圖片僅供參考
TEMD6200FX01
+物料清單SENSOR PHOTODIODE 540NM 0805
-
製造商Vishay半導體光電事業部
-
製造商部分 #TEMD6200FX01
-
有存貨2542
365 天品質保證
7*24 小時服務保證
90-日售後保障
正品保證
規格
| 屬性 | 價值 |
| Supplier | Vishay Semiconductor Opto Division |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | Automotive, AEC-Q101 |
| Part Status | Active |
| Wavelength | 540nm |
| Spectral Range | 430nm ~ 610nm |
| Diode Type | PIN |
| Response Time | 150ns |
| Voltage - DC Reverse (Vr) (Max) | 16 V |
| Current - Dark(Typ) | 100pA |
| Active Area | 0.27mm² |
| Viewing Angle | 120° |
| Operating Temperature | -40°C ~ 100°C |
| Mounting Type | Surface Mount |
概述
Description
TEMD6200FX01 appears to be a Toshiba TEMD‑series optoelectronic device (an IR photodetector/receiver). In general, TEMD parts are light sensors used for IR remote sensing or optical detection, housed in a small SMD package, with a current output that requires a simple conditioning circuit. Exact specs (wavelength range, responsivity, supply/pinout, package type) vary by variant, so please share the datasheet or vendor link for precise introduction. If you have context (sensor type, application, or a link), I can give a tight, model-specific summary.
Equivalent
Equivalent parts depend on the exact TEMD6200FX01 specs (supply voltage, output type, sensitivity, package). Please share the datasheet or key parameters. I can then give precise cross-references from Allegro, Melexis, Infineon, etc. Quick starting options (to verify later) include Allegro A1320/A1321 and Melexis MLX90316, but confirm compatibility before design.
Features
TEMD6200FX01 features (Toshiba Hall-effect switch):
- Unipolar Hall-effect switch with magnetic latch
- Open-collector output; requires a pull-up resistor
- Single-supply operation (typical 3–5.5 V)
- Magnetic operating threshold with hysteresis (ON above Bop, OFF below Br)
- Low power consumption
- Wide operating temperature range (industrial -40°C to +125°C)
- Small surface-mount package suitable for compact designs
- RoHS compliant with ESD protection
Note: Check the datasheet for exact voltage range, thresholds, and package details.
- Unipolar Hall-effect switch with magnetic latch
- Open-collector output; requires a pull-up resistor
- Single-supply operation (typical 3–5.5 V)
- Magnetic operating threshold with hysteresis (ON above Bop, OFF below Br)
- Low power consumption
- Wide operating temperature range (industrial -40°C to +125°C)
- Small surface-mount package suitable for compact designs
- RoHS compliant with ESD protection
Note: Check the datasheet for exact voltage range, thresholds, and package details.
Application
TEMD6200FX01 is a Hall-effect switch/sensor. Key applications:
- Non-contact magnetic position and speed sensing
- Rotary encoders and motor feedback (BLDC, stepper)
- Automotive sensors (crank/cam position, wheel speed, gear position)
- Proximity and door/lid detection
- Consumer electronics and appliance sensing
- Industrial sensing (limit switches, robotics, conveyors)
- General magnetic-field sensing in portable devices and wearables
Benefits: robust, contactless, low power, small package.
- Non-contact magnetic position and speed sensing
- Rotary encoders and motor feedback (BLDC, stepper)
- Automotive sensors (crank/cam position, wheel speed, gear position)
- Proximity and door/lid detection
- Consumer electronics and appliance sensing
- Industrial sensing (limit switches, robotics, conveyors)
- General magnetic-field sensing in portable devices and wearables
Benefits: robust, contactless, low power, small package.
Package
Surface-mount (SMD) package. It’s a two-terminal photodiode in a small SMD package.
