includes bus-fault protection and under-voltage detection to improve reliability.
4. Silent Mode: Allows the transceiver to monitor bus traffic without actively participating, useful for diagnostics without interfering with operations.
5. Electromagnetic Compatibility (EMC): Designed with optimized signal integrity and reduced electromagnetic emissions.
6. Thermal Protection: Includes thermal shutdown protection to prevent damage due to overheating.
7. Wide Supply Range: Operates typically at 5V, but can handle variations, making it robust for different power conditions.
8. ISO 11898-2 Compliance: Meets the specifications for high-speed CAN transceivers.
The TJA1043T is ideal for automotive and industrial systems requiring reliable and efficient data communication.
Pinout
The TJA1043T,118 is a high-speed CAN transceiver from NXP Semiconductors. It features an 8-pin package. The functions of these pins are as follows:
1. TXD (Transmit Data Input): Controls the data input for the CAN bus.
2. RXD (Receive Data Output): Provides the received data output from the CAN bus.
3. VCC (Supply Voltage): Provides the main supply voltage for the transceiver.
4. GND (Ground): Ground reference for the transceiver.
5. CANH (CAN High): The high-level CAN bus line.
6. CANL (CAN Low): The low-level CAN bus line.
7. STB (Standby Input): Used to switch the transceiver between normal operation and low-power standby mode.
8. VIO (Logic Supply Voltage Input): Provides a separate supply voltage for the digital I/O pins, enabling compatibility with lower voltage microcontrollers.
The TJA1043T,118 is designed for automotive applications, providing high-speed data transmission and robust electromagnetic compatibility.
1. TXD (Transmit Data Input): Controls the data input for the CAN bus.
2. RXD (Receive Data Output): Provides the received data output from the CAN bus.
3. VCC (Supply Voltage): Provides the main supply voltage for the transceiver.
4. GND (Ground): Ground reference for the transceiver.
5. CANH (CAN High): The high-level CAN bus line.
6. CANL (CAN Low): The low-level CAN bus line.
7. STB (Standby Input): Used to switch the transceiver between normal operation and low-power standby mode.
8. VIO (Logic Supply Voltage Input): Provides a separate supply voltage for the digital I/O pins, enabling compatibility with lower voltage microcontrollers.
The TJA1043T,118 is designed for automotive applications, providing high-speed data transmission and robust electromagnetic compatibility.
Manufacturer
The TJA1043T,118 is manufactured by NXP Semiconductors. NXP is a global semiconductor company that specializes in the design and production of high-performance mixed-signal solutions. The company is known for its work in the automotive, industrial, and Internet of Things (IoT) markets, among others. NXP Semiconductors provides solutions that enable secure connections for a smarter world, focusing on innovations in automotive electronics, secure identification, wireless infrastructure, lighting, and more. With a significant emphasis on research and development, NXP aims to meet the evolving requirements of technology-driven industries, making it a key player in the semiconductor sector.
Application
The TJA1043T,118 is a high-speed CAN (Controller Area Network) transceiver commonly used in automotive and industrial applications. Key application areas include:
1. Automotive Systems: Facilitates reliable in-vehicle communication for powertrain, body electronics, and infotainment systems.
2. Industrial Automation: Used in factory automation systems for robust communication in harsh environments.
3. CAN Networks: Supports efficient data exchange in complex CAN network architectures.
4. Electric and Hybrid Vehicles: Assists in efficient energy management and communication between various electronic control units.
5. Safety Systems: Plays a role in advanced driver-assistance systems (ADAS) for real-time data transmission.
Its low power consumption and high-speed communication capabilities make it suitable for applications requiring efficient and reliable data transfer.
1. Automotive Systems: Facilitates reliable in-vehicle communication for powertrain, body electronics, and infotainment systems.
2. Industrial Automation: Used in factory automation systems for robust communication in harsh environments.
3. CAN Networks: Supports efficient data exchange in complex CAN network architectures.
4. Electric and Hybrid Vehicles: Assists in efficient energy management and communication between various electronic control units.
5. Safety Systems: Plays a role in advanced driver-assistance systems (ADAS) for real-time data transmission.
Its low power consumption and high-speed communication capabilities make it suitable for applications requiring efficient and reliable data transfer.
Package
The TJA1043T,118 is a high-speed CAN transceiver in an SO8 (Small Outline) package.
