圖片僅供參考
TIP31C1A
+物料清單3A, 100V, NPN SILICON TRANSISTOR
-
製造商哈裡斯公司
-
製造商部分 #TIP31C1A
-
有存貨8338
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Package / Case | Bulk |
| Part Status | Active |
概述
Description
The TIP31C1A is a type of NPN bipolar junction transistor (BJT) known for its general-purpose amplification and switching capabilities. Commonly used in electronic circuits, this transistor is part of the TIP31 series, which is designed to handle medium power applications. It features a collector-emitter voltage (V_CE) rating of approximately 100V and can handle a continuous collector current (I_C) of up to 3A, making it suitable for driving loads like lamps, relays, or small motors.
The TIP31C1A has a gain (β) value that typically ranges from 10 to 50, which dictates its amplification factor. It is housed in a TO-220 package, allowing for efficient heat dissipation through a heatsink if necessary. Its applications include audio amplification, signal processing, and switching applications in both industrial and consumer electronics.
To use the TIP31C1A effectively, proper biasing is essential, and it is often used with complementary transistors like TIP32 (PNP) for push-pull amplifier configurations. Its robustness and reliability make it a popular choice among hobbyists and professionals alike.
The TIP31C1A has a gain (β) value that typically ranges from 10 to 50, which dictates its amplification factor. It is housed in a TO-220 package, allowing for efficient heat dissipation through a heatsink if necessary. Its applications include audio amplification, signal processing, and switching applications in both industrial and consumer electronics.
To use the TIP31C1A effectively, proper biasing is essential, and it is often used with complementary transistors like TIP32 (PNP) for push-pull amplifier configurations. Its robustness and reliability make it a popular choice among hobbyists and professionals alike.
Equivalent
The TIP31C1A is a general-purpose NPN bipolar junction transistor. Equivalent products include:
1. TIP31C
2. 2N3053
3. BD139
4. 2N1711
5. MJE3055
These transistors have similar electrical characteristics and can be used in similar applications, but always check the datasheets to ensure compatibility based on your specific requirements.
1. TIP31C
2. 2N3053
3. BD139
4. 2N1711
5. MJE3055
These transistors have similar electrical characteristics and can be used in similar applications, but always check the datasheets to ensure compatibility based on your specific requirements.
Features
The TIP31C1A is an NPN bipolar junction transistor (BJT) designed for general-purpose amplification and switching applications. Key features include:
1. Collector-Emitter Voltage (Vceo): It can withstand a maximum collector-emitter voltage of 100V.
2. Collector Current (Ic): The transistor can handle a continuous collector current of up to 3A.
3. Power Dissipation: It has a power dissipation capability of 40W, making it suitable for medium power applications.
4. DC Current Gain (hFE): Typically offers a DC current gain ranging from 10 to 50, allowing for effective amplification in circuits.
5. Package: Comes in a TO-220 package, which provides good thermal performance and ease of mounting on heat sinks for better heat dissipation.
6. Operating Temperature Range: It operates effectively within a temperature range of -65°C to +150°C.
These features make the TIP31C1A suitable for various electronic applications, including audio amplifiers, power regulation, and switching devices.
1. Collector-Emitter Voltage (Vceo): It can withstand a maximum collector-emitter voltage of 100V.
2. Collector Current (Ic): The transistor can handle a continuous collector current of up to 3A.
3. Power Dissipation: It has a power dissipation capability of 40W, making it suitable for medium power applications.
4. DC Current Gain (hFE): Typically offers a DC current gain ranging from 10 to 50, allowing for effective amplification in circuits.
5. Package: Comes in a TO-220 package, which provides good thermal performance and ease of mounting on heat sinks for better heat dissipation.
6. Operating Temperature Range: It operates effectively within a temperature range of -65°C to +150°C.
These features make the TIP31C1A suitable for various electronic applications, including audio amplifiers, power regulation, and switching devices.
Pinout
The TIP31C is a commonly used NPN bipolar junction transistor (BJT). However, it appears there might be a typo or misunderstanding in your request, as "TIP31C1A" isn't a recognized or standard part number. Assuming you are referring to the TIP31C, here is the relevant information:
- Pin Count: The TIP31C transistor typically comes in a TO-220 package and has 3 pins.
- Pin Functions:
1. Pin 1 (Base): This is the control pin used to turn the transistor on or off. A small current at the base controls a larger current between the collector and the emitter.
2. Pin 2 (Collector): This pin is the input where the main current flows in from the power supply.
3. Pin 3 (Emitter): The current flows out through this pin to the rest of the circuit.
The TIP31C is commonly used in amplification and switching applications due to its ability to handle relatively high current and voltage.
- Pin Count: The TIP31C transistor typically comes in a TO-220 package and has 3 pins.
- Pin Functions:
1. Pin 1 (Base): This is the control pin used to turn the transistor on or off. A small current at the base controls a larger current between the collector and the emitter.
2. Pin 2 (Collector): This pin is the input where the main current flows in from the power supply.
3. Pin 3 (Emitter): The current flows out through this pin to the rest of the circuit.
The TIP31C is commonly used in amplification and switching applications due to its ability to handle relatively high current and voltage.
Manufacturer
The TIP31C1A is manufactured by STMicroelectronics. STMicroelectronics is a global semiconductor company that designs, develops, manufactures, and markets a broad range of semiconductor products used in various microelectronics applications. The company serves various sectors including automotive, industrial, personal electronics, and communications equipment. It is known for its innovations in semiconductor solutions that address the challenges of designing energy-efficient, high-performance, and intelligent digital products.
Application
The TIP31C1A is an NPN bipolar junction transistor (BJT) commonly used in various applications due to its medium current and voltage capabilities. Its application areas include:
1. Audio Amplification: Used in audio amplifiers for boosting sound signals.
2. Switching Circuits: Functions as a switch in electronic devices and circuits.
3. Power Regulation: Employed in power regulation circuits to manage voltage and current.
4. Motor Control: Utilized in controlling motors in robotics and industrial applications.
5. Signal Amplification: Used for amplifying weak signals in communication devices.
These applications take advantage of its ability to handle moderate power levels efficiently.
1. Audio Amplification: Used in audio amplifiers for boosting sound signals.
2. Switching Circuits: Functions as a switch in electronic devices and circuits.
3. Power Regulation: Employed in power regulation circuits to manage voltage and current.
4. Motor Control: Utilized in controlling motors in robotics and industrial applications.
5. Signal Amplification: Used for amplifying weak signals in communication devices.
These applications take advantage of its ability to handle moderate power levels efficiently.
Package
The TIP31C1A is typically available in a TO-220 package. The TO-220 is a widely used package type for transistors and other components, offering good heat dissipation and ease of mounting for various applications.
